Lāzera līmeņa ierīce 4D, 16 līnijas, 365 cm teleskopiskais statīvs, 2 akumulatori, zaļš stars

Trumpai apie prekę

Prekė: Lazerinis gulsčiukas 4D, 16 linijų, 365 cm teleskopinis stovas, 2 akumuliatoriai, žalias spindulys. Kategorija: Lazeriniai gulsčiukai.

• Gamintojas: Durabuild
• Modelis: Durabuild Slim LCD
• Ilgis: 15 cm
• Svoris: 0.7 kg

🔥 DURABUILD — LASER SET FOR WORK WITHOUT COMPROMISE

🏗 DURABUILD is a polish brand of tools for people who do work on the construction site and in the finishing line. This set is a 4D cross laser with 16 lines complete with a expansion pole 365 cm, an additional lift with shelf and a green target. You get a complete system for routing walls, ceilings and floors, ready to go from the first use.

🟢 Green beam, 4 planes 360°, accuracy ±2 mm / 10 m, self-leveling and pilot. This is a set of parameters that really matter on the construction site.

😤 ENOUGH WITH REARRANGING THE LASER AND GUESSING THE REFERENCES

You know it from every job: the laser stands on the floor, and you need a line on the ceiling. The red beam dies in daylight, and to change the mode, you have to approach the device and set it again. In addition, a ladder, several stands and unnecessary minutes with each measurement.

• ❌ Laser without pole — you adjust the height on a ladder or on a pile of cartons.
• ❌ Poorly visible line — in a bright room you have to look for it with your eyes.
• ❌ No remote control — any mode change is walking to the device.

✅ This DURABUILD set closes the topic. The expansion pole sets the laser at the correct height, the green beam is clear, and the remote switches modes without touching the laser.

💪 BENEFITS YOU WILL FEEL FROM THE FIRST MEASUREMENT

• 🟢 16 lines in 4 planes 360° — one setting is enough to determine the level, vertical and corners of the entire room.
• 🎯 Accuracy ±2 mm / 10 m — equal rows of tiles, simple g-k board construction and carefully leveled cabinets.
• ⚡ Self-leveling in the range of ±4° — alignment takes approx. 4 seconds, and the tilt alarm lets you know when the laser is out of range.
• 📡 Pilot with H/V mode switching – you change the layout of the line from anywhere in the room.
• 🔆 Brightness adjustment — adjust the beam to the lighting in the room.
• ☀ Pulse mode — work with the detector outside.
• 📏 Tyczka 365 cm — laser under the ceiling without ladder and without makeshift supports.
• 🧲 Magnetic holder and 360° rotating base – quick attachment to metal profiles and precise angle setting.
• 🔋 2 Li-ion batteries and USB-C charging – you replace the power supply and keep working.

🏠 Application: laying glaze and panels, installation of suspended ceilings, buildings made of g-k boards, kitchens and cabinets to size, routing of electrical installations, installation of windows and doors.

⚔ COMPARISON: OTHER VERSUS OURS

Check how this set differs from typical construction laser offers:

• 🔴 Other: often the laser itself, and you buy the pole and accessories separately.

🟢 DURABUILD: laser, expansion pole 365 cm, two laser lifts and targeting disc in one set.

• 🔴 Others: usually fewer lines and fewer planes.
• 🟢 DURABUILD: 16 lines, 4 planes 360°, 4D layout.
• 🔴 Other: red beam, hardly visible in a bright room.
• 🟢 DURABUILD: green beam plus brightness adjustment.
• 🔴 Other: no remote control or no dust protection.
• 🟢 DURABUILD: H/V remote control and housing with IP54 degree of protection.
• 🔴 Other: one battery or cumbersome power supply in the field.
• 🟢 DURABUILD: 2 Li-ion batteries, USB-C charging.
• 🔴 Other: without a suitcase or in a thin box.
• 🟢 DURABUILD: case with foam for laser and all laser accessories.

📦 CONTENTS OF THE SET

🧰 4D cross laser with a set of accessories:

• ✅ laser 16 lines, green beam
• ✅ suitcase with foam
• ✅ 2 Li-ion batteries
• ✅ charger
• ✅ pilot
• ✅ lifting platform
• ✅ adapter 5/8 inch → 1/4 inch
• ✅ plate + magnetic holder
• ✅ glasses
• ✅ small tripod
• ✅ instruction PL

📏 Additional elements of the set:

• ✅ twisted expansion pole LMS-002, 365 cm — with laser lift and cover, 1/4 inch thread
• ✅ additional lift with shelf for laser per pole, 1/4 inch thread
• ✅ green targeting disc TP-001 — 10 x 7 cm, 2 magnets, scale in cm and inches

📋 SPECIFICATION

• 🏷 Brand: Durabuild
• 🟢 Type: 4D cross laser, self-leveling
• 🔢 Number of beams: 16 lines (4 planes 360°)
• 🎨 Beam color: green
• ↔ Line angles: horizontal 360°, vertical 360°
• 🎯 Accuracy: ±2 mm / 10 m
• 📡 Range: 30 m
• ⚙ Self-leveling: ±4°, alignment time approx. 4 s, tilt alarm, pendulum lock
• 🕹 Pilot: yes, switching H/V modes
• 🔆 Brightness adjustment: yes
• ☀ Pulse mode: yes (working with outdoor detector)
• 🔩 Attachment: 1/4 inch and 5/8 inch thread (adapter included), 360° rotating base, magnetic holder
• 🔋 Power Supply: 2 Li-ion batteries included, USB-C charging
• 🛡 Protection rating: IP54
• ⚠ Laser class: II
• 🌡 Working temperature: from -10°C to +45°C
• 📏 Tube: expansion, twisted LMS-002, 365 cm
• 🎯 Disc: TP-001, green, 10 x 7 cm, 2 magnets, cm and inch scale

🇵🇱 DURABUILD BRAND PROFILE

🛠 DURABUILD is a polish brand of tools and accessories for construction and finishing. We create equipment that is to withstand everyday work: routing, measurements, assembly, buildings.

• 🏗 What we do: measuring tools, mounting accessories and kits for professionals and ambitious DIYers.
• 🔧 Standard of workmanship: laser housing in the degree of protection IP54, pendulum lock protecting the mechanism, case with foam, thoughtful 1/4 inch and 5/8 inch threads.
• ✅ Proven products: sets are built around real work on the construction site. The laser, pole, elevator and dial work together without buying adapters.
• 🎯 For whom: for tilers, fitters, electricians, finishing crews and anyone who counts on a straight line.

💥 DURABUILD — tools built to work.

❓ FAQ — THE MOST COMMON QUESTIONS ABOUT THE PRODUCT

🟢 Does the laser level itself? Yes. Self-leveling works in the range of ±4°, and alignment takes approx. 4 seconds. When the laser is out of range, the tilt alarm is activated.

☀ Can you work outside? Yes. Turn on pulse mode and work with the detector. The housing has a protection rating of IP54.

🔋 How is the laser powered? By 2 Li-ion batteries from the set, charged by USB-C.

📏 To what height does the pole reach? The LMS-002 twisted expansion pole has 365 cm. You mount the laser on an elevator with a 1/4 inch thread, and the second elevator with a shelf gives additional space for the laser.

🔩 What threads does the laser support? 1/4 inch and 5/8 inch (5/8 inch → 1/4 inch adapter included). For this rotary base 360° and magnetic holder.

🕹 What is the pilot used for? For switching H/V modes without touching the laser. You adjust the brightness of the beam separately.

🎯 What is the accuracy? ±2 mm by 10 m, range up to 30 m.

🌡 What temperature does it work at? From -10°C to +45°C.

⚠ What is the laser class? Class II — do not look directly into the beam. Glasses are included.

🟩 What is the TP-001 shield used for? It is a green 10 x 7 cm targeting shield with 2 magnets and a scale in cm and inches that makes it easy to read the beam position.

Specifications