Lāzera līmeņrādis 16 līnijas, zaļš, ar uztvērēju, statīvu un turētāju

Trumpai apie prekę

Prekė: Lazerinis nivelyras 16 linijų, žalias, su imtuvu, stovu ir laikikliu. Kategorija: Lazeriniai gulsčiukai.

• Gamintojas: Firecore
• Modelis: F94 EL Laser Krzyżowy
• Ilgis: 14.5 cm
• Svoris: 0.9 kg

🏆FIRECORE 2026 - THE LATEST FLAGSHIP MODEL

✅ ELECTRONIC SELF-LEVELING

✅ 4D Line range 360°

✅ Accuracy 0,15 MM/M

✅ Class IP64 – shock, dust and water resistance

✅ Slanted mode

✅ Adjustable magnetic holder

✅ High visibility green beam

✅ Working range up to 30 meters

✅ Work with detector (up to 60 meters)

📦 CONTENTS OF THE PACK:

• 1× Laser level 16 lines
• 1× Receiver
• 1× Telescopic pole tripod 3.7m
• 1× 7,4V 2600mAh battery
• 1× Multifunctional magnetic holder
• 1× Remote control
• 1× Charger
• 1× Targeting Shield
• 1× Suitcase
• 1× User Manual

✅ TECHNICAL PARAMETERS:

• Model: F94 EL
• Leveling type: Electronic self-leveling (servo motor system)
• Accuracy (vertical / horizontal): ±1,5 mm / 10 m
• Self-leveling range: ±3,5°
• Height of the lower laser beam from the ground: 1,4 cm
• Protection class: IP64
• Laser class: Class 2 (IEC/EN 60825-1:2014), < 1 mW
• Laser wavelength: 505–520 nm (green beam)
• Mounting thread: 1/4" and 5/8"
• Working time (all beams included): approx. 5 hours
• Working range (radius): 30 m / (up to 60 m with FD30 detector)
• Power Supply: Lithium battery 7,4 V 2600 mAh (rechargeable)

✅ ACCURACY OF 0,15 MM/M – PRECISION THAT LEAVES NO ROOM FOR GUESSWORK

Effect in practice:

• The tiles come together perfectly without “stairs”,
• Cabinets hang evenly, without wedges and backing,
• Profiles, slats and buildings do not “run over” in length.

✅ “SOMEHOW IT WILL BE”? NOT HERE! ELECTRONIC SELF-LEVELING ELIMINATES HUMAN ERROR ON YOUR CONSTRUCTION SITE.

Electronic self-leveling (Servomotors): Instead of relying on a traditional gravitational pendulum, the equipment uses precise electronic sensors. When a deviation from the level is detected, the system immediately activates micro-servomotors, which actively correct the position of the lasers until an ideal, uncompromising level is achieved.

✅ 60 M RANGE? IT’S LIKE A 20-STORY BUILDING IN THE LASER’S SIGHT — YOU DON’T MULTIPLY MEASUREMENTS, YOU DON’T MULTIPLY ERRORS.

From the foundation to the roof or from one end of the square to the other. You set the laser once and you have one fixed reference for the entire order.

⚙ 4 OPERATING MODES:

🎯 Self-leveling mode

✋ Manual mode

🛡 Anti-shock mode

📡 Detector mode

⚙ PROFESSIONAL MANUAL MODE

After turning on and leveling the device, hold [M] for approx. 3 seconds. The indicator will start flashing. In this mode, the laser works at any angle (without alarm). To exit, hold [M] again.

Drop adjustment (X/Y axis):

Press briefly [TILT X/Y] to enable the double drop function (useful for drainage, terraces and slope work).

⚡ Fast LED flashing: Hold [H+] or [V-] to adjust the angle of the Y axis.

🐢 Slow flashing diode: Hold [:H+] or [V-] to adjust the angle of the X axis.

🛡 ANTI-SHOCK / TILT MODE

After turning on and automatically leveling the device, press [TILT X/Y]. When the LED stops flashing, the mode will be activated. To exit, press [TILT X/Y] again.

Principle of operation:

In this mode, any vibration, tilt or shift of the equipment will cause the beam and diode to flash continuously. This protects against measurement errors caused, e.g. wind or vibrations on the construction site.

ℹ Note: In this mode, you can use the detector (receiver) mode in parallel.

🛡 TIGHTNESS CLASS IP64

• Full dust protection and splash and rain resistance from any direction. Ideal equipment for harsh conditions on the construction site.
• Housing designed for special tasks – effectively protects sensitive optics from construction dust and unexpected rain, which significantly extends the life of the device.

🟪 MAXIMUM BRIGHTNESS AND RANGE THANKS TO OPTICAL COATING

The purple anti-reflective coating on the laser windows better focuses the diode beam, increasing the range and improving its visibility in difficult lighting conditions.

💡 LACK OF ELECTRICITY? NO PROBLEM — BATTERY WITH TYPE-C PORT AND ENERGY INDICATOR

✅ PRECISION IN 360° SPACE — 16 LINES / 4D AND 4 INDEPENDENT SYSTEM HEADS. IT'S LIKE FOUR LEVELS IN ONE TOOL!

✅ TECHNICAL DATA - RECEIVER:

Brand: FIRECORE

Model: FD30

Thread: 1/4''

Horizontal working range: 2 - 60 m

Precision: +/- 1.5 mm

Built-in libella: Yes (vertical, horizontal)

Optical signaling: Yes (bilateral)

Sound Signaling: Yes (Off)

Power Supply: 2X AAA Battery Included

Dimensions: 170 x 85 x 90 mm

Set weight: 280 g

Equipment: handle, battery, user manual

✅ TECHNICAL DATA - POLE:

• Material: aluminium
• Working range: from 76 to 370 cm
• Body lengths: 4x 60 cm + adjustable body 76 - 129cm
• Spreading body: 76 - 129 cm
• Mounting Thread: 1/4" + 5/8"
• Rod Thickness: 32 mm
• Divisions: marked on yellow post in inches
• Built-in libella in platform: Yes
• Set weight: 3.5 kg
• Equipment: cover, 5 bodies, platform, ceiling end

✅ TECHNICAL DATA - TRIPOD:

• Mounting Thread: 5/8''
• Bevel Adapter: 5/8''/1/4''
• Minimum height after folding: 48 cm
• Overall height (with extended seat post): 84 cm
• Retractable seat post: yes - 30 cm
• Leg Lock: Latches
• Built-in libella: yes
• Material: aluminum, plastic

Firecore is a brand created for both DIY enthusiasts and professionals working on construction sites on a daily basis. We focus on high comfort of use of equipment, which in addition to modern design is characterized by exceptional durability. For years, we have been providing reliable tools that streamline your work, save your time and meet the highest quality standards – often exceeding the expectations of users.

Specifications