Lazerinis nivelyras 4D, 16 linijų, 360°, žalias spindulys, 2 akumuliatoriai

Trumpai apie prekę

Prekė: Lazerinis nivelyras 4D, 16 linijų, 360°, žalias spindulys, 2 akumuliatoriai. Kategorija: Lazeriniai gulsčiukai.

• Gamintojas: no brand
• Modelis: 18036

Cross laser 4D ROTOR 16 lines – level and vertical visible immediately

When laying tiles, installing kitchen cabinets, building from GK boards or determining the line of the suspended ceiling, the error of a few millimeters can be revealed only at the very end, when corrections are already expensive and time-consuming. The traditional level and string require constant measuring, marking and transferring dimensions from one wall to another. The 4D ROTOR laser solves this problem. Displays 16 lines in 4 planes 360°, covering the entire room: walls, ceiling and floor at the same time. Thanks to this, you can easily transfer the level and vertical to subsequent surfaces and check the geometry of the work on an ongoing basis. The self-leveling function reduces the setting time to a minimum: you set the laser and it sets the exact lines. Less measuring, fewer corrections and a better end result.

The most important advantages of the ROTOR 4D laser

• 4 planes 360°. The lines cover the entire room around, so you don’t have to move the laser against every wall.
• 16 lines. Horizontal and vertical mesh on walls, ceiling and floor at the same time, ideal for finishing work.
• Self-leveling. The laser sets itself horizontally, which saves time and reduces the risk of error with manual calibration.
• Faster work. Less manual measurement and transfer of dimensions between surfaces.
• Battery power supply 3,7 V. Without buying batteries and without wires in the workplace.
• Universality. One tool for tiles, GK buildings, furniture assembly, suspended ceilings and installation.

What kind of work will the 4D laser work for?

Cross laser is one of those tools that is difficult to let go after the first use. The ROTOR 4D model will be useful for:

• laying tiles on walls and floors, where even grout and straight line are the basis,
• assembly of kitchen and bathroom cabinets, shelves, bodies and custom-made furniture,
• buildings made of plasterboard and installation of profiles,
• determining the lines of the suspended ceiling around the entire room at the same time,
• hanging images, lamps, curtain rods and deployment of electrical installation points.

It is a good choice for the tiler, carpenter, installer and finishing team, as well as for a person who independently renovates the apartment and wants to achieve a professional effect without constantly measuring the level.

Convenient and safe operation with laser

In order for the laser to point the lines precisely, set it on a stable ground, tripod or holder. The self-leveling function works within a certain tilt range, so with too much tilt, the device will signal that the lines are not leveled. Then it is enough to improve its setting. Once the job is done, lock the pendulum mechanism according to the instructions to protect it during transport.

Never look directly into a laser beam and do not direct it into the eyes of other people or animals. Store the device in a dry place, protect against drops and shocks that can affect its accuracy. Charge the battery according to the manufacturer’s instructions. Before the first use, read the instruction manual, which describes the inclusion of individual planes, self-leveling, charging and safety rules.

Technical data of ROTOR 4D

• Type: 4D cross laser, self-leveling
• Number of lines: 16
• Flats: 4 x 360°
• Accuracy: 0,2 mm
• Range: 10 m / 25 m
• Power supply: 3,7 V battery

What do these parameters mean in practice?

16 lines in 4 planes 360° creates a full grid of level and vertical throughout the room: on the walls, ceiling and floor. Self-leveling means that the laser itself sets the exact level, without manually setting the libella. Accuracy of 0,2 mm allows for precise finishing work. Range determines the distance at which the lines remain legible, and it depends on m.in. from ambient lighting. The 3,7 V battery provides battery-free operation.

How many lines does the laser display?

16 lines in 4 planes 360°.

Does the laser level itself?

Yes. It has a self-leveling function within a certain tilt range.

Is it suitable for laying tiles?

Yes. It will work well with tiles, cabinet assembly, GK buildings and suspended ceilings.

How is it powered?

With a 3,7 V battery.

Can I work in high sunlight?

In bright light, the lines are less visible, so you will get the best results in interiors.

Do I need to read the instructions before first use?

Yes. It describes operation, charging and safety rules.

Specifications