LED juostelė baldams su judesio jutikliu, USB, 1 m

Trumpai apie prekę

Prekė: LED juostelė baldams su judesio jutikliu, USB, 1 m. Kategorija: Rinkiniai.

• Gamintojas: Led
• Modelis: 1m

The tape is available in two versions:

• warm white (approx. 4300K)
• cold white (approx. 6000K)

Information regarding the selected color should be included in the order comment or in the message to the seller.

If no information is provided regarding the light color, we will send a WARM color.

The LED strip with a motion and twilight sensor is ideal for illuminating hard-to-reach places or those to which a power supply is problematic or even impossible. Perfect for illuminating wardrobes, shelves, furniture , etc.

Thanks to the built-in motion and twilight sensor, the strip can also be mounted in the corridor, in the toilet , as a bed or wardrobe lighting .

The tape is stuck onto the degreased surface using double-sided tape that covers the underside of the tape. It is possible to shorten the strip in the designated places on the strip - every single diode.

The tape is powered by 4 AAA batteries (not included) or a 5V phone charger with a microUSB cable (not included).

LED tape with motion and dusk sensor is a sensational solution for use in wardrobes and furniture. Thanks to the included sensor, when you open the cabinet, its interior will be automatically illuminated. It remains on as long as the motion sensor detects movement in the room. Ideally suited for bedside, hallway, stairs, toilet, mirrors, furniture, cabinets or under them. The sensor provides convenience, safety and energy savings.

CMotion sensor included in the set detects movement at a distance of 4 meters at an angle of 140°. The tape works in 3 modes: continuous, automatic night mode and automatic day and night mode.

The automatic lighting mode has a wide range of settings from 15 seconds to 5min of lighting. The product is battery powered (4xAAA), making it safe to use.

The tape and sensor are mounted using double-sided tape, which are covered from the bottom. The tape can be shortened every 1 diode, i.e. approx. 1,7cm.

LED tape has 3 operating modes:

• CONTINUOUS MODE – On/Off switch – lights all the time
• NIGHT MODE - setting the switch in this position activates the on/off of the LED tape as a result of detecting movement by the sensor only at night in a darkened room. The light sensor automatically recognizes day and night, so it only turns on in a dark room. Does not react during the day and with the light on.
• DAY AND NIGHT MODE - setting the switch in this position activates the on/off of the LED tape as a result of detecting movement by the sensor around the clock regardless of the intensity of light in the room

A wide timer range of 15 seconds to 5 minutes will allow you to set the ideal time for which the lighting is to be turned on.

Parameters of LED TAPE:

• Length: 100cm
• Color: white warm or cold
• Width: 8mm
• Waterproof coated with silicone
• Double-sided tape on the bottom

PYR MOTION SENSOR parameters:

• Power Supply: 4x AAA (battery not included) or micro USB cable (not included)
• Detection angle: 140°
• Motion detection range: up to 4m
• Dimensions: 15x3,7x1,5cm
• TIMER: 15 seconds – 5 minutes

Specifications