Lituoklio stotelė 2in1 706 II su karštu oru ir T12 antgaliais, plastiko suvirinimo įrankis

Trumpai apie prekę

Prekė: Lituoklio stotelė 2in1 706 II su karštu oru ir T12 antgaliais, plastiko suvirinimo įrankis. Kategorija: Lituokliai.

• Gamintojas: Yihua
• Modelis: ZESTAW-7B45-616FD
• Galia: 670 W
• Įtampa: 230 V

The kit includes a professional 2in1 Hot-Air soldering station that combines the function of a soldering iron and a heater, perfect for precise service work. The station is equipped with a soldering iron stand with a copper sponge, a layer of rosin and a wet sponge for effective cleaning of the tip, which ensures maintaining high quality work. The set also includes a 506A flask for quick replacement of T12 tips, with a T12-I tip, and three hot air nozzles (5mm, 7mm, 10mm), allowing flexible adjustment of air flow. The H50 plastic stapler, 200 staples, cutter and pliers complete the kit, creating a versatile tool for plastic repairs and soldering work, ideal for any precise repair tasks.

Product Features:

✅ Precise Hot Air technology enables fast and safe soldering of components, which increases work efficiency and minimizes the risk of damage to components.

✅ Built-in tip soldering iron offers stable operating parameters, which translates into confidence in soldering even the most demanding connectors.

✅ Compatibility with T12 tips ensures instant heating, saving time and avoiding interruptions.

✅ The power of 670W guarantees quick heating of both stations and tools, which significantly speeds up the soldering and repair process.

✅ Ergonomic design makes it easy to use the station, which makes work more comfortable, even for longer soldering sessions.

Soldering Station Specifications:

• Cable length: 135 cm - high temperature resistant cable
• Maximum soldering iron temperature: 480°C
• The possibility of using the tips of the model 245 with the appropriate flask (the heating time of the tip is about 4 seconds)
• Intuitive user interface
• Solid design with ESD SAFE
• Hot-Air hose length: about 105 cm resistant to high temperature
• Hot Air turbine : capacity 168l/min
• Maximum Hot-Air Temperature: 480°C
• Hot-Air function: in manual and automatic mode
• MAN MODE: allows you to place the gun on the stand without having to turn off the device
• CAR MODE: after placing the gun, the device goes into cooling mode and turns off to protect the resistance and extend its service life)
• Temperature display method: in degrees °F and °C
• Power supply voltage: 220V
• Station dimensions: 255 x 185 x 135 mm,
• Weight: about 3,5 kg

Soldering iron with T12 tips

⭐ High-quality tip soldering iron equipped with T12 tips ensures fast heating and stable operation, which is crucial when making precise connectors. The user can count on immediate readiness to work, which allows for faster completion of each project. T12 tips have a longer service life, which makes this tool reliable for a long time. Temperature stability ensures that even the most demanding tasks are completed with the utmost precision. It is a tool that will facilitate the work of anyone who values accuracy and speed in soldering. The "sleep" system automatically lowers the temperature to 200°C after 10 minutes of inactivity, protecting the tips from oxidation and prolonging their service life. Resuming work restores the device to the set temperature, which allows you to quickly continue soldering without wasting time

Advanced Hot Air Technology

⭐ Thanks to Hot Air technology, the Yihua 706 II soldering station provides precise and safe soldering with hot air, ideal for working with SMD components. The device reaches high temperatures in a short time, and temperature control from 100 to 480°C allows you to fully adapt the station to any project. The Twin Turbo system guarantees a constant, efficient flow of hot air, much higher than in traditional compressors, which enables accurate and durable soldering of even the most demanding components.

Quick Grotto Replacement and Express Heating

⭐ Soldering station Yihua 706 II offers a practical system for quick replacement of T12 tips with snap-on mounting, which allows you to quickly and safely change even hot tips. The 506A flask makes this process simple and quick. The built-in heater in the grotto allows for quick heating, reducing the waiting time – the temperature of 350°C is reached in just 10 seconds, which significantly speeds up the task. In the case of grots 245, intended for micro-repairs, heating time drops to 4 seconds, which increases efficiency and saves time during soldering.

Precise temperature control

⭐ Temperature sensor placed close to the solder tip of the tip allows accurate measurement and precise temperature regulation during soldering, which provides better control compared to traditional 900M tips. Advanced Samsung temperature control system reacts in real time, precisely adjusting the temperature of both soldering iron and hot air. This solution guarantees stable working conditions, providing excellent soldering results and optimizing the process for each project.

Two displays

⭐ The station is equipped with two displays that enable easy control and reading of operating parameters , such as temperature (in Celsius and Fahrenheit), blowing power, etc. This allows for precise control and adaptation of the device to the requirements of a specific task.

Possibility of calibration

⭐ The station can be calibrated according to your needs, both for the soldering iron and for Hot-Air. Calibration can be done with the appropriate command in the software, unlike other soldering devices, where it is necessary to open the device and adjust the calibration potentiometers.

❇ Set includes:

• Professional 2in1 Hot-Air Soldering Station
• Soldering iron stand with copper sponge and rosin layer
• Wet sponge for cleaning the tip
• Quick change flask 506A for T12 tips, with T12-I tip
• 3 hot air nozzles with a diameter of 5 mm, 7 mm and 10 mm
• Stapler for plastic H50
• 200 Staples
• knife
• pliers
• 50x “large wave” with a diameter of 0,8 mm
• 50x “inner angle” with a diameter of 0,8 mm
• 50x “small wave” with a diameter of 0,8 mm
• 50x “outer angle” with a diameter of 0,6 mm

✅ Set for repairing plastic elements

✅ Quick and easy repair is possible to remove/mask permanent cracks or weld plastic

✅ Includes 200 pieces of various spare "hot stapler" tips

✅ A handy suitcase is packed

✅ Perfectly suited for automotive, sports, hobbies and other industrial applications.

❌ Stapler sent in a random color - no choice of color.

✳ In the set you get a total of 200 staples for plastics of various shapes and purposes.

✔ Staple for plastic “small wave” - for simple, least demanding connections. To intensify the connection is gently wavy. It is also suitable for round objects.

✔ Staple for plastic “large wave” – for the most demanding and durable connections. Its sinosuidal shape provides the greatest bonding power. It is also suitable for round objects.

✔ Staple for plastic “external angle” - for connecting elements at an angle from the outside. It offers a range from acute to straight to slightly obtuse. However, remember to prepare it before welding (properly profiled).

✔ Staple for plastic “internal angle” - adapted to weld elements at an angle, from the inside of the connection.

Technical data:

⚡ Dimensions: 225x153mm

⚡ Dimensions of suitcase: 270x190mm

⚡ Power supply: 230V/0.5A

⚡ Power: 50W

⚡ Output current: 0 - 15A

❌ NOTE! Cutters included in the set are not used to cut metal elements, but to shape plastic.

Guide Welding plastic - in electronic version

A step-by-step guide that will guide you through the plastic welding process. Includes practical tips on selecting the right tools and materials, technical instructions and advice. You will gain the knowledge necessary for effective and professional plastic welding

Guide Soldering - electronic version

A practical step-by-step guide to will guide you through the soldering process. You will find valuable tips on choosing the right tools and materials, detailed technical instructions and tips useful in everyday work. The guide will provide you with the necessary knowledge for effective and professional soldering, both in electronics and in home repairs.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Power	670 W
Parametry	Manufacturer code	STACJA 2W1 DO LUTOWANIA SPAWANIA PLASTIKU
Parametry	EAN (GTIN)	5905902321398
Parametry	Maximum operating temperature	100°C
Parametry	Brand	Yihua
Parametry	Minimum operating temperature	480°C
Parametry	Model	ZESTAW-7B45-616FD
Parametry	Supply voltage	230 V
Parametry	Power supply	mains
Parametry	Kind	2-in-1 (hot air and tip)
Parametry	Packaging status	original
Parametry	Batteries included	no
Parametry	Certificates of conformity	CE