Maitinimo šaltinis PICOKOM 24V TELEVES TFORCE DAT BOSS, 2 išėjimai

Trumpai apie prekę

Prekė: Maitinimo šaltinis PICOKOM 24V TELEVES TFORCE DAT BOSS, 2 išėjimai. Kategorija: Antenos maitinimo šaltiniai.

• Gamintojas: Televes
• Modelis: 5795

APPLICATION IN TFORCE DAT BOSS, DAT BOSS MIX, DAT BOSS LR, DINOVA, V+ MIX USING 1 OR 2 OUTPUTS.

- High-efficiency switching power supply: up to 40% less power consumption

- Very low power consumption

- Aesthetic design and reduced dimensions: installation in housings with dimensions of 100x100 mm

- EasyF connection system

- Fully automated production subjected to rigorous quality checks

- Screwed to the wall

- Transitional losses vary depending on the number of outputs used

EasyF is an innovative connection system for internal (wire) coaxial cables. The conductor is introduced directly into the device, thereby increasing the reliability of the connection. In addition, thanks to the lack of F connectors, it is possible to reduce the dimensions of the device and secure two cables with one screw.

- Time saving: faster installation, no need to apply connectors to coaxial cables. In addition, the process of threading/winding connectors in the device is avoided, which is sometimes even impossible due to the lack of adequate space

- Reliable connection: the flange that holds the cable prevents the cable from loosening

- Cost savings: installation does not require additional type F or IEC connectors

- Optimization of space: inputs and outputs are located on the same side of the device, thanks to which cable bending is avoided and installation work is facilitated

- Three simple installation steps - connecting two cables only requires unscrewing and screwing the cover:

1. Unscrew the splitter cover to access the connection

2. Insert a pre-prepared coaxial cable

3. Close and screw the lid

Thanks to EasyF, the connection of the coaxial cable to the device is made through an automated system of inserting the cable conductor into the contact, without the need for welding.

- Longer life of the device: elimination of welds extends the life of the device

- Reduction of failure rates, usually caused by cold welding

- Optimization of electromagnetic interaction at high frequencies

- Strengthening our commitment to the environment: no pollution from welding processes and less power consumption in production processes

- Power supply type: internal

- Outputs 2 type EasyF

- Operating frequency 5-862MHz

- Losses on 1 output 1,5dB, on 2 outputs 4dB

- Output voltage 24V

- Output current 130mA

- Input current 35mA, 4,4W

- Mains voltage 196 - 264V (50-60Hz)

- EasyF connections

- Built-in fuse 800mA 250V

- Operating temperature -5 - 45 degrees Celsius

- Degree of protection IP20

- Weight 130g

- Dimensions: 90 x 68 x 28mm

- power supply

- power cable 90cm

- instruction

Specifications