Nerūdijančio plieno baseino šilumokaitis 60 kW, 480 x 134 mm

Trumpai apie prekę

Prekė: Nerūdijančio plieno baseino šilumokaitis 60 kW, 480 x 134 mm. Kategorija: Baseinų šildytuvai.

• Gamintojas: no brand
• Modelis: 60kw Heat Exchanger
• Galia: 60000 W

It is suitable for swimming pools, spas, hot tub tray heating, outdoor wood stoves, circulating heat, forced air heating, radiant floor heating, snow melting, solar hot water, and more.    It can be used with any type of pool water, whether treated or salt water.

• Model: MF-200
• Color: Silver
• Mount Type: Freestanding
• Assembly Required: Yes
• Material: SS304 Stainless Steel
• Process: Polishing
• Power: 60 kW
• Output: 200kBtu/h
• Pressure Test:
• Pool Water Circuit--10bar
• Hot Water Circuit--5bar
• Pressure Bearing: 2.5kg/ 5.51lbs
• Pool Water Flow: 250L/55 Gallon /min
• Hot Water Flow: 30L/6.6 Gallon /min
• Max Pressure: 145 PSI
• Max Temp: 110℃/230 °F
• Applicable Pool Volume: 250m³
• Product Size(D*H):13*48cm/5*19in
• Side Port Size: 5cm/2in
• Top Port Size: 3.5cm/1.4in
• Package Size: 49*17*17cm/19.29*6.69*6.69in
• Gross Weight: 4.7kg/10.36lbs

1* Swimming Pool Heat Exchanger

1* Chinese and English Manual

All Accessories for Use

• 1. Please check the style and size before purchasing.
• 2. Please read the instruction manual and label completely before installation and use, and pay particular attention to the safety instructions included.
• 3. Please note that the recommended maximum chloride concentration in fresh/clean water below 140°F in the exchanger is 300 mg/L and should be reduced as the water temperature increases. Exceeding the recommended chloride concentration or direct use of the chlorinator may result in stainless steel pitting. Titanium pool heat exchangers are recommended for use in environments with high chloride concentrations or in salt water systems.
• 4. Please note that the heat exchanger is always installed in a counter flow pattern and should be installed downstream of the filter and pump equipment. It must be auxiliary to the boiler water and take the usual precautions to prevent air locks.
• 5. People must not be in the water while the heat exchanger is working.
• 6. Please do not put 2 heat exchangers into a swimming pool at the same time.
• 7. The product requires a heating circuit to work properly and a thermostat circuit to ensure a continuous thermostatic effect.
• 8. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement and make sure you do not mind before ordering.

• Pipeline Heat Dissipation: It can speed up the heat exchange rate and ensure the maximum rate of heat exchange.
• Efficient Pipeline Heat Dissipation: The internal piping design accelerates the rate of heat exchange, ensuring ideal thermal transfer performance is consistently achieved.
• Protective Housing:  A high-quality 304 stainless steel shield can protect the heating element from direct contact with people or animals, to protect your use of safety.
• Safety Housing: The premium 304 stainless steel outer shell encloses the heating element, preventing accidental contact with users or animals for utmost user safety.
• Reverse Outlet & Inlet: The inlet and outlet are reversed, both on opposite sides, which can optimize water flow dynamics and improve heat transfer efficiency.

Specifications