Oro kompresorius 10 bar, 1460 l/min, 3090, su tepalu

Trumpai apie prekę

Prekė: Oro kompresorius 10 bar, 1460 l/min, 3090, su tepalu. Kategorija: Kompresoriai.

• Gamintojas: Kowal Polska
• Modelis: KowaL 3090 10 Bar
• Galia: 5.5 kW
• Įtampa: 400 V

• enlarged valve seats for faster airflow
• original version on forged connecting rods
• Raised head heat sink
• metal air filter housings !
• increased compression ratio to 10 BAR
• steel, inter-valve head gasket is used
• oil lubrication, spray lubrication
• 3 ring pistons with a diameter of 90 mm

**** included 2 Liters of Ld100**** compressor oil

The compressor is air-cooled and oil-lubricated. Designed for painting, pumping, sandblasting, blowing and for all kinds of work with other pneumatic devices.

• forged connecting rods
• 5 pin head clamp (X-series)
• Interval seal with aluminium reinforcement
• oil cooler in compressor body
• reinforced cast paws
• metal air filters with hepa cartridges

• max suction capacity: 1460 L-min
• max working capacity: 1080 L-min
• required compressor rated speed: 800-1000 r/min
• oil bowl capacity: approx. 2 Liters
• required min engine power: 5,5 kw -7,5kW
• Suggested cylinder capacity: from 200 to 500L
• max. working pressure: 10 bar
• Weight: about 35 kg
• Piston diameter: 3 x 90 mm
• pulley diameter: 36 cm
• drive: 2 x V-belt 17 mm
• spacing of fixing screws: 25 x 17 cm
• direction of rotation: to the left (looking from the side of the wheel)
• oil used: compressor LD-100
• 1 replacement after 5 hours, then every 50 hours
• lubrication: spray
• cylinders: iron
• correct oil level: covered 3/4 slide
• Before each start, check the oil level. If necessary, complete its condition.

As one of the few companies in Europe, we offer compressors with a modern spacing of head fixing screws.

This allows the compressor to run much longer without damaging the gasket. The central screw screwed through the head into the valve plate additionally supports and presses the gasket crossbar in the intervalve chamber!

In addition, there are reinforced head pins.

The competition has on sale compressors with head attachment for 4 screws in such cases, after heating the head, the gasket blows out.

• Compressor 3090
• belt wheel 36 cm
• 3 complete air filters
• 1 infusion stopper
• 1 stopper with vent (odma)
• 2 Liters of LD-100 company oil (in bottles or poured into compressor )

• on our other auctions also available automation:connection tubes, check valves, pressure switches, relaxers, tubes for relaxers, etc.

• The compressor is equipped with a iron cylinder with increased ribbed (significantly better heat dissipation, an important technical aspect if the compressor is to be used in demanding and long-lasting activities)
• enlarged piston stroke - result in increased efficiency of up to max1460l/min!!
• large, enlarged pulley (36cm), acting as a fan

• better heat flow (heat dissipation) from piston to cylinder which has an even better effect on compressor life
• Seal, i.e. preventing oil from entering the oil chamber into the cylinder!!

• BRAND KowaL Polska - 10 YEARS OF EXPERIENCE IN THE PNEUMATIC INDUSTRY, THOUSANDS OF SATISFIED CUSTOMERS
• CERTIFIED PRODUCT WITH UNINFLATED PARAMETERS
• CERTAINTY OF PROFESSIONAL ADVICE ON PURCHASE AND SERVICE
• WE HAVE OUR OWN SERVICE (AVAILABILITY OF ALL PARTS TO OUR PRODUCTS DURING WARRANTY AND POST-WARRANTY TIME)
• ONLY WITH US THIS CLASS PRODUCT AT SUCH A LOW PRICE WHICH WILL BE USED IN ALL CONDITIONS IN WHICH IT WILL WORK!

Specifications