Oro kompresorius 10 bar, 550 L/min, alyvos pagrindu

Trumpai apie prekę

Prekė: Oro kompresorius 10 bar, 550 L/min, alyvos pagrindu. Kategorija: Kompresoriai.

• Gamintojas: Bizon Polska
• Modelis: 2070 Bizon Polska
• Galia: 2.2 kW
• Įtampa: 400 V

• Compressor + oil + filter

• New, improved design!
• 2 vents were used in the construction of this model
• side exhaust air cooler
• enlarged valve seats for faster airflow
• Raised head heat sink
• air outlet pipe with aluminium heat sink, ribbed
• increased compression ratio to 10 BAR

• max suction capacity: 550 L-min
• max working capacity: 336 L-min
• required min engine power: 2,2 kw
• Suggested cylinder capacity: 50 to 250 L
• required compressor rated speed: 800-1150 r/min
• max. working pressure: 10 bar
• Weight: about 15 kg
• Piston diameter: 2 x 70 mm
• pulley diameter: 26 cm
• Drive: 1 x 13 mm V-belt
• spacing of fixing screws: 13,5 x 14 cm
• direction of rotation: left (looking from the side of the wheel)
• oil used: compressor LD-100
• 1 replacement after 5 hours, then every 50 hours
• lubrication: splash
• Cylinders: cast iron
• correct oil level: covered 3/4 slide
• Check the oil level before each startup. If necessary, supplement its condition.

Bizon Polska compressor pumps are the result of a combination of the latest technologies in the field of air compression, and many years of experience. They are characterized by extremely high efficiency, reliability and long service life thanks to the use of high-quality materials, components with low friction coefficient and the use of technical and technological achievements. The quality of compressor pumps was also achieved through strict control at all stages of production and through stringent final tests. The large crankcases, cast iron cylinders and block elements made of cast aluminium used in the pumps guarantee effective heat dissipation.

• 2 piston compressor (2 x 70 mm)
• air filter
• 2 mounting screws
• 2 ventilators
• compressor and tube outlet heat sink fitting
• Oil Ld-100 (in bottle or poured into compressor)

• The compressor is equipped with a iron cylinder with increased ribbed (significantly better heat dissipation, an important technical aspect if the compressor is to be used in demanding and long-lasting activities)
• enlarged piston stroke - result in increased efficiency
• large, enlarged pulley (15cm), acting as a fan

• better heat flow (heat dissipation) from piston to cylinder which has an even better effect on compressor life
• Seal, i.e.

Dual filtration of the discharged air from the inside of the compressor ensures better separation of oil vapours.

The distinguishing feature of the offered model is a large 26 cm pulley which is both an efficient and effective compressor fan.

Increases the thermal efficiency of the compressor, cools the air even before it reaches the cylinder.

The colder the air goes into the cylinder, the smaller the losses due to cooling of the air in the tank / reducing the volume of air.

Thread in heat sink : internal thread BSP 3/4" (~26mm)

Outlet nipple guineas : external thread JIC UNF 3/4"-16 (~19mm)

• Clear oil level indicator. Correct oil level: covered 3/4 slide

• spacing of fixing screws: 13,5 x 14 cm

• POLISH BRAND
• We have been operating on the market since 2005
• WE HAVE RICH EXPERIENCE IN PNEUMATIC INDUSTRY, THOUSANDS OF SATISFIED CUSTOMERS
• CERTIFIED PRODUCT WITH UNINFLATED PARAMETERS
• CERTAINTY OF PROFESSIONAL ADVICE ON PURCHASE AND SERVICE
• WE HAVE OUR OWN SERVICE (AVAILABILITY OF ALL PARTS TO OUR PRODUCTS DURING WARRANTY AND POST-WARRANTY TIME)

Specifications