Oro kompresorius 100 l, 12 bar, stūmoklinis, Professional

Trumpai apie prekę

Prekė: Oro kompresorius 100 l, 12 bar, stūmoklinis, Professional. Kategorija: Kompresoriai.

• Gamintojas: Kowal Polska
• Modelis: SBN-ZV2048 12 Bar
• Galia: 3.5 kW
• Įtampa: 230 V

• + oil + filters + dehydrator + reducer + cylinder fitting

• Already on sale -New, best 7th generation blacksmith
• enlarged valve seats for faster airflow
• Raised head heat sink
• enlarged diameter of the cooling turbine
• oil lubrication, splash lubrication
• three-ring plungers

• Height: approx. 80 cm
• length: approx. 90 cm
• Width: approx. 48 cm

The company KowaL Polska, with this model, was one of the first to introduce the FORGED CONNECTING RODS system. Thanks to this solution, even after many years of use, there is no oval on connecting the piston with the pin!

The air pump pumps air into a 12 Bar pressure cylinder. The switch (receipt) disconnects the pump when filling a tank of 10 Bar. Thanks to the use of a pump with 20% stock, the unit is not strained, which significantly translates into its service life!

• Our compressor has a cylinder with approval with a real capacity of 100 Liters !
• tank dimensions : diameter 40 cm x length 80 cm
• If you run a company under the supervision of a labour inspectorate, know that we add all documents to each compressor to be reported in UDT

His 100L cylinder punching times are:

1. 0 to 1 bar = 19 s 316 L/min
2. 0 to 2 bar = 40 s 300 L/min
3. 0 to 3 bar = 55 s 327 L/min
4. from 0 to 4 bar = 1 min 15 s 320 L/min
5. from 0 to 5 bar = 1 min 37 s 310 L/min
6. 0 to 6 bar = 2 min 300 L/min
7. from 0 to 7 bar = 2 min 25 s 290 L/min
8. from 0 to 8 bar = 2 min 55 s 274 L/min
9. from 0 to 9 bar = 3 min 27 s 260 L/min
10. from 0 to 10 bar = 4 min 250 L/min

1. Pistons made of duralumin. 3 rings on pistons. Piston diameter up to 48 mm!

2. Pump base on two full and solid mounting paws

3. Two starting relaxers (final and starting)

4. Vent (odma) with ball valve inside

5. Two capacitors! blacksmith starts even in winter!

6. Mounted Overcurrent Fuse + Thermal Fuse Directly at Motor Winding

7. Tank dehydrator

8. Robust metal filters with effective HEPA cartridges!

9. Reinforced connecting rods with cast iron counterweight for reduced vibration

10. Cast iron cylinders with honing sleeve - perfect distribution of oil film

• suction capacity max: 530 L-min
• max working capacity: 390 L/min
• pressure max: 12 Bar
• working pressure: 10 Bar
• tank: 100 L
• Rated power (on motor shaft): 2,2 kw
• max engine power consumption: 3,5 kw (3500 watt)
• number of working sockets: 3
• oil pan capacity: approx. 0,4 Liter
• power supply: 230v
• Frequency: 50 / 60 Hz
• Volume: 97 dB
• Weight: approx. 55 kg
• Piston system: V
• Number of pistons: 2
• diameter of pistons: 48 mm
• pressure reducer: YES
• Dehydrator: YES
• overload protection: YES
• built-in starting relaxer: YES
• induction motor: YES
• certificates: YES
• Declaration of conformity: YES
• built-in safety valve !
• oil used: compressor LD-100
• 1 replacement after 5 hours, then every 50 hours
• lubrication: splash
• Cylinders: cast iron
• correct oil level: covered 3/4 slide
• Check the oil level before each start. If necessary, supplement its condition.

• 0,4 L oil ( 2 x 0,2L or 1 x 0,4L)
• 2 running wheels with rubberized raceway
• 2 anti-vibration feet
• 1/2'' quick-connector for cylinder mounting
• integrated dehydrator with reducer and 2 fittings
• 2 metal filters with HEPA cartridges
• Mounting screws
• vent with ball valve
• condensate drain in the tank

• silence the compressor operation
• do not throttling the air flow
• do not melt for longer work
• resistant to mechanical damage

• Duralumin pistons: 2 x 48 mm !
• 3 rings
• cast iron cylinders
• steel valve plates
• Quiet operation
• increased piston stroke o compared to the previous model
• clear oil level indicator
• large vent with ball valve. (orange plastic) Before starting the compressor, screw it into the compressor in place of the oil filler

• overload protection
• enlarged cooling turbine
• induction motor - brushless
• copper motor winding
• Large, 5-blade fan resulting in an even more efficient cooling system
• Compressor mounted on 4 shock-absorbing rubber - greater compressor working culture
• Efficient induction motor with overload fuse with max power consumption 3000 watt
• Additional second output for possible installation of another quick-connector with thread 1/2"

• better heat flow (heat dissipation) from the piston to the cylinder, which has an even better effect on the life of the compressor
• Sealing, i.e. preventing oil from entering the oil chamber into the cylinder!!

ONLY WITH US!! AN ESSENTIAL ELEMENT IN PAINTING WORKS!

Each compressor in the set has a separator with a dehydrator.

This element captures all impurities from the exhaust air (water, oil, solids).

It has a capacious reservoir and a manual valve for condensate-pollution drain.

• automatic pressure switch
• direct manometer
• Direct quick coupler
• automatic relaxer

• powder coated cylinder with anti-corrosion protection
• cycle welded numerically by welding machines - please pay attention to the perfect quality of welds!
• Bottle with homologation !

• Thanks to this solution, you have access to a large and immediate amount of air, unlimited switch or filter.
• It is ideal for blowing, pumping truck tires, or powering large pneumatic wrenches

Please pay attention to the cylinder finishes, the quality of welds at the highest level, which are made by state-of-the-art welding machines.

• BRAND blacksmith - 10 YEARS OF EXPERIENCE IN THE PNEUMATICS INDUSTRY, THOUSANDS OF SATISFIED CUSTOMERS
• CERTIFIED PRODUCT WITH UNINFLATED PARAMETERS
• CERTAINTY OF PROFESSIONAL ADVICE ON PURCHASE AND SERVICE
• WE HAVE OUR OWN SERVICE (AVAILABILITY OF ALL PARTS TO OUR PRODUCTS DURING WARRANTY AND POST-WARRANTY TIME)
• ONLY WITH US THIS CLASS PRODUCT AT SUCH A LOW PRICE WHICH WILL BE USED IN ALL CONDITIONS IN WHICH IT WILL WORK!

Specifications