Oro kompresorius 50 l, 12 bar, profesionalus, alyvos stūmoklinis

Trumpai apie prekę

Prekė: Oro kompresorius 50 l, 12 bar, profesionalus, alyvos stūmoklinis. Kategorija: Kompresoriai.

• Gamintojas: Kowal Polska
• Modelis: zbv50+c20
• Galia: 3 kW
• Įtampa: 230 V

• + oil + filters + dehydrator + reducer + cylinder fitting
• + spiral hose 20m with a diameter of 8mm

• Already on sale -New, best 7th generation blacksmith
• enlarged valve seats for faster airflow
• Raised head heat sink
• enlarged diameter of the cooling turbine
• oil lubrication, splash lubrication
• 2 x 48 mm diameter three-ring pistons

• Height: approx. 63 cm
• length: approx. 75 cm
• Width: approx. 40 cm

The air pump pumps air into a 12 Bar pressure cylinder. The switch (recessor) disconnects the pump when filling a tank of 10 Bar. Thanks to the use of a pump with 20% stock, the unit is not strained, which significantly translates into its service life!

• Our compressor has a cylinder with approval with a real capacity of 50 L !
• tank dimensions: diameter 30 cm x length 69 cm
• If you run a company under the supervision of a labour inspectorate, know that we add all documents to each compressor to be reported in UDT

The Zbv50 model with the SBN-ZV2048 pump looks great compared to the competition. His 50L cylinder punching times are:

1. 0 to 1 bar = 7s 428 L/min
2. 0 to 2 bar = 13 s 428 L/min
3. 0 to 3 bar = 22 s 409 L/min
4. 0 to 4 bar = 30 s 400 L/min
5. 0 to 5 bar = 42 s 357 L/min
6. 0 to 6 bar = 54 s 333 L/min
7. from 0 to 7 bar = 1 min 6 s 318 L/min
8. from 0 to 8 bar = 1 min 20 s 300 L/min
9. from 0 to 9 bar = 1 min 35 s 284 L/min
10. from 0 to 10 bar = 1 min 50 s 272 L/min

DEAR CUSTOMER! We are proud to inform you that in our 15 years of production and sale of compressors of various brands, this Compressor model is the most efficient and reliable 50L project we have ever dealt with.

1. Pistons made of duralumin. 3 rings per piston. Piston diameter is 48 mm!

2. Pump base with two full and sturdy mounting feet

3. Two starting decompression valves (final and start)

4. Air vent (crankcase breather) with an internal ball valve

5. BEST ENGINE. Two starting capacitors (120uF) connected in parallel to the engine (not in series).! blacksmith starts even in winter!

6. Installed overcurrent fuse + thermal fuse directly at the motor winding

7. Tank deaerator

8. Solid, metal filters with effective HEPA cartridges!

9. Reinforced connecting rods with cast iron counterweight to reduce vibration levels

10. Cast iron cylinders with honed sleeves - perfect oil film distribution

• suction capacity max: 540 L-min
• max working capacity: 390 L/min
• working pressure: 10 Bar
• pressure max: 12 Bar
• tank: 50 L
• Rated power (on motor shaft): 2,2 kw
• max engine power consumption: 3,5 kw (3500 watt)
• number of working sockets: 3
• oil pan capacity: approx. 0,4 Liter
• power supply: 230v
• Frequency: 50 / 60 Hz
• Volume: 97 dB
• Weight: approx. 45 kg
• Piston system: V
• Number of pistons: 2
• Piston diameter: 48 mm
• pressure reducer: YES
• Dehydrator: YES
• overload protection: YES
• built-in starting relaxer: YES
• induction motor: YES
• certificates: YES
• Declaration of conformity: YES
• built-in safety valve !
• oil used: compressor LD-100
• 1 replacement after 5 hours, then every 50 hours
• lubrication: splash
• Cylinders: cast iron
• correct oil level: covered 3/4 slide
• Check the oil level before each start. If necessary, supplement its condition.

• 0,4 L oil ( 2 x 0,2L or 1 x 0,4L)
• 2 running wheels with rubberized raceway
• 2 anti-vibration feet
• 1/2'' quick-connector for cylinder mounting
• integrated dehydrator with reducer and 2 fittings
• 2 metal filters with HEPA cartridges
• crankcase vent with ball valve
• Mounting screws
• spiral hose 20m (5 x 8 mm)

Watch the presentation of this compressor model on YouTube.

Link to copy:

https://youtu.be/H_yqhjucx1U?si=r-G03VP3slYHHakF

• 2 pistons 48mm
• 3 rings
• cast iron cylinders
• steel valve plates
• Quiet operation
• increased piston stroke o compared to the previous model
• clear oil level indicator
• large vent with ball valve.

• overload protection
• enhanced start - 2 capacitors !
• enlarged cooling turbine
• induction motor - brushless
• Large, 8 blade fan resulting in an even more efficient cooling system
• Compressor mounted on 2 full mounting feet
• Efficient induction motor with overload fuse with max power consumption 3500 watt

• better heat flow (heat dissipation) from the piston to the cylinder, which has an even better effect on the life of the compressor
• Sealing, i.e. preventing oil from entering the oil chamber into the cylinder!!

• silence the compressor operation
• do not throttling the air flow
• do not melt for longer work
• increased resistance to mechanical damage
• super filtering HEPA cartridges!

ONLY WITH US!! AN ESSENTIAL ELEMENT IN PAINTING WORKS!

Each compressor in the set has a separator with a dehydrator.

This element captures all impurities from the exhaust air (water, oil, solids).

It has a capacious reservoir and a manual valve for condensate-pollution drain.

• Thanks to this solution, you have access to a large and immediate amount of air, unlimited switch or filter.
• It is ideal for blowing, pumping truck tires, or powering large pneumatic wrenches

Please pay attention to the cylinder finishes, the quality of welds at the highest level, which are made by state-of-the-art welding machines. Bottle made of thick sheet metal.

Specifications