Oro kompresorius 50 l, stūmoklinis, 12 bar, BIZON POLSKA

Trumpai apie prekę

Prekė: Oro kompresorius 50 l, stūmoklinis, 12 bar, BIZON POLSKA. Kategorija: Kompresoriai.

• Gamintojas: Bizon Polska
• Modelis: BM25-50G Bizon Polska
• Galia: 2.5 kW
• Įtampa: 230 V

• enlarged suction chambers - increased capacity up to 200L/min
• vertical dehydrator with two outputs + REDUCER
• powder coated cylinder with anti-corrosion protection
• steel valve plates
• high engine power
• cylinder capacity 50L (real 50l )
• induction motor type (brushlessy)
• direct compressor drive (beltless)
• cast iron cylinder
• integrated reducer pressure
• oil lubrication of the compressor
• 2 pressure gauges (direct and reducing)
• Quick connector 1/2'' mounted directly into the cylinder!
• practical pressure hose holder

Original oil compressor. The compressor is single-phase, air-cooled and oil-lubricated. Designed for painting, pumping, sandblasting, blowing and for all kinds of work with other pneumatic devices.

The air pump pumps air into a 12 Bar pressure cylinder. The switch (recessor) disconnects the pump when filling a tank of 10 Bar. Thanks to the use of a pump with 20% stock, the unit is not strained, which significantly translates into its service life!

Equipped with two readable pressure gauges showing pressure.

The enlarged diameter of the turbine affects the high efficiency of air flow, in addition, it prevents the blockage of impurities.

In addition, it is equipped with wheels for easy and trouble-free movement.

The compressor additionally has a capable vertical separator with a reducer - it retains water and oil in the blown air.

ONE OF THE BEST COMPRESSORS ON THE MARKET IN ITS CLASS

• The compressor is equipped with a iron cylinder with an enlarged ribbed piston diameter of 48mm (significantly better heat dissipation, an important technical aspect if the compressor is to be used in demanding and long-lasting activities)
• increased suction chambers - result in increased suction efficiency (200L-min)
• increased compressor compression rate to 10bar!!

• better heat flow (heat dissipation) from the piston to the cylinder, which has an even better effect on the life of the compressor
• Sealing, i.e.

• Large, 10-blade fan resulting in an even more efficient cooling system
• Efficient induction motor with overload fuse with max power consumption 2500 watt
• Additional second output for possible installation of another quick-connector with thread 1/2"

AN ESSENTIAL ELEMENT IN PAINTING WORKS!

Wiking Poland compressors have always been characterized by attention to detail and practical use of high compressor efficiency, which results in:

VERTICAL REDUCER WITH DEHYDRATOR

This fact makes the offered model unique in its class!

This element captures all impurities from the exhaust air (water, oil, solids).

It has a capacious vertical reservoir and a manual valve for condensate-pollution drain.

• Thanks to this solution, you have access to a large and immediate amount of air, unlimited switch or filter.
• It is ideal for blowing, pumping truck tires, or powering large pneumatic wrenches

Grey cast iron is characterized by high abrasion resistance with good damping properties. The cylinders are honed for the purpose of honing is to clean the finish in order to obtain the appropriate surface, which causes the surface of the finish to "spray" so that the oil film can stick to it - micro-scratches must be at the right angle to each other to keep the oil on the surface

• 2 pressure gauges
• dehydrator with separator!
• valve for contaminant drain
• pressure reducer
• safety valve
• splitter
• relaxer

• suction efficiency: 200 L-min
• max working capacity 160 L-min
• max pressure: 10 bar
• max engine power consumption: 2500 watt
• Hopper capacity: 50 Liters
• Rated power (on motor shaft): 1,8 kw
• 230v/50Hz power supply
• Volume: 97 dB
• Weight: approx. 30 kg
• Number of pistons: 1 x 48mm
• pressure reducer: YES
• Dehydrator: YES
• overload protection: YES
• induction motor: YES
• certificates: YES
• Declaration of conformity: YES
• built-in safety valve !
• oil used: compressor LD-100
• 1 replacement after 5 hours, then every 50 hours
• lubrication: splash
• Cylinders: cast iron
• correct oil level: covered 3/4 slide
• Check the oil level before each start. If necessary, supplement its condition.

• LD-100 Compressor Oil
• Separator with Dryer
• 1x Metal Filter with HEPA Cartridge
• 4 Mounting Screws
• Bleeder Valve
• 2 x Anti-Vibration Feet
• 2 Solid, Rubberized Wheels
• User Manual (PL)
• Declaration of Conformity
• Air Compressor

Compressor equipped with a practical hose holder

Compressor equipped with a practical hose holder

Safety valve

Compressor equipped with metal filters with hepa cartridge

Thermal protection

• POLISH BRAND
• We have been operating on the market since 2005
• WE HAVE RICH EXPERIENCE IN PNEUMATIC INDUSTRY, THOUSANDS OF SATISFIED CUSTOMERS
• CERTIFIED PRODUCT WITH UNINFLATED PARAMETERS
• CERTAINTY OF PROFESSIONAL ADVICE ON PURCHASE AND SERVICE
• WE HAVE OUR OWN SERVICE (AVAILABILITY OF ALL PARTS TO OUR PRODUCTS DURING WARRANTY AND POST-WARRANTY TIME)

Specifications