Oro kompresorius Blacksmith 500 l, 14 bar, K18, 400 V, alyvinis

Trumpai apie prekę

Prekė: Oro kompresorius Blacksmith 500 l, 14 bar, K18, 400 V, alyvinis. Kategorija: Kompresoriai.

• Gamintojas: Kowal Polska
• Modelis: k18
• Galia: 7.5 kW
• Įtampa: 400 V

• + oils + filters + dehydrator + wheels !

Oil compressors from blacksmith are ideal devices for professionals, but they will also be used in the garage of every DIYer who values high quality at competitive prices. These devices are manufactured on the basis of many years of experience and are appreciated in many markets. A product for professionals that will perfectly "find" in any garage, home workshop, farm. It is ideal for most pneumatic devices - for pumping, cleaning, blowing, painting.

Our compressors are already passing the test on several hundred vulcanizations!

• New, improved design!
• 4-piston compressor with suction-pressing-beating pistons
• pump with enlarged ribbed (better heat dissipation)
• enlarged valve seats for faster airflow
• increased to 6 working sockets
• Raised head heat sink
• increased compression ratio max 14 BAR
• enlarged diameter of the cooling turbine
• oil lubrication, splash lubrication
• stable transport handle welded in two places
• 3 ring pistons

• height: approx. 140 cm
• length: approx. 180 cm
• Width: approx. 62 cm

• Our compressor has a cylinder with approval with a real capacity of 500 Liters !
• tank dimensions: 60 cm x 176 cm
• If you run a company under the supervision of a labour inspectorate, know that we add all documents to each compressor to be reported in UDT

500L oil compressor from the renowned company KowaL Polska. It is high power 7500 watt will work perfectly in any workshop. It can drive various kinds of pneumatic tools, be used for spray painting, sandblasting, wheel pumping and find other applications.

Equipped with two readable pressure gauges showing pressure.

This model dissipates heat very well and is characterized by low energy consumption while maintaining high performance parameters.

The enlarged diameter of the turbine affects the high efficiency of air flow, in addition, it prevents the blockage of impurities.

In addition, it is equipped with wheels for easy and trouble-free movement.

Thanks to the application of the 4-piston motor, the device is adapted to intensive work.

The compressor additionally has a SEPARATOR - it retains water and oil in the blown air.

ONE OF THE BEST COMPRESSORS ON THE MARKET IN ITS CLASS

• max suction capacity: 1960 L-min
• max working capacity: 1460 L-min
• pump type: slow-rotating
• compressor speed min: 750 r-min
• compressor speed max: 1050 r-min
• Oil bowl capacity: approx. 4 Liters
• max pressure: 14 bar
• Operating pressure: 12,5 bar
• Engine power: 7500 watt (7,5 kw )
• tank: 500L
• bottle color - black
• Number of working sockets: 6
• 400v/50Hz power supply
• weight with packaging: approx. 370 kg
• Piston system: V
• Number of pistons: 4
• diameter of ring pistons 2 x 105mm + 2 x 55mm
• pressure reducer: YES
• Dehydrator: YES
• built-in starter relaxer: YES
• induction motor: YES
• certificates: YES
• Declaration of conformity: YES
• built-in safety valve !
• oil used: compressor LD-100
• Power Cable: No
• 1 replacement after 5 hours, then every 50 hours
• lubrication: splash
• Cylinders: cast iron
• correct oil level: covered 3/4 slide
• Check the oil level before each start. If necessary, supplement its condition.

• 4 rubberized wheels
• hose 10m
• built-in dehydrator with reducer
• 2 x metal air filter with hepa cartridge
• instruction PL
• 1 vent
• Direct quick coupler for cylinder mounting
• 1 infusion stopper
• 3 Liters of oil Ld-100 (in bottles or poured into a compressor)

- Increased engine power

- Copper motor winding

- Iron cylinders

- Large cooling turbine - quieter compressor operation

- Separator with reducer

The fact of installing an air pump with suction and punching pistons in the compressor allows for high air compression, which makes it ideal for activities that have been out of reach for other compressors so far. Sandblasting, blowing and pumping wheels in truck wheels - the effectiveness of these activities will increase incomparably compared to ordinary compressors. In addition, the offered pump has:

• max. compression ratio 14 bar
• working pressure 12,5 bar
• iron cylinders with duraluminium tricyclic pistons
• large pulley acting as an efficient compressor fan
• steel valve plates
• increased suction chambers
• enlarged head heat sinks

In addition, it is worth noting that the motor with the pump is connected by a belt transmission. This is a low-speed compressor. This significantly increases the service life of the entire unit while maintaining high pump efficiency.

ONLY WITH US!! AN ESSENTIAL ELEMENT IN PAINTING WORKS!

Each compressor in the set has a separator with a dehydrator.

This element captures all impurities from the exhaust air (water, oil, solids).

It has a capacious reservoir and a manual valve for condensate-pollution drain.

New, aesthetic colors! Black mat cylinder!

• Thanks to this solution, you have access to a large and immediate amount of air, unlimited switch or filter.
• It is ideal for blowing, pumping truck tires, or powering large pneumatic wrenches
• the ideal solution for powering the most demanding pneumatic wrenches. Large unlimited airflow 10 atmospheres!!

Taking into account the weight and size of the compressor, KowaL Polska used a comfortable and most importantly solid transport handle!

• welded in two places (up/down) at the cylinder tube. Unlike other brands where the handle is welded only from the top at the cylinder
• Perfectly centered and balanced handle
• handle made of high carbon steel
• does not tremble or make noise during operation
• No need to constantly tighten the screws!
• does not limit access to the switch and quick-connector
• is guided high and manoeuvring does not require excessive bending of the operator!
• and most importantly, it does not protrude behind the front outline of the cylinder, so it does not increase the volume of the entire compressor

• Hose diameter: 8 x 12 mm
• length 10 m
• made of PVC + silicone
• Internal reinforcement: YES
• 2 cuffed quick-connectors

• BRAND blacksmith - 10 YEARS OF EXPERIENCE IN THE PNEUMATICS INDUSTRY, THOUSANDS OF SATISFIED CUSTOMERS
• CERTIFIED PRODUCT WITH UNINFLATED PARAMETERS
• CERTAINTY OF PROFESSIONAL ADVICE ON PURCHASE AND SERVICE
• WE HAVE OUR OWN SERVICE (AVAILABILITY OF ALL PARTS TO OUR PRODUCTS DURING WARRANTY AND POST-WARRANTY TIME)
• ONLY WITH US THIS CLASS PRODUCT AT SUCH A LOW PRICE WHICH WILL BE USED IN ALL CONDITIONS IN WHICH IT WILL WORK!

Specifications