Oro kompresorius BLACKSMITH ZBV, 100 l, 12 bar, stūmoklinis, tepalinis

Trumpai apie prekę

Prekė: Oro kompresorius BLACKSMITH ZBV, 100 l, 12 bar, stūmoklinis, tepalinis. Kategorija: Kompresoriai.

• Gamintojas: Kowal Polska
• Modelis: SBN 12 BAR +c20
• Galia: 3 kW
• Įtampa: 230 V

• + oil + filters + dehydrator + reducer + spiral hose 20m

• Already on sale -New, best 7th generation KowaL
• enlarged valve seats for faster airflow
• Raised head heat sink
• When turned on, the compressor fills the cylinder up to 10 BAR!
• enlarged diameter of the cooling turbine
• oil lubrication, spray lubrication
• 2 x 48 mm diameter three-ring pistons

• Height: approx. 80 cm
• length: approx. 90 cm
• Width: approx. 48 cm

The company KowaL Polska, with this model, was one of the first to introduce the FORGED CONNECTING RODS system. Thanks to this solution, even after many years of use, there is no oval on connecting the piston with the pin!

• Our compressor has a cylinder with approval with a real capacity of 100 Liters !
• tank dimensions : diameter 40 cm x length 80 cm
• If you run a company under the supervision of a labour inspectorate, know that we add all documents to each compressor to be reported in UDT

The KowaL model looks great compared to the competition. His cylinder punching times of 100L and capacity up to a given pressure are:

1. from 0 to 1 bar = 15,5 s 390 L/min
2. 0 to 2 bar = 31 s 387 L/min
3. 0 to 3 bar = 47 s 383 L/min
4. from 0 to 4 bar = 1 min 7 s 358 L/min
5. from 0 to 5 bar = 1 min 30 s 333 L/min
6. from 0 to 6 bar = 1 min 56 s 310 L/min
7. from 0 to 7 bar = 2 min 22 s 296 L/min
8. from 0 to 8 bar = 2 min 57 s 271 L/min
9. from 0 to 9 bar = 3 min 28 s 260 L/min
10. from 0 to 10 bar = 4 min 250 L/min

1. Pistons made of duralumin. 3 rings on pistons. Piston diameter up to 48 mm!

2. Pump base on two full and solid mounting paws

3. Two starting relaxers (final and starting)

4. Vent (odma) with ball valve inside

5. THE BEST ENGINE. Two starting capacitors (120uF) plugged into the motor in parallel (not in series). ! KowaL starts even in winter!

6. Mounted Overcurrent Fuse + Thermal Fuse Directly at Motor Winding

7. Tank dehydrator

8. Robust metal filters with effective HEPA cartridges!

9. Reinforced connecting rods with cast iron counterweight for reduced vibration

10. Cast iron cylinders with honing sleeve - perfect distribution of oil film

• suction capacity max: 540 L-min
• max working capacity: 390 L/min
• pressure max: 12 Bar
• working pressure: 10 Bar
• tank: 100 L
• Rated power (on motor shaft): 2,2 kw
• max motor power consumption: 3 kw (3000 watt)
• number of working sockets: 3
• oil pan capacity: approx. 0,4 Liter
• power supply: 230v
• Frequency: 50 / 60 Hz
• Volume: 97 dB
• Weight: approx. 55 kg
• Piston system: V
• Number of pistons: 2
• Piston diameter: 48 mm
• pressure reducer: YES
• Dehydrator: YES
• overload protection: YES
• built-in starting relaxer: YES
• induction motor: YES
• certificates: YES
• Declaration of conformity: YES
• built-in safety valve !
• oil used: compressor LD-100
• 1 replacement after 5 hours, then every 50 hours
• lubrication: splash
• Cylinders: cast iron
• correct oil level: covered 3/4 slide
• Check the oil level before each start. If necessary, supplement its condition.

• 0,4 L oil ( 2 x 0,2L or 1 x 0,4L)
• spiral hose 20m with tips
• 2 running wheels with rubberized raceway
• 2 anti-vibration feet
• 1/2'' quick-connector for cylinder mounting
• integrated dehydrator with reducer and 2 fittings
• 2 metal filters with HEPA cartridges
• Mounting screws

• overload protection
• enhanced start - 2 capacitors !
• enlarged cooling turbine
• induction motor - brushless
• Large, 8 blade fan resulting in an even more efficient cooling system
• Compressor mounted on 2 full mounting feet
• Efficient induction motor with overload fuse with max power consumption 3000 watt

• better heat flow (heat dissipation) from the piston to the cylinder, which has an even better effect on the life of the compressor
• Sealing, i.e. preventing oil from entering the oil chamber into the cylinder!!

• 2 pistons 48mm
• 3 rings
• cast iron cylinders
• steel valve plates
• Quiet operation
• increased piston stroke o compared to the previous model
• clear oil level indicator
• large vent with ball valve.

• silence the compressor operation
• do not throttling the air flow
• do not melt for longer work
• increased resistance to mechanical damage
• super filtering HEPA cartridges!

ONLY WITH US!! AN ESSENTIAL ELEMENT IN PAINTING WORKS!

Each compressor in the set has a separator with a dehydrator.

This element captures all impurities from the exhaust air (water, oil, solids).

It has a capacious reservoir and a manual valve for condensate-pollution drain.

• Thanks to this solution, you have access to a large and immediate amount of air, unlimited switch or filter.
• It is ideal for blowing, pumping truck tires, or powering large pneumatic wrenches

Please pay attention to the cylinder finishes, the quality of welds at the highest level, which are made by state-of-the-art welding machines. Bottle made of thick sheet metal 2,75mm (Ea=2,25mm + 0,5mm corrosion allowance) After production, each cylinder is pressure tested at 15,8 Bar.

Specifications