Oro kompresorius STRONG, 150 l, 3 cilindrų, 230 V, su separatoriumi

Trumpai apie prekę

Prekė: Oro kompresorius STRONG, 150 l, 3 cilindrų, 230 V, su separatoriumi. Kategorija: Kompresoriai.

• Gamintojas: Tagred
• Modelis: TA325B
• Galia: 4.1 kW
• Įtampa: 230 V

New! The compressor is equipped with a hose retractor! Only on this action to the set we give a professional crimped pneumatic hose 10m free!

Includes FREE 1 bottle of specialized compressor oil TAGRED 1 L + ball valve + conical connector + brass quick-connector directly screwed into the cylinder !

As a few, we use piston rods made of cast iron with an admixture of duralumin in our pumps, so that our compressors can work for a long time in extreme unfavorable conditions, i.e. Frost and very high temperatures are not able to destroy our devices, an additional advantage is the fact that the pumping set mounted on the cylinder is low-speed, which also affects relatively quiet operation.

We use plastic air housings, because we know from experience that the compressor during operation produces certain vibrations that simply cause these filters to unscrew, which is very dangerous for pumps when they draw polluted air and we can afford it thanks to a solution that does not allow pumps to heat excessively even at a pressure of 10bar

This is a more expensive solution, but thanks to this, the issue of any defect has been minimized to practically zero.

We believe that our devices are a perfect example of a quality-price solution.

We guarantee that while maintaining the highest standards and norms, Tagred compressors will meet your expectations.

Certified product. Has a declaration of conformity and the necessary directives, which proves the quality of the product!!!

The polish compressors by Tagred are technologically advanced devices that are made of high quality materials. Other valuable advantages of our compressors are: low operating costs multitasking, precision and work culture. The low weight of the compressor makes it very ergonomic, it also has an automatic lubrication system, air filtration, pressure reducer and transport wheels.

As the only company on the Polish market, we offer compressors with a modern spacing of head mounting screws.

The new X-type screw spacing technology allows the compressor to operate without damaging the seals. In addition, there are reinforced head pins (hardness 10,9).

The competition has on sale compressors with head attachment for 4 screws in such cases after heating the head, the gasket blows out.

Composition of the set

• Oil compressor TA325B
• Safety switch
• 2 quick couplers
• Pressure cable 10 M with quick couplers, crimped
• Brass quick coupler directly screwed into the cylinder
• Air filters
• Compressor oil in a cylinder - FREE!!! 1x1L
• One pressure gauge showing pressure.
• Drain valve of accumulated water in the tank.
• Two outputs directly from the tank
• Four very large rubber wheels.
• Full UDT documentation(sent upon customer request)
• User manual in Polish

Technical data

Compressor

• Model: TA325B
• Number of pistons – 3
• Tank – 150 liters
• Supply voltage – 230V / 50 Hz
• Maximum tank pressure - 10 BAR
• Pump operating pressure - 8 BAR
• Maximum engine power – 4,1 kW – 5,6 hp
• Nominal engine power - 3 kW – 4,1 hp
• For proper and safe operation of the device, it is required to use protection in the switchgear: overcurrent switch min.C20A
• Effective suction capacity: 650L
• Test performance real, effective on the blowout - 420l/min.
• Test real performance, effective on the blowout on the finish - 425l/min.
• Engine speed – 2840 rpm
• Pump speed – slow-rotating type 1440 rpm
• Sound Pressure Level - 72,4 dB (A)
• Sound power level - 87 dB (A)

Snake

• Model: TA108
• Connection threads: standard quick couplers
• Operating pressure: 20 bar
• Breaking pressure: 55 bar
• Material: rubber
• Operating temperature: +70 degreesC / -40 degreesC
• Length: 15 m
• Inner diameter: 10 mm
• Outside Diameter: 17mm

• This solution gives access to a large and immediate amount of air, unlimited switch or filter,
• ideally suited for blowing, pumping truck tires, or powering large pneumatic wrenches

Specifications