Panardinamasis vandens siurblys šuliniui, 550W

Trumpai apie prekę

Prekė: Panardinamasis vandens siurblys šuliniui, 550W. Kategorija: Siurbliai ir hidroforai.

• Gamintojas: Verke
• Modelis: GŁĘBINÓWKA V60051 1''

Efficient screw submersible pump VERKE V60051 designed for pumping clean and cold water from wells. Thanks to the power of 550 W, the capacity of 1800 l/h and the lifting height of up to 50 m, this model will work both in households and during work related to irrigation of farms.

The pump has been adapted to work in wells with a minimum hole diameter of 110 mm. Screw construction and connector with a diameter of 1" allow the device to be used as part of the installation used for collecting and pumping water. The standard 230 V / 50 Hz power supply allows the pump to be used in a typical electrical system.

Model V60051 is designed for pumping water containing not more than 150 g/m³ grinding solids, and the temperature of the pumped medium can be up to +40°C. It is a practical solution for users looking for a submersible pump for regular use on the farm or during irrigation.

► Power supply voltage: 230 V / 50 Hz

► Power: 550 W

► Performance: 1800 l/h

► Lifting height: 50 m

► Minimum diameter of source opening: 110 mm

► Diameter of the stub: 1"

► Pump type: screw, deep-sea

► Purpose: clean and cold water

► Maximum medium temperature: +40°C

► Admissible content of grinding solids: max. 150 g/m³

► Power 550 W

The pump is equipped with a engine with a power of 550 W, ensuring appropriate parameters during water pumping. The design is designed to work with clean and cold water.

► Capacity 1800 l/h

The capacity of 1800 litres per hour allows for efficient pumping of water from the well into the installation. This parameter will work both during the current water intake and during irrigation.

► Lifting height 50 m

The pump offers a lift height of up to 50 meters, so it can be used in installations requiring water pumping to a significant height.

► Screw construction

The V60051 uses a screw construction, designed to work in wells with a minimum hole diameter of 110 mm.

► Universal application

The pump can be used for water supply of farms and for irrigation work. Its parameters allow for wide use in water installations.

► For clean and cold water

The device is designed for pumping clean and cold water, containing not more than 150 g/m³ grinding solids. The maximum temperature of the pumped medium is +40°C.

► Connection 1"

The pump has a connector with a diameter of 1 inch, which allows you to use a properly selected discharge pipe and easily adjust the device to the installation.

► Power supply 230 V

The standard 230 V / 50 Hz power supply means that the pump can work with a typical electrical system.

► Household

The pump can be used for water collection and pumping from well, being part of the installation used to supply the farm with water.

► Irrigation

Thanks to the capacity of 1800 l/h, the device can be used for work related to irrigation of agricultural areas and other installations using water from wells.

► Wells of appropriate diameter

The pump is designed for sources with a minimum hole diameter of 110 mm, so before installation, make sure that the well provides adequate space for the device.

The heart of the device is an electric motor with a power of 550 W, which ensures appropriate operating parameters during water pumping. This is the power selected for the pump design, enabling achieving a capacity of 1800 l/h and a lifting height of up to 50 meters.

The pump reaches efficiency up to 1800 l/h, so it can efficiently pump water from the well to the installation. This parameter allows you to use the device both for current water intake and for work related to irrigation of farms.

The maximum lift height is 50 meters, which is one of the key advantages of this model. Thanks to this, the pump can be used in installations where water must be pumped from the well to significant heights. This parameter should be taken into account when designing the installation and selecting other elements of the system.

The pump has a 1" diameter connector, which determines the size of the connection on the discharge side. This allows you to choose the right cable and elements of installations cooperating with the pump. Before installation, adjust the accessories to the dimension 1 inch and the parameters of the entire installation.

The pump has been adapted to pump medium with a maximum temperature of +40°C. Thanks to this, it can be used in installations where the temperature of the pumped water is within the range specified by the manufacturer. This is an important parameter when planning the use of the device and allows you to correctly select the pump for the conditions prevailing in a specific installation.

The pump can work with water containing up to 150 g/m³ grinding solids. This parameter determines the permissible level of such impurities in the pumped medium and allows you to properly select the device for the conditions prevailing in the well. This makes it easier for the user to assess whether VERKE V60051 will be suitable for a specific water source.

The pump is designed for installation in water sources where the hole diameter is at least 110 mm. This allows you to precisely determine the requirements for the installation site even before the purchase and installation of the device. It is worth checking the diameter of the well to provide the pump with adequate space for proper placement and operation.

The pump uses a standard power supply of 230 V / 50 Hz, so that its electrical parameters are adapted to a typical electrical system. This solution facilitates the use of the device in the household and in installations used for collecting and pumping water from wells.

The deep design allows the device to be placed directly in a well or other suitable water source. This solution allows you to draw water from deeper places and pump it into the installation using a cable connected to the strand 1". The VERKE V60051 is therefore designed for installations where it is necessary to effectively draw water below ground level.

VERKE V60051 has been designed as a device for taking and pumping water from wells, thanks to which it can be a practical element of the water system. The combination of a submersible design, power of 550 W, capacity of 1800 l/h and lifting height up to 50 m allows the pump to be used in installations designed for regular water transport.

Specifications