Parkavimo jutiklių modulis su kablio balkiu, pagaminta Lenkijoje

Trumpai apie prekę

Prekė: Parkavimo jutiklių modulis su kablio balkiu, pagaminta Lenkijoje. Kategorija: Laidai ir lizdai.

• Gamintojas: Auto-hak

Recommended for cars with an on-board computer.

Required if the car has a light failure indicator or rear lamps in LED technology.

The electronic hook module is the basic trailer lighting controller that ensures the "repeat" of active lights on the rear of the car on the trailer lighting.

SPECIFICATION:

• Works with CAN-Bus installation
• Works with parking sensors
• Works with LED and single fiber lighting (PWM)
• For connecting 7-PIN socket
• Detection of trailer connection;
• Approval E20

7-PIN MODULE FUNCTIONS:

• fog lamps - YES
• reversing lamps - NO
• brake lights STOP - YES
• position lamps - YES
• direction indicators - YES
• trailer module - YES
• Disconnection of parking sensors: YES
• LED light support - YES
• Single-fiber bulb (PWM) support - YES
• CAN-Bus - YES
• control of the operation of the trailer lights - NO
• approval - YES

The 7-PIN electronic hook module is designed to connect the electrical system of the towing hook in cars where computer lighting control systems are used and in cars with a lighting failure indicator or equipped with LED bulbs. In such cars, direct connection to the rear lamps of the 7-pin trailer socket may result in damage to the on-board computer. The use of the electronic 7-PIN module does not constitute additional loads for the installation of the car, because each module input is characterized by a very low current consumption of 1mA. Each module output is protected against possible short circuits from the side of the trailer electrical system.

Our electronic modules of the towbar are adapted to incandescent and LED lighting of the car and what's more, they work correctly with the control of "PWM" lighting in the car (i.e. when one cable is signaling for two lights, e.g. "stop" and "position").

The module disconnects the parking sensors!

Set Contents:

• electronic module - 12V control panel
• 7-PIN socket
• full wiring with fuse
• accessories needed for assembly
• connection diagram in Polish
• gasket under the socket

Specifications