Peilių galąstuvas Kazak M5

Trumpai apie prekę

Prekė: Peilių galąstuvas Kazak M5. Kategorija: Įrankių galąstuvai.

• Gamintojas: Kazak Poland
• Modelis: kazak

Kazak M5 sharpening system

The tool is designed to sharpen knives of various shapes and sizes. It ensures secure placement of the blade in the clamps and its rotation without the need for disassembly, which translates into high accuracy and maintaining a constant sharpening angle.

The Kazak M5 is designed for both those starting to work with sharpening and more experienced users. Carefully developed construction helps maintain full control over the process and promotes an even cutting edge without the need for professional skills.

Stable steel working base

The working base is made of 8 mm thick steel. The material is responsible for the high rigidity of the entire structure when driving the whetstone on the edge. The whole is covered with a durable black powder coating, which protects the steel against corrosion and damage caused during regular use.

On the bottom there are rubber inserts that increase adhesion to the countertop and limit the movement of the device during sharpening. The sturdy base helps maintain repeatability of movements and better control the whetstone pressure.

Vertical mast with increased rigidity, guide, sliding knot

The vertical mast is made of structural steel with a diameter of 10 mm. The larger cross-section increases the rigidity of the entire system and reduces the susceptibility to deflection during the operation of the guide. A protective coating is used on the mast, which protects its surface and supports the smooth operation of the regulatory elements. The guide trolley can be moved along the column, so you can adjust the working height to the width and geometry of the blade.

The guide is also made of structural steel and covered with a protective layer, and its length together with the handle is 450 mm. The sliding knot was made of polyacetal plastic. This raw material is distinguished by low coefficient of friction, wear resistance and dimensional stability.

solid Crab Clamps

Crab clamps are responsible for fixing the knife. Their construction allows stable immobilization of both short and longer blades. The clamps were created in the milling process of solid aviation aluminum 7075, which is valued for its high mechanical strength and low weight.

The clamping elements are designed to maintain flexibility when opening, and when fixed, the blades provide adequate rigidity. After embedding, the knife remains stationary while moving the whetstone. This reduces the risk of changing the set angle and helps to achieve a repeatable effect along the entire length of the cutting edge.

The system has been adapted to sharpen knives with:

maximum blade length 200 mm

maximum blade thickness 5 mm

sharpening angle adjustment, double row ball bearing

Setting the sharpening angle is done by changing the position of the trolley on the vertical mast. This solution allows you to choose parameters for the type of knife, blade thickness and the expected profile of the cutting edge. For a knife with a width of 25 mm, the angle range on one side is from a minimum of 11 degrees to a maximum of 25 degrees. This adjustment allows you to work with both more delicate kitchen knives and models that require a more durable usable edge.

The system received a rotary mechanism using a double-row ball bearing. It allows you to flip the knife to the other side without removing the blade from the clamps. This solution reduces the risk of moving the knife between the stages of sharpening. It also helps to maintain symmetry, as the blade remains embedded in an identical layout.

Electronic protractor and diamond donkeys included

The set includes an electronic protractor with batteries. It allows you to control the set sharpening angle and makes it easy to adjust the parameters to a specific blade. Thanks to electronic measurement, the user does not have to rely solely on visual assessment. This is particularly important when sharpening several knives with similar geometry and when recreating a predetermined edge profile.

The set also includes 2 diamond whetstones:

grit 240

grit 600

The donkey with a gradation of 240 is designed for more intensive material collection, edge correction and work with a significantly blunted blade. Gradation 600 allows you to move on to a more subtle finish and smoothing edge after an earlier stage.

Ergonomics and control of work

The construction of the system allows the whetstone to be conducted in a precise and repeatable manner. Secure blade attachment, the ability to adjust the angle and smooth operation of the guide reduce accidental deviations occurring during sharpening.

The removable frame allows you to control the cutting edge while working. It makes it easier to observe progress, check the uniformity of whetstone contact with the blade and faster detection of possible irregularities.

The system components are designed to reduce slack and maintain smooth operation. The sliding node is distinguished by increased smoothness of work and durability estimated at up to 10 000 sharpening cycles.

elements of the set

Kazak M5 sharpening system

electronic protractor with batteries

diamond whetstone grit 240

diamond whetstone grit 600

Allen key

the most important features

Precise adjustment of sharpening angle

stable aluminium Crab clamps

Rotating the knife without removing

double row ball bearing

8 mm thick steel base

vertical mast with a diameter of 10 mm

rubber non-slip inserts

electronic protractor included

Diamond whetstones grit 240 and 600

Removable frame for blade control

guide with a length of 450 mm

Polyacetal slip node

smooth operation

Specifications