Tērauda skava 10 kg, 34 cm, ar kalšanas ragu

Trumpai apie prekę

Prekė: Plieno priekalas 10 kg, 34 cm, su kalimo ragu. Kategorija: Spaustuvai.

• Gamintojas: Sevico
• Modelis: F425

Practical anvil weighing 10 kg, designed for processing metal elements in the workshop, garage or workshop.

The classic design combines a flat work surface, a profiled corner and two working holes, making the anvil suitable for many metal shaping, straightening and fitting jobs.

The compact dimensions make it easy to place on a workbench or stable wooden block.

✅ What is it for?

The anvil provides stable support during manual processing of metal elements.

You can use them, among other things, to:

• forging and shaping metal,
• straightening of bent elements,
• making bends and arches,
• riveting,
• piercing elements,
• flattening and leveling of surfaces,
• matching parts during repairs,
• small locksmith and workshop work.

It will work well in the processing of rods, flat bars, sheets and other small metal elements.

📐 Flat working surface 22,8 × 9 cm

The upper part of the anvil provides a working surface measuring approximately 22,8 × 9 cm.

The flat surface allows you to comfortably rest the workpiece during:

• straightening,
• flattening,
• compensation,
• forging,
• shape matching.

Thanks to this, the impact force can be transferred to a stable ground instead of a table or workbench.

➰ Profiled horn for forming

The tapered corner is particularly useful when performing arches, roundings and bends.

The changing corner cross-section allows you to choose the right place for the size of the workpiece.

It can be used, among others, in the formation of:

• rods,
• flat bars,
• rim,
• handles,
• metal details with a rounded shape.

✅ Square and round opening

On the surface of the anvil there are two working holes.

🔳Square hole can be used to embed properly matched workshop tools and accessories.

⚫ Round hole can be used as a support when piercing holes or other work requiring free space under the workpiece.

Thanks to this, the anvil gives greater possibilities than models equipped only with a flat surface.

🧱 Large mass

The net weight is about 10 kg, thanks to which the anvil provides adequate support during typical manual work, while remaining relatively compact.

The base with dimensions 14,7 × 11,5 cm allows you to conveniently position the product on a properly prepared workstation.

💡 How to best use the anvil?

✅ Set them on a heavy and stable base.

For frequent use, a massive workbench or a solid wooden block will work well.

✅ Use a flat surface for straightening.

It provides the best support when leveling and flattening elements.

✅ Use a corner for arches.

By moving the element along the tapered corner, you can get different bend radii.

✅ Do not hit the edges of the anvil directly unnecessarily.

For most of the work, the central part of the work surface is intended.

✅ When working with hot metal, use appropriate pliers and thick gloves.

Heat can also be transferred to the surface of the anvil.

✅ Before intensive work, check the stability of the position.

The anvil should not move or tilt during strikes.

📏 Specification

• Type: blacksmith anvil / workshop anvil
• Nominal weight: 10 kg
• Total length: 34,3 cm
• Total width: 11,5 cm
• Height: 10 cm
• Base dimensions: 14,7 × 11,5 cm
• Dimensions of the working surface: 22,8 × 9 cm
• Horn: profiled
• Working holes: square and round

Specifications