Plytelių laikiklis su siurbtuku, 210 mm, 2x akumuliatoriai

Trumpai apie prekę

Prekė: Plytelių laikiklis su siurbtuku, 210 mm, 2x akumuliatoriai. Kategorija: Plytelių siurbtukai.

• Gamintojas: FUGERT
• Modelis: FUG-0117

FUGERT FUG-0117 - Cordless suction cup for tiles

260 kg lifting capacity. USB-C charging. More than 8 hours of operation. Two batteries included.

✔ Large suction surface ⌀210 mm – secure grip even with large format stoneware

✔ Easy-to-read LCD screen: current lifting capacity (vacuum) and battery level

✔ Automatic pumping – the grip takes care of itself

✔ 2 replaceable Li-ion 2400 mAh batteries – work without interruptions

✔ Rubberized, non-slip handle – the only one on the market

SUCTION SURFACE ⌀210 MM

Where does the suction cup lift really come from?

Simple physics: lifting capacity = suction surface × vacuum. It cannot be "described" marketingly - it is decided by the rubber that actually comes into contact with the material.

FUGERT FUG-0117 has a round suction cup with a diameter of 210 mm, which provides a large contact area with the material. This translates into better stability and a more secure grip when lifting – even with large plates, without the risk of peeling off.

USB-C CHARGING: EVEN IN THE CAR

The only right standard: USB-C

You charge the batteries with a universal USB-C cable – the same as your phone. This means that the power source is:

✔ charger from the phone

✔ powerbank — top-up during a break at the construction site

✔ USB port in the car – the battery charges when you go to work

✔ laptop, workstation, extension cable with USB

No more completing more dedicated chargers!

Charging time: approx. 2 h from zero to full.

💡 It is worth knowing: tools with a dedicated 230 V charger have one weakness – when the charger stays in the workshop, breaks down or dies, the device becomes useless until the original is purchased. With the USB-C standard, this problem does not exist: a matching cable is in almost every home or car.

TWO LI-ION BATTERIES INCLUDED

Has one unloaded? You plug in the other one and keep working

In the set you get two powerful lithium-ion batteries 2400 mAh (3,7 V). The replaceable battery system allows you to immediately continue working after one battery is discharged – this solution is ideal for intensive professional applications.

✔ longer total working time

✔ the ability to work without interruptions – one battery works, the other charges

✔ convenient and fast battery replacement

Each battery has its own display showing the charge level on a scale of 1% to 100% — you know exactly how much energy is left before you plug the battery into the device.

RUBBERIZED, NON-SLIP HANDLE – NO ONE ELSE HAS IT

The board is held by a suction cup. The suction cup is held by you

FUGERT is the only one with a fully rubberized, non-slip handle - it is not a bare, slippery material. You will feel the difference exactly when it is the hardest:

✔ sweaty hand in the heat — rubber holds where plastic begins to "float"

✔ work gloves dusted with stoneware dust – a firm grip instead of slipping on smooth plastic

✔ whole day with plates – rubber dampens pressure on the hand, the hand gets less tired and evaporates less

The handle with a length of 110 mm is contoured for a full hand grip – also in a thick glove.

MORE THAN 8 HOURS OF OPERATION ON A SINGLE CHARGE

One battery that lasts for a full day

FUGERT works at least 8 hours on a single charge — a full day on the construction site. And when the first battery goes down, the second one's in your suitcase.

You control the level of charge on the LCD screen of the suction cup in four ranges (0 – 25%, 25 – 50%, 50 – 75%, 75 – 100%) and precisely on the display of the battery itself (1 – 100%).

LCD SCREEN: FULL CONTROL, NOT JUST A CONTROL

You see exactly what holds your record

The LCD screen shows simultaneously:

✔ current vacuum level (lift) — you know how much the suction cup will actually hold at the moment

✔ battery level in 4 ranges — without guessing how much work is left

Regular control of screen indications increases work safety and prevents sudden discharge of the device.

AUTOMATIC PUMPING

Why do suction cups "let go"? Micro-leakage.

Even on a seemingly smooth tile, there are micropores and dust particles. Because of them, the vacuum always slowly drops — this is a natural physical phenomenon, not a defect. The difference is what happens next:

✔ FUGERT detects the vacuum drop itself and immediately replenishes it

✔ The system works whenever the device is turned on – without your intervention

✔ The function is invaluable for longer portability and large formats

💡 Automatic pumping activates when dropped to about 214kg

ONE-BUTTON OPERATION

Simpler operation = fewer errors

1 Hold the button — the device turns on and automatically produces the vacuum needed for the grip

2 Move element — control lifting capacity and battery on LCD

3 Press quickly 2× — pressure drops to zero, suction cup lets go (do it only after safely putting the element away)

4 Hold again — the device turns off; the vacuum produced remains maintained until it naturally drops or manually releases

💡No valves, no manual pumping, no combination. Logic you’ll learn in 30 seconds—and not forget with gloves on the scaffolding.

SAFETY: MANUAL VACUUM RELEASE

Double control over grip

In addition to releasing with the FUGERT button, it has a mechanical vacuum release language – pulling it up lets air in and immediately disconnects the suction cup from the surface. Regardless of electronics and battery status.

✔ full control even after turning off the device (vacuum is maintained)

✔ safe detachment without tugging – never tear off the suction cup with force, it destroys the rubber of any manufacturer

✔ release the grip only after putting down and stabilizing the element

FILTER - PROTECTION OF THE PUMP AGAINST DUST

Construction is dust. The pump doesn't like it.

Dust from stoneware cutting are the biggest enemies of the vacuum pump – sucked into the cylinder accelerates wear and causes leaks. That's why this suction cup works with a filter to protect the suction system.

✔ longer pump life and stable vacuum

✔ simple maintenance: wipe the rubber after work, check the edges

APPLICATIONS: FROM STONEWARE TO GLASS

For lifting, moving, positioning and precise assembly:

✔ large format stoneware — laying wall and floor coverings

✔ ceramic tiles and glaze – accurate positioning during installation

✔ glass and panes of glass — windows, shower cabins, balustrades

✔ stone slabs — marble, granite with a smooth surface

✔ furniture boards, laminated boards and countertops with a smooth surface

💡The condition of a good grip is a clean, dry, smooth and non-porous surface. More about this in the next module – honestly.

HONESTLY: WHEN THE SUCTION CUP DOES NOT WORK

We write directly because you work with heavy plates

No vacuum suction cup (even FUGERT) will provide a secure grip on the surface:

✖ soiled with dust, grease or glue residues

✖ wet or moist

✖ with unstable, loose, thin and susceptible to deformation elements

💡Before each lift, check the purity of the rubber and its edges and look at the LCD to see if the vacuum is stable.

SET IN CASE + WARRANTY

You take it out and work — all included

In a dedicated transport case you will find:

✔ FUGERT FUG-0117 cordless suction cup

✔ 2 Li-ion 2400 mAh batteries

✔ USB-C charging cable

✔ 2 additional suction system filters

✔ Polish manual with full safety and maintenance rules

✔ case protecting against dust, moisture and damage in transport

TECHNICAL DATA

Brand: FUGERT

Model: FUG-0117

Maximum lifting capacity: 260 kg

Suction cup diameter: 210 mm

Voltage: 3,7 V

Rechargeable batteries: 2 × Li-ion 2,4 Ah (2400 mAh), replaceable

Charging: USB-C

Working time: ≥ 8 h

Handle: 110 mm, rubberised, non-slip

Display: LCD: lifting capacity, battery, operating mode

Automatic pumping: yes

Manual vacuum release: yes

Suction cup dimensions: 210 × 211 × 95mm

Weight of the device: 880g

Battery weight: 100g

NICE PACKAGING = READY GIFT

You don’t have to pack anything – just a ribbon

The suction cup arrives in a practical transport case, and the whole is surrounded by a colorful cardboard wrapper with a full presentation of the product. Looks like it's off the shelf of a good tool shop.

This is a hit for a gift for:

🎁 tile or tile maker – for birthdays, name days or finishing a larger job

🎁 dad, grandfather, brother — under the Christmas tree, for Father’s Day, Boyfriend’s Day

🎁 partner or employee of the renovation team – a company gift that will really come in handy

And after unpacking, the suitcase stays for years – it protects the tool on the construction site and in the car.

FREQUENTLY ASKED QUESTIONS (Q&A)

Can I charge the suction cup in the car? Yes. All you need is a USB port in your car or a USB car charger – the suction cup charges with a standard USB-C cable (included). Full charge takes ok. 2 h.

Is one battery enough for a full day of work? Yes — the working time is more than 8 hours on a single charge. You can also recharge the device from the powerbank at any time, e.g. during the break.

What happens when the battery discharges during the transfer? The vacuum produced is maintained after turning off the device until it naturally drops or manually releases. Still, always check the battery level on the LCD before work – with a low charge, the device may not maintain the proper vacuum when pumping up.

Will the suction cup hold the plate on a rough or wet surface? No — and this applies to every vacuum suction cup. The surface must be clean, dry, smooth and non-porous. On porous, cracked or damp surfaces, an effective vacuum cannot be produced.

What is the difference between a two-replacement battery system and a built-in battery? Replaceable battery means zero downtime: when one discharges, you plug in the other and keep working, and the first charges from a powerbank or phone charger. Each battery has its own charge level display (1 to 100%).

Can I work while charging? We do not recommend using the product while charging. Charge the device before use.

How is the FUGERT handle different from the competition? It is fully rubberized and non-slip – you will find bare, hard plastic in the competition. Rubber provides a secure grip with a sweaty hand and in a dusty glove, and with all-day work, less fatigues the hand.

What materials is the suction cup suitable for? Gres (also large format), ceramic tiles, glass, stone slabs, laminated, countertops with a smooth surface, furniture elements. Do not use on objects that are unstable, loose, thin, prone to deformation or heavier than 260 kg.

How to care for a suction cup? After work, clean the rubber and edges from dust and glue residue, store in a suitcase in a dry place. Use mild means to clean. The set includes 2 filters to protect the pump - control their condition. Perform maintenance after disconnecting the battery from the device.

Is the device intended for outdoor use? According to the instructions, the device is intended for indoor use. Protect them from water, moisture and temperatures above 45°C.

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Brand	FUGERT
Parametry	Product weight with unit packaging	1.68 kg
Parametry	Manufacturer code	FUG-0117
Parametry	EAN (GTIN)	5906688630384
Parametry	Packaging status	original
Parametry	Device weight	1.15 kg
Parametry	Certificates of conformity	CE
Parametry	Batteries included	yes
Parametry	Series	Przyssawka do płytek akumulatorowa