Polimeriniai klijai baseinams, 400 g, su antgaliu, atsparūs vandeniui

Trumpai apie prekę

Prekė: Polimeriniai klijai baseinams, 400 g, su antgaliu, atsparūs vandeniui. Kategorija: Priežiūros rinkiniai.

• Gamintojas: no brand
• Modelis: Klej: Wodoszczelny, trwały, biały 400g

➡ Glue color: Grey!

Included:

• ⭐ Polymer adhesive for swimming pool PCV dry and wet - 1pcs

Polymer adhesive for dry and wet PVC pool

• ⭐ Adhesive for swimming pools made of PVC / PCV film.
• ⭐ It is better than watertight tapes and popular patches with glue.
• ⭐ Can be used on wet and dry, is 100% waterproof.
• ⭐ Easily fixes tears, cracks and hole sides and bottom of pools.
• ⭐ Perfectly suited for most pools on the market, such as BESTWAY, INTEX, etc.
• ⭐ It will save time and money, thanks to fast, aesthetic and tight adhesive.
• ⭐ Ideal even for pools with a capacity of 55 000 liters!

-----------------------------------------------------

☑ The method of use can be found on the tube itself.

Dry Bonding:

• 1 Cut the Patch:

  ⭐ Trim the Patch so that it is 3-5cm larger than the damage.

  ⭐ For small holes: a patch of about 1-2cm larger than the hole is enough.

• 2 Degrease Patch:

  ⭐ Use isopropyl alcohol or other degreasing agent to clean the adhesive surface and patch.

• 3 Prepare Surfaces:

  ⭐ Wipe with sandpaper with a gradation of 120/200 both patch and glue site to ensure better adhesive adhesion.

• 4 Apply Glue:

  ⭐ Apply glue to the linear patch and around edges.

  ⭐ Strong press to ensure good adhesion of glue and patches to the damaged surface.

Wet bonding (from the inside):

• 1 Clean Glue Place:

  ⭐ Remove any deposits from the gluing site. You can do this with a brush, rag or sponge.

  ⭐ Make sure the place is clean even if it is wet.

• 2 Prepare Surfaces:

  ⭐ Wipe both the patch and the gluing site with paper abrasive with a gradation of 120/200 to increase adhesion.

• 3 Apply glue:

  ⭐ Apply glue to the patch linearly and around edges.

  ⭐ Make sure the adhesive is evenly distributed.

• 4 Glue Patch:

  ⭐ Apply patch to wet, i.e. in water so that the damage is in the middle of the patch.

  ⭐ Strong press to ensure good adhesion of glue and patches to the damaged surface.

Application:

• ⭐ Repair of cracks on side walls of swimming pools
• ⭐ Sealing hole bottom of swimming pools
• ⭐ Gluing reinforcements in places of backrests of steps and ladders
• ⭐ Gluing additional reinforcements in places entries to swimming pools, where the manufacturer did not foresee (so that the patch, when entering, prevents abrasions)
• ⭐ Gluing additional finishing elements, such as slats and borders
• ⭐ Sealing of tiled pools in places where tiles, mortar, concrete and finishing strips meet
• ⭐ Gluing rubber anti-slip elements (for silicone rubber it is recommended to use ATK 663)
• ⭐ Accurate sealing of outflow grille connections
• ⭐ Repair of seams in the corners of swimming pools
• ⭐ Gluing non-slip crossbars made of rubber or TPU
• ⭐ Gluing decorative stones or non-slip tiles on steps
• ⭐ Sealing plugs for pumping (sometimes we can strengthen the damage on the weld several times better than the manufacturer recommends)

This glue is used in repairs of various types of pools, such as swimming pools:

• ⭐ expansion
• ⭐ rack
• ⭐ pumped
• ⭐ garden (digged into the ground)
• ⭐ made of polyester and lined with foil
• ⭐ earth lined with PVC membrane or plates
• ⭐ garden jacuzzi of inflatable or expansion type

Advantages and features

• ⭐ The adhesive is 100% waterproof, allows dry, wet and even underwater bonding
• ⭐ It is easy in use, does not require technical expertise
• ⭐ Allows to save time and money, because you do not need to empty the pool before proceeding with repair
• ⭐ After drying, the adhesive becomes flexible and stress-resistant
• ⭐ Provides a tight connection, that does not become rigid over time
• ⭐ It is resistant to atmospheric factors, including UV radiation
• ⭐ Does not contain unpleasant odors or solvents
• ⭐ Can also be used as grout for sealing

Instructions for use:

• ⭐ Make sure that the surface is always thoroughly washed, especially the elements under water, on which impurities and sediment can accumulate
• ⭐ Degrease dry elements with isopropanol
• ⭐ If the elements are wet, wipe them gently with a brush, sponge or cloth
• ⭐ Always gently wipe with 120-200 grit sandpaper (preferably both sides)
• ⭐ always apply in a linear way, and if you have a larger patch, apply it around it

Technical data:

• ⭐ Packaging: 400g (tube)
• ⭐ Colour: Grey
• ⭐ Method of application: squeegee e.g. for silicone
• ⭐ Drying time: min. 24h (depending on the thickness, it can be up to several days)
• ⭐ Thermal resistance: from -40°C to +120°C
• ⭐ Bonding: YES
• ⭐ Sealing: YES
• ⭐ Water resistance: YES
• ⭐ UV resistance: YES
• ⭐ Scent: undetectable

Included:

• ⭐ Polymer adhesive for swimming pool PCV dry and wet - 1pcs

Specifications