Pusiau automatinis suvirinimo aparatas Weldman MIG/MAG, MMA, TIG, 50–200 A, 230 V

Trumpai apie prekę

Prekė: Pusiau automatinis suvirinimo aparatas Weldman MIG/MAG, MMA, TIG, 50–200 A, 230 V. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Weldman
• Modelis: 103102
• Ilgis: 580 mm
• Plotis: 280 mm
• Aukštis: 420 mm

⚡ MISTRAL MIG 200 is an inverter semi-automatic welding machine for welding, by three methods:

• MIG/MAG - semi-automatic welding in gas shield,
• FLUX - semi-automatic welding with self-shielding wire,
• MMA - welding with wrapped electrode,
• TIG DC Lift - DC TIG welding in gas shield.

▶ MISTRAL MIG 200 was constructed using IGBT transistors, which translates into good and stable welding parameters. The device is powered from a single-phase 230V network, and most importantly allows welding current up to 200 amps for all welding methods.

▶ When designing this device, the appropriate harmony between the modern technologies used and the simplicity of execution was maintained. The result is a robust and reliable 3in1 MIG. Many users, as well as us, see here a similarity with the well-known and valued model Weldman MIDI MIG 220. However, the difference is that MISTRAL MIG 200 has been prepared factory for TIG welding.

▶ MISTRAL MIG 200 is recommended for beginners, DIY enthusiasts as well as more advanced welders. As one of the few devices in its class, it does not require the use of special TIG handles with a valve in the burner, which are connected directly to the reducer in the argon cylinder.

▶ It has a built-in solenoid valve dedicated to the TIG method. Thanks to this, it works with a standard TIG welding torch, where the source is controlled using a micro switch in the handle. After pressing the button on the TIG handle, the welding arc is initiated and the solenoid valve opens.

▶ PROFESSIONAL FEEDER - two-roll wire feeder with good driving mechanism. Smooth wire feeding ensures good and stable parameters

▶ CHANGING THE POLARITY OF WELDING - WELDING WITH SELF-SHIELDING WIRE WITHOUT GAS - has the ability to change the polarity of MIG/MAG welding. Thanks to this, it can be welded using self-shielding wire - without the need for shielding gas.

↘ TECHNICAL DATA:

• Weight: 17 kg
• TIG welding current: 10-200 A
• MMA welding current: 10-200 A
• MIG welding current: 50-200 A
• Protection class: IP21S
• Efficiency: 200A/60%, 155A/100%
• Idle Voltage: 56 V
• Wire diameter: 0,8-1,2mm

↘ ALL PARAMETERS UNDER CONTROL

• smooth regulation of welding voltage (MIG/MAG),
• smooth regulation of wire feed speed (MIG/MAG),
• MIG/MAG wire extension test,
• two digital displays of parameters: welding voltage and current - show the measured, actual value of parameters during welding,
• smooth regulation of welding current (MMA/TIG).

↘ The set includes:

• ✅2 m power cord with 230V plug
• ✅Welding torch MB 15 3 m
• ✅ TIG WP welding torch 26 4 m (DX50)
• ✅Welding cable 2 m with electrode holder 200A (DX50)
• ✅Bulk cable 2 m with clamp 300A (DX50)
• ✅Two gas connections for 8 mm technical hose
• ✅ 5-pin handle control socket and gas socket quick coupler mini type 21
• ✅230V output socket
• ✅Welding disc
• ✅Brush

Specifications