PVC baseino remonto rinkinys, klijavimas drėgnai

Trumpai apie prekę

Prekė: PVC baseino remonto rinkinys, klijavimas drėgnai. Kategorija: Priežiūros rinkiniai.

• Gamintojas: DARO Narzędzia
• Modelis: Klej Łatka Alkohol Papier Ścierny Rękawice

☑ COMPLETE SET READY TO WORK

➡ The kit contains all the basic elements needed to prepare the surface and repair the damaged PVC pool.

⭐ Hybrid polymer adhesive DN KAZUAR H49 for repairing PVC / PVC pools 400 g - 1 pc.

⭐ PVC patch for swimming pools with dimensions 50 × 27 cm - 1 pc.

⭐ Isopropyl alcohol 100 ml for degreasing glued surface - 1 pc.

⭐ Water abrasive paper with gradation P150 140x115mm for tarnishing the surface before gluing

⭐ Protective gloves for working with glue

☑ HYBRID POLYMER ADHESIVE for PVC / PVC pools

➡ GLUE DN KAZUAR H49 AQUA is used for permanent repair of pools made of PVC / PVC. It can be used dry, on wet surfaces and directly under water, so that in many cases the repair can be done without emptying the pool.

⭐ Creates a waterproof and flexible connection, resistant to the work of the pool material.

⭐ Allows repair of rtears, cracks and small holes in the walls and bottom of the pool.

⭐ Works well with the adhesive included in the set PVC / PVC patches.

⭐ It is a more durable solution than ad hoc repairs performed with waterproof tapes or cheap simple adhesive patches.

⭐ Suitable for repairing both small garden pools, as well as larger rack and expansion pools neven with a capacity of 55 thousand liters.

☑ Application of pool repair kit

➡ HYBRID POLYMER ADHESIVE with PVC / PVC patch will work well for repairing the most common damage to garden pools. The kit can be used both on a dry surface and during repairs performed without draining water from the pool.

⭐ Repair of cracks, cuts and holes in the side walls of the pool

⭐ Sealing damage bottom of the pool, also under water

⭐ Repair of damaged seams and corners

⭐ Strengthening areas exposed to further tearing or leakage

⭐ Repair of frame, expansion and inflatable pools

⭐ Repair of inflatable garden yoke made of PVC/PVC material

⭐ Repair of inflatables for children

How to glue wet (from the inside)? :

1 Cleaning of the gluing site:

⭐ Remove any deposits from the gluing site. You can do this with a sbrush, cloth or sponge.

⭐ Make sure the place is clean even if it is wet.

2 Patch trimming:

⭐ Trim the patch so that it is 3-5 cm larger than the damage.

⭐ For small holes: a patch of about 1-2 cm larger than the hole is enough.

3 Surface preparation:

⭐ Wipe both the patch and the gluing site with abrasive paper with a gradation of 120 – 200 to increase adhesive adhesion.

⭐ After tarnishing the surface, remove the resulting dust.

4 Degreasing:

⭐ Use isopropyl alcohol or another degreasing agent to clean the patch.

5 Glue application:

⭐ Apply glue to the linear patch and around the edges.

⭐ Spread the glue evenly.

⭐ Apply the patch inwater so that the damage is in the middle of the patch.

⭐ Strongly press to ensure good adhesion of glue and patches to the damaged surface.

6 Curing:

⭐ Minimum 24 hours before the adhesive reaches full strength.

⭐ If the layer is thicker or the patch is large, the adhesive may dry a few days.

How to glue dry? :

1 Cleaning of the gluing site:

⭐ Remove any deposits from the gluing site. You can do this with a brush, cloth or sponge.

⭐ Make sure the place is clean even if it is wet.

2 Patch trimming:

⭐ Trim the patch so that it is 3-5 cm larger than the damage.

⭐ For small holes: a patch of about 1-2 cm larger than the hole is enough.

3 Surface preparation:

⭐ Wipe both the patch and the gluing site with abrasive paper with a gradation of 120 – 200 to increase adhesive adhesion.

⭐ After tarnishing the surface, remove the resulting dust.

4 Degreasing:

⭐ Use isopropyl alcohol or other degreasing agent to clean the patch and the gluing site.

5 Glue application:

⭐ Apply glue to the linear patch and around the edges.

⭐ Spread the glue evenly.

⭐ Press the patch to the damaged area.

6 Curing:

⭐ Minimum 24 hours before the adhesive reaches full strength.

☑ The set fits any type of pool

➡ The kit with HYBRID POLYMER GLUE and PVC/PVC patch can be used to repair different types of garden pools. It will work well with damage to walls, bottom, seams and corners.

⭐ frame pools

⭐ expansion pools

⭐ Inflatable pools

⭐ garden pools digged into the ground

⭐ pools made of polyester and lined with PVC / PVC film

⭐ ground pools lined with PVC / PVC membrane

⭐ pools lined with tiles, in places requiring additional sealing

⭐ inflatable and expansion jacuzzi garden

⭐ Inflatable for children

 

☑ Advantages and features of HYBRID POLYMER ADHESIVE

➡ GLUE creates after curing durable, waterproof and flexible connection, resistant to the work of the repaired material.

⭐ Allows to be glued dry, on wet surfaces and directly under water.

⭐ Saves time and water because in many cases the pool does not need to be emptied before repair.

⭐ After curing, it retains elasticity and is resistant to stresses arising during the use of the pool.

⭐ Creates a tight connection that can work together with the repaired PVC/PVC material.

⭐ It is resistant to water, salt water, atmospheric factors and UV radiation.

⭐ Does not contain solvents and is characterized by low odor intensity.

 

☑ Important information before the repair starts

➡ Before gluing, carefully read the instructions appropriate for the selected method of repair: dry or under water from the inside of the pool.

⭐ When working, use the included protective gloves.

⭐ The adhesive surface should be thoroughly cleaned of sediment, dust, grease and residues of the old adhesive.

⭐ In the case of unusual materials, perform an adhesion test on a small part of the surface beforehand.

☑ Glue specifications

⭐ Product type:Adhesive and hybrid sealant

⭐ Base: MS Polymer

⭐ Packaging: 400 g cartridge

⭐ Colour: white

⭐ Method of application: cartouche squeezer

⭐ Epidermal formation time: about 25 minutes

⭐ Curing rate: about 2 mm in 24 hours

⭐ Application temperature: from 0°C to +40°C

⭐ Thermal resistance after curing: from -40°C to +90°C

⭐ Elongation at break: above 700%

⭐ Tensile strength: 2,0 N/mm²

⭐ Volumetric contraction: below 5%

⭐ Water and salt water resistance: YES

⭐ Resistance to atmospheric factors: YES

⭐ Solvent-free, low odor product

Patch technical data:

➡ The included flexible PVC / PVC patch can be self-cut to the size and shape of the repaired damage.

⭐ Material: PVC - flexible polyvinyl chloride

⭐ Dimensions: L. 50cm x W 27cm

⭐ Thickness: 0,5mm

⭐ Colour: blue - blue

⭐ Gluing under water: YES

☑ Patch for swimming pools and mattresses

➡ The included blue PVC/PVC patch is designed to repair swimming pools, inflatable jacuzzis and mattresses. The flexible mesh-reinforced material can be easily cut to the size and shape of the damage.

⭐ A large sheet measuring 50 × 27 cm allows you to prepare one larger patch or several smaller repair elements.

⭐ The patch is suitable for repairing cracks, cuts and holes in PVC / PVC material.

⭐ It can be used when gluing dry, on a wet surface and directly under water.

⭐ Mesh reinforced material is more durable than the standard material used in many garden pools.

☑️ Isopropyl Alcohol IPA with Applicator

➡️ Isopropyl alcohol IPA is used for thorough cleaning and degreasing of the patch and the glued surface before starting repairs. Proper surface preparation improves glue adhesion and increases the durability of the connection.

⭐ Helps remove greasy dirt, oils, and greases

⭐ Facilitates surface preparation before applying glue

⭐ Evaporates quickly after application

⭐ Leaves no greasy residue on the cleaned surface

⭐ The applicator allows for precise dispensing of the product

⭐ Capacity: 100 ml

☑ Included

➡ The kit contains all the basic elements needed to prepare the surface and repair the damaged PVC pool.

⭐ Hybrid polymer adhesive DN KAZUAR H49 AQUA for repairing PVC / PVC pools 400 g - 1 pc.

⭐ PVC patch for swimming pools 50 × 27 cm - 1 pc.

⭐ Isopropyl alcohol 100 ml - 1 pc.

⭐ Abrasive paper with gradation P150 - 140x115mm

⭐ Protective gloves

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With VAT invoice
Parametry	Manufacturer	DARO Narzędzia
Parametry	Kind	repair kit
Parametry	Manufacturer code	Klej Łatka Alkohol Papier Ścierny Rękawice
Parametry	Product weight with unit packaging	0.705 kg
Parametry	Packaging status	original
Parametry	For	inflatable accessories,pool,jacuzzi,mattress,other