Relinė jungtis 16A su WiFi, TUYA

Trumpai apie prekę

Prekė: Relinė jungtis 16A su WiFi, TUYA. Kategorija: Automatizavimo moduliai.

• Gamintojas: Tuya
• Modelis: Tuya Smart Switch WiFi

A WiFi module that will turn your existing switch or outlet into a SMART device. Thanks to it, you will enter a higher level and excessive energy consumption will be forgotten! And all this is controlled from your smartphone or Home Assistant.

Why is it worth it?

• Ability to control traditional switches, stairs
• You don't have to buy anything - use the current switches
• Do not change the outlets to WiFi - the module will do it for you
• Schedule allows programming of multiple on/off times and their length
• Turn on the timer (timer) and the module will turn off the device after a certain time
• Control with Tuya or Smart Life
• Works with Google Home or Amazon Alexa (including voice)
• Convenient control from your smartphone anywhere in the world
• Compact dimensions will allow you to fit the module into most electric cans
• Supported power up to 3500W will allow you to run even the most demanding electrical devices
• In case of voltage loss, the ability to remember the previous state

Characteristics:

• Power: up to 3500W (for LED 150W)
• Tension in. /output: 100÷240V AC 50/60Hz
• Current: up to 16A
• WiFi standard: 2.4 GHz b/g/n (IEEE 802.11)
• Dimensions: 41 x 41 x 20 mm (W) x H x gr. )
• Material: PC V-0
• Operating temperature -10°C...40°C
• Screw contacts
• Pairing/reset button on housing
• Quiet control - does not make annoying sounds

The device works with the Tuya / Smart Life application

Phase (L) and neutral (N) cables must be in the can for the device to work properly.

Available Schedules

1. Timer - Schedule how long the device or switch should work from the moment it is programmed. Minute accuracy will allow you to choose the exact time after which the device will be turned off.

2. Schedule - Schedule when the receiver is to be turned on or when it is to be turned off. Select individual days or multiple at once and the action will be performed at the set time.

AM: 12-hour system, hours from 00:00 to 11:59

PM: 12 hour system, 12:00 to 23:59

Relay Status State - state of the module after voltage failure

Sometimes it happens that the electricity in the house runs out. With this option, it is possible to choose what is to happen to the module when the voltage returns.

Possible modes:

• Disabling the module
• Enabling the module
• Leaving the module in the state in which it was before the voltage disappeared

Save time and money! Each module can be programmed in a separate way but controlled from one place!

Pairing of the device

The device has been designed in such a way that it can be paired with the Tuya / Smart Life application quickly and without problems. The whole process is so intuitive that it should not be difficult for most users.

1. Connect the device of the Wifi relay to the current
2. Make sure that the smartphone is on the 2.4GHz network and has Bluetooth enabled
3. Launch the Tuya / Smartlife app
4. Hold the reset button on the module for 5s until the blue LED flashes
5. The device will be detected and can be added to the app
6. Enter the password for your WiFi network
7. Ready - the device will be added to the application

Possible ways to connect the module

The device, due to its specification and capabilities, can work as follows:

1. Direct control of the receiver: socket or lamp
2. Control with a single switch
3. Control with stair switches

Attention! The device does not work with bell switches.

Scheme of electrical connection

Specifications