Sieninis rekuperatorius KERS+ 50, 160 mm, su nuotoliniu valdymu ir drėgmės jutikliu, 50 m³/h

Trumpai apie prekę

Prekė: Sieninis rekuperatorius KERS+ 50, 160 mm, su nuotoliniu valdymu ir drėgmės jutikliu, 50 m³/h. Kategorija: Rekuperacinės vėdinimo sistemos.

• Gamintojas: no brand
• Modelis: KERS+50

• ☑ Energy class A
• ☑ Quiet operation
• ☑ Ceramic heat exchanger with heat recovery up to 97%
• ☑ Integrated humidity sensor and the ability to choose 1 of 3 humidity levels
• ☑ 4 fan speed levels
• ☑ Remote control
• ☑ Possibility to control the device using touch buttons on the device
• ☑ Noise cancelling acoustic foam included

✔ The recuperator meets the technical requirements specified in the Clean Air Programme

• Model: KERS+ 50
• Airflow 12-19-30-50m3/h
• Diameter: 160mm
• Channel Length: 280-491mm
• Max power: 4,97W
• Power supply: 220-240Vac
• Temp. Environment: -20 + 40˚C
• Sound power level: 26,4dB(A)
• Operating modes: Individual, wired communication with other units
• Manufacturer: IDEAL CLIMA

The KERS+50 wall recuperator is equipped with a ceramic regenerative heat exchanger that accumulates heat when extracting warm air from the room. Then the heat from the exchanger is transferred in order to heat the cool air supplied from the outside.

This process ensures continuous and effective air exchange in residential buildings.

Application:

The KERS+50 recuperator has been designed for use in apartments and public buildings. In addition, the technical parameters meet the requirements specified in the "Clean Air" program

• ☑ Recuperator with ceramic exchanger with heat recovery efficiency up to 97%
• ☑ Energy class A
• ☑ Silent work
• ☑ Twilight sensor
• ☑ Integrated humidity sensor and the ability to choose 1 of 3 humidity levels: 40%, 60% or 90%
• ☑ 4 fan speed levels
• ☑ 4 operating modes
• ☑ No need to drain the condensate
• ☑ Remote control
• ☑ Brushless motor for high efficiency and low power consumption
• ☑ G3 filter at inlet and outlet
• ☑ Possibility to close the front panel when the device is not working
• ☑ Simple and quick installation
• ☑ Easy cleaning and maintenance

☑ Supply mode- The device supplies external air to the room. In this mode, the humidity sensor is not active.

☑ Recuperation mode- The device works with heat recovery. It alternately removes used air by heating the integrated ceramic exchanger and then supplying a stream of fresh air at elevated temperatures. The flow direction changes every 60 seconds. In this mode, the humidity sensor is active.

☑ Exhaust mode- The device removes air from the room. In this mode, the humidity sensor is not active.

☑ Night mode- The device is equipped with a dusk sensor. If this mode is active, the device operates at the lowest fan speed.

☑ Humidity mode- The device constantly controls the level of relative humidity in the room. It is possible to set 1 of the 3 maximum humidity thresholds for the hygrostat to adapt it to the room in which it works. When the set humidity level is exceeded, the device will operate in the set mode at the maximum fan speed.

• In the case of combined operation of several units, all devices will work at maximum speed until the humidity drops to the desired value

☑ Boost Mode- In this mode, the device draws air out of the room for 30 minutes with maximum efficiency.

Thanks to the humidity sensor used, the device constantly controls the level of relative humidity in the room. It is possible to set a maximum humidity threshold for the hygrostat to adapt it to the room in which it works. When the humidity level is set, the device will draw air out of the room continuously until the sensor reading falls below the set value.

In the case of combined operation of several units, all devices will work in extraction mode until the humidity drops to the desired value.

The KERS+50 system operates on the principle of variable ventilation. The device alternately removes used air, heating the integrated ceramic exchanger, and then through the same exchanger flows a stream of fresh filtered air at an elevated temperature.

The flow direction changes every 60 seconds so that it effectively removes excess moisture and controls its level in the room

✔ option available only when purchasing a WiFi module (available at our other auctions for PLN 180.00)

The option to set individual operating parameters for each room will allow you to create independent ventilation zones.

The device can be controlled via Smart Life mobile app, Amazon Alexa, Googe Home

1. ☑ Air supply
2. ☑ Air extraction
3. ☑ Enable/Disable
4. ☑ Recuperation mode
5. ☑ Night mode
6. ☑ Fan speed selection
7. ☑ Boost mode
8. ☑ Mode with active humidity sensor

1. Front panel
2. Mounting plate
3. Air filter
4. Mode with exchanger and fan
5. Channel length 500 mm
6. Soundproofing
7. External grille

Specifications