Signalizacijos rinkinys Satel PERFECTA 64 M 2G/4G LTE su RF moduliu ir INT-TSH2R-B, 10Wb

Trumpai apie prekę

Prekė: Signalizacijos rinkinys Satel PERFECTA 64 M 2G/4G LTE su RF moduliu ir INT-TSH2R-B, 10Wb. Kategorija: Išoriniai moduliai.

• Gamintojas: Satel
• Modelis: [10Wb] Perfecta 64 M + INT-TSH2R-B + RF +++

The auction concerns:

Complete [10Wb] :

1. Perfecta 64 M control panel + antenna ANT-LTE-I

2. Perfecta RF - radio module 434 MHz ( MICRA system)

3. INT-TSH2R-B - 7" (black) keypad with MIFARE card reader

4. OPU-3 P - plastic housing

5. AWT-150 transformer 40VA 230/16/18VAC

6. 12V/18Ah battery

This is important information...

** NOTE - ONLY ONE of the following devices can be connected:

controller ACU-220 / ACU-280 (ABAX system - 868 MHz)

or PERFECTA-RF module ( MICRA system - 434 MHz)

or the INT-RX-S pilot expander.

CANNOT be used in the system SIMULTANEOUSLY wireless devices ABAX 2 and MICRA

1. PERFECTA 64 M - control panel.

It is designed to secure objects such as apartments, single-family houses, segments in terraced houses, offices, etc. Provides protection in accordance with the requirements of Grade 2 EN 50131. The control panel is characterized by simple configuration and easy and intuitive operation using manipulators, including models with touch screens. The alarm system functions can also be controlled remotely using the PERFECTA CONTROL mobile app and remote controls.

The PERFECTA 64 M control panel allows you to create a wired or wireless installation - you can connect one of the controllers of the ABAX 2 system (ACU-220 or ACU-280 operating in the 868 MHz frequency band) or PERFECTA-RF, i.e. MICRA wireless system module (433 MHz frequency band). Alternatively, the INT-RX-S remote control module can be connected to the control panel.

The PERFECTA 64 M control panel uses an LTE module operating in 2G and 4G LTE mobile networks.

It enables cooperation with a mobile application with PUSH message support, remote system configuration using PERFECTA Soft, event monitoring (e.g. to the monitoring station of the security agency), voice notification, SMS control and audio verification (listening to sounds from the protected facility). It supports two nano-SIM cards, which ensures continuity of communication: in the absence of connectivity to the network of the first operator, the second card is automatically selected.

The control panel electronics board is equipped with 8 inputs and 4 wired outputs. Their number can be increased by connecting expansion modules: INT-E input expanders and INT-O or INT-ORS outputs. This allows you to expand the system by attaching more detectors, beacons and even actuators (to control the garage door, blinds, garden sprinklers). The INT-CR zone control module can also be connected to the control panel. Thanks to it, proximity cards and keychains can be used to control selected functions of the system.

The system based on the PERFECTA 64 M control panel can be divided into four zones, with a choice of three standby modes (day, night, full). Zones can be independent of each other or contain common parts (indicated entrances).

Configuration of the system can be done in two ways: from a computer with PERFECTA Soft installed (locally - connection via RS-232 port (TTL), remotely - via data transmission in the mobile network*) and with the help of a keypad.

• Compliance with EN 50131 Grade 2

Division of the system into 4 zones - 3 surveillance modes in each zone

• possibility of assigning the entrance to 1~4 zones
• control by the user or by timers
• 8 wired programmable inputs on the control panel:

  - configuration selection: NO, NC, EOL, 2EOL/NO, 2EOL/NC

  - possibility of operating roller shutter and shock detectors

• up to 64 programmable inputs
• 4 programmable wired outputs on the control panel:

  - 2 high current outputs (power supply) 1000mA

  - 2 low current outputs type OC - max. 25mA

• KPD output - max. 500mA
• AUX output - max. 500mA
• maximum 64 programmable outputs (including 4 outputs dedicated to MICRA system beacons)

Embedded modules:

- 2G/4G LTE mobile communicator with 2 nano-SIM sockets (SMS, monitoring to the station, mobile application, PUSH notifications)

- voice (playing voice messages for telephone notification) acoustic alarm verification (listening to sounds)

Communication bus for connection:

• INT-TSH2, INT-TSG2, INT-KSG2R, PRF-LCD
• INT-E, INT-O, INT-ORS expansion modules
• ABAX 2 wireless controllers: ACU-220 or ACU-280**
• INT-RX-S remote control expander**
• INT-CR zone control modules
• communication connector for connection - MICRA PERFECTA-RF** wireless system module

Maximum number of wireless devices supported:

- ABAX 2: system for up to 4 keypads / up to 48 detectors, beacons or other devices

- MICRA system: up to 4 manipulators / up to 64 detectors / up to 4 beacons

Cooperation with wireless manipulators:

PRF-LCD-A2 - in ABAX 2 system

PRF-LCD-WRL - in MICRA system

Control the system with:

• manipulators
• PERFECTA CONTROL mobile application
• remote controls
• proximity cards and keychains

Passwords: 62 user passwords and 1 service password

• editing of names (users, zones, inputs, outputs and modules) facilitating system control and supervision
• 8 timers with the ability to set exceptions
• 8 thermostats
• memory of 3584 events
• automatic diagnostics of basic system components
• built-in switching power supply:

  - overload protection

  - protection against complete battery discharge

  - battery charging current adjustment

  Programming of control panel settings:

  - locally - manipulator or computer with PERFECTA Soft installed,connected to RS 232 (TTL) port of the control panel

  - remotely -computer with PERFECTA Soft installed,connecting to the headquarters using data transmission in the mobile network*

* support for data transmission in LTE/EDGE/GPRS technology - depending on the capabilities of the mobile network

Ability to update software (firmware) locally or remotely

2. PERFECTA-RF - wireless radio module

It is an optional element of the PERFECTA 64 M control panel. It is used to expand the alarm system with MICRA wireless devices. It also allows users to control the alarm system with MICRA remote controls, e.g. MPT-350

• cooperation with PERFECTA 64 M control panels by direct connection to the connector located on the control panel

Support for MICRA radio equipment:

• up to 64 detectors
• up to 4 beacons
• up to 4 manipulators
• up to 62 pilots

- encrypted radio communication in the 433 MHz frequency band

- Two-way communication with keypads and wireless beacons

- up to 6 control functions available from the MPT-350 remote control

3. INT-TSH2R-B (black) 7" keypad with touch glass screen and proximity card reader MIFARE

Characteristics:

INT-TSH2R-B

7” capacitive glass touch screen + MIFARE proximity card reader.

The INT-TSH2R manipulator is used to operate and program INTEGRA, INTEGRA Plus, VERSA, PERFECTA 64 M and PERFECTA-IP 64 M control panels. It is an ideal solution for people who expect convenience during everyday control of the alarm system and building automation elements - also the KNX system. The combination of a large display and universal design makes this device perfectly fit into both modern and traditionally decorated interiors.

Features:

• 7” capacitive glass touch screen with gesture support
• 1024x600 resolution, 16,7 million colors display (true color)
• multi-level graphical interface adapted to the needs of the user
• up to 24 user screens
• ability to configure and customize interface screens to the needs of the user
• more than 20 ready-made graphic motifs with the possibility of creating your own composition
• widgets enabling manipulator operation, control of alarm system and automation devices connected to the control panel
• controlling the system with MAKRO commands running a number of different functions in the control panel (including building automation)
• ability to quickly trigger alarms ATTACK, FIRE, HELP
• cooperation with INTEGRA and INTEGRA Plus control panels (INTEGRA Firmware 1.20 or later), VERSA (VERSA Firmware 1.10 or later), PERFECTA 64 M and PERFECTA-IP 64 M
• screensaver with the ability to display the clock, date, states of system elements (zones, inputs, outputs), temperatures (INTEGRA, INTEGRA Plus, PERFECTA 64 M, PERFECTA-IP 64 M)
• possibility of displaying a slideshow (photo frame function)
• indicators of the current state of the system placed in the status bar
• built-in proximity card reader MIFARE® 13,56 MHz (supported only by INTEGRA and INTEGRA Plus, PERFECTA 64 M, PERFECTA-IP 64 M control panels):
• Ultralight CSN/SSN
• Classic CSN/SSN/MSN
• DESFire (EV1/EV2/EV3) CSN/MSN
• 2 programmable wired inputs (supported only by INTEGRA and INTEGRA Plus control panels)
• operation of NO and NC detectors and roller shutter and vibration detectors;
• support for EOL, 2EOL and 3EOL configurations (3EOL in case of cooperation with the INTEGRA Plus control panel);
• programming of parametric resistors values
• Built-in speaker for sound signaling
• ability to adjust the volume of signaling
• possibility of adjusting the backlight with the “day/night” division
• built-in microSD memory card reader (storage of photos to the photo frame, background of additional screens, sounds for violations of inputs - gongs)
• Tamper contact reacting to the opening of the housing and detachment from the wall
• available in white (INT-TSH2R-W) and black (INT-TSH2R-B)

Technical data:

• Supply voltage (±15%) --- 12 V DC ±15% V DC
• Operating temperature range --- -10°C...+55°C
• Standby Current Consumption --- 350 mA
• Maximum current consumption --- 475 mA
• Weight --- 386 g
• Maximum humidity --- 93±3%
• Environmental class according to EN50130-5 II
• Degree of protection according to EN 50131 Grade 3
• Supported memory cards --- microSD, micro SDHC
• Housing dimensions (width x height x thickness) --- 196 x 129 x 22 mm
• Reader operating frequency --- 13,553...13,567 MHz
• MC-DF3-2 encrypted card reading range up to 40 mm

4. OPU-3 P plastic housing - Satel.

SURFACE MOUNTED.

Note!!! - the presented equipment inside the housing is illustrative.

Universal plastic housing made of polystyrene (plastic with flame retardant) with space for TR40VA or TR60VA and 18Ah/12V battery and additional accessories.

DESCRIPTION

Universal enclosures from the OPU-3 series are dedicated to devices manufactured by SATEL.

They are made of polystyrene in white.

They can be installed in enclosed spaces.

The housing is equipped with a holder designed for GSM antenna and has two tamper contacts reacting to the opening of the lid

and detachment from the ground.

Included with the housing – in addition to tamper contacts – there are dowels, spacers, two wires for connecting the transformer and additional screws.

Properties :

• Double tamper protection
• Possibility of installing wireless devices with antennas inside the enclosure
• Dimensions: 324 x 382 x 108 mm
• Weight: 1,85 kg
• Battery space: 7,2Ah or 18Ah
• Transformer space: 40VA or 60VA
• Possibility of mounting the APS-412 power supply in place of the transformer

Application:

- alarm control panels manufactured by SATEL

- expansion modules manufactured by SATEL

- GSM communication modules manufactured by SATEL

5. AWT-150 transformer 40VA 230/16/18VAC

6. 12V/18Ah battery

Note!!! - the battery is intentionally not presented LOGO - the reason is a very high rotation of battery models - dot. their production and new supplies.

Most often these are batteries of the MW Power brand - series: MWS ; MW ; MWL ; MWP or IPS brand

ALL models of control panels and products of the SATEL brand are in adjacent auctions.

Specifications