Šildoma kėdės pagalvėlė EINPARTS, 12V, 2 režimai

Trumpai apie prekę

Prekė: Šildoma kėdės pagalvėlė EINPARTS, 12V, 2 režimai. Kategorija: Šildomos ir masažuojančios sėdynių užvalkalai.

• Gamintojas: EinParts

🔥 The EPACC111 car seat heating mat is a practical solution for cold autumn and winter days. Just plug it into the 12V cigarette lighter socket to start feeling pleasant warmth after about 3 to 5 minutes.

🚗 The mat heats both the seat and the backrest of the seat, increasing the comfort of travel at low temperatures. The universal design allows it to be used in most passenger cars equipped with a 12V installation.

🎚 Built-in switch offers three settings: LOW / HIGH / OFF. LOW and HIGH modes are responsible for different heating rates – the target temperature remains the same.

✅ Key advantages:

• 🔥 Fast heating in about 3 to 5 minutes
• 🌡 Perceptible surface temperature approximately 50 – 55°C
• 🎚 Control LOW / HIGH / OFF
• 🔌 Power supply directly from cigarette lighter socket 12V
• 🛡 Automatic thermal protection
• ⚡ Overload fuse 10A
• 🚗 Universal use in passenger cars
• 🔧 Easy installation with straps and hooks
• 🧼 Easy to clean surface with a damp cloth
• 📏 Large area 96 × 48 cm
• 🌡 Automatic temperature control

The mat is equipped with thermal protection, which controls the temperature during operation.

When the internal temperature reaches about 65°C, the heating is automatically interrupted. After the temperature drops, the system starts working again.

Thanks to this, the mat cyclically regulates heating, helping to maintain comfortable conditions of use.

🎚 LOW and HIGH modes

Operation is carried out using a simple switch placed on the cable:

🔥 HIGH – faster heating

♨ LOW – slower heating

⏹ OFF – turning off the mat

LOW and HIGH modes do not change the target temperature, but affect the speed of its achievement.

🛡 Built-in security

The mat is equipped with two important protective elements:

🌡 Thermal protection – automatic disconnection of heating after exceeding about 65°C

⚡ Fuse 10A – protection of the installation against overload

🔧 Simple and stable installation

The mat is attached to the seat with 2 hooks and 2 straps, which help to keep it in the right position while driving.

The structure has been prepared so that when properly installed do not cover the side zones of airbags located in the seat.

🧼 Easy to clean

The surface is made of polyester fabric, which can be cleaned with a slightly damp cloth.

⚠ The material is not waterproof and is not intended for washing or immersion in water.

⚙ Technical specification:

• Model: EPACC111
• Type: heating mat for car seat
• Power Supply: 12V
• Power supply: cigarette lighter socket
• Power: 31 / 39W
• Adjustment: LOW / HIGH / OFF
• Heat-up time: about 3 to 5 minutes
• Maximum internal temperature: about 65°C
• Surface temperature: approximately 50°C to 55°C
• Temperature tolerance: ±5°C
• Thermal protection: yes
• Fuse: 10A
• Dimensions: 96 × 48 cm
• Cable length: 120 cm
• Material: polyester
• Water resistance: no
• Cleaning method: damp cloth
• Attachment: 2 hooks + 2 straps

📦 Included:

• 🔥 1 × heating mat EPACC111
• 🔌 Power cord with plug for 12V socket
• 🎚 LOW / HIGH / OFF Controller
• 🔧 Fasteners integrated into the mat

Specifications