Skaitmeninis palydovinės antenos signalo matuoklis su LCD ekranu

Trumpai apie prekę

Prekė: Skaitmeninis palydovinės antenos signalo matuoklis su LCD ekranu. Kategorija: Matuokliai, signalo stiprintuvai.

• Gamintojas: Lewer
• Modelis: SF-96

Digital

The times of “analog” satfinders with a clue too fast are slowly fading into oblivion. For some time now, their counterparts displaying percentage indications using an LCD display have been timid on the market. Representative of this group of FINDER products by LIBOX. The digital signal meter is controlled by a microprocessor, which makes it highly accurate and reliable. The signal strength is graphically represented on the LCD display by numbers (0-99)

Service

• Set the reading on the Lcd display to 10%-20% by adjusting the signal level using the potentiometer on the side of the meter. Turning the knob clockwise will increase the reading.
• By slowly rearranging the azimuth and the position of the antenna in the horizontal axis, reach the maximum indication miernika.Po to achieve the maximum reading, turn the signal sensitivity knob counterclockwise so as to receive a reading of about 50%.
• Re-set the antenna to reach the maximum meter indication. Repeat the above until you get the maximum reading.
• DO NOT use the meter directly under the antenna. Using a converter with a gain of more than 60 dB, install a 5 dB silencer between the LNB converter and the signal meter.

• satellite meter
• in Polish user manual
• original packaging

• Purpose: Finding a satellite solution
• Power Supply: DC 13-18V
• Impedance: 75 Ohms
• Frequency range: 950-2150 MHz
• Minimum level at input: -40 dBm
• Maximum level on input: -10 dBm
• Display: Backlit LCD
• Silencer: Yes, three-stage
• Sound signaling: Yes
• Compass in housing: Yes
• Dimensions of the device: 12 x 6,5 x 2,5 cm

Specifications