Pastiprinātājs KICX HeadShot DM 2.1800, 2 kanāli, 2x1800W / 1x3600W RMS, ar tālvadības pulti

Trumpai apie prekę

Prekė: Stiprintuvas KICX HeadShot DM 2.1800, 2 kanalai, 2x1800W / 1x3600W RMS, su nuotolinio valdymo pultu. Kategorija: Stiprintuvai.

• Gamintojas: Kicx
• Modelis: dwukanałowy

✳ ✳ ✳ Kicx HeadShot DM 2.1800 – High-performance Class D amplifier (Full Range).

✴ ✴ ✴ The HeadShot DM 2.1800 is an advanced 2-channel unit designed to support demanding speaker systems with high power requirements. The design is distinguished by its stability at a load of 1 Ohm per channel and a wide frequency response.

⭐ ⭐ ⭐ The amplifier works in digital class D, which ensures high energy efficiency while maintaining compact dimensions. Thanks to the use of an efficient converter and robust power terminals, the device is able to deliver for each channel up to 1800W RMS at 1 Ohm and up to 3600W continuous power (RMS) in bridge mode at 2 Ohm, which makes it an ideal solution for both woofer sections and extensive midrange (door) systems.

⚡ ⚡ ⚡ The amplifier reaches power: 2x800W RMS at 4 Ohm, 2x1200W RMS at 2 Ohm and 2x1800W RMS at 1 Ohm. In bridged mode it is as much as 1x3600W RMS at 2 Ohms.

➡ BASS Remote INCLUDED.

➡ HeadShot series amplifiers are characterized by very good technical parameters in SENSATIONAL VALUE FOR MONEY.

⚙ TECHNICAL CHARACTERISTICS ⚙

• Stability at 1 Ohm Stereo: The amplifier has been optimized to operate with low impedance. It offers 2x 1800W RMS at 1 Ohm, which allows you to connect multiple speakers in parallel without the risk of overheating or shutdown (protect).
• Full Range Architecture: Unlike typical monoblocks, the DM 2.1800 processes the full acoustic band (10 Hz – 25 000 Hz). This allows you to power not only subwoofers, but also demanding front systems (midbasses + tweeters).
• Efficient power supply: The device is equipped with input terminals for cables with a cross-section of 53 mm² (0 GA), which minimizes voltage drops at peak current consumption.
• Precise filter section: Built-in high-pass (HPF) and low-pass (LPF) filters with a wide range of adjustments allow for accurate bandwidth cut-off, eliminating the need for external active crossovers.

⚙ BASIC TECHNICAL DATA ⚙

• Number of channels: 2
• Amplifier class: D
• Rated Power 4 Ohms: 2x800W RMS
• Rated Power 2 Ohms: 2x1200W RMS
• Rated Power 1 Ohm: 2x1800W RMS
• Rated Power / Bridge 2 Ohms: 1x3600W RMS!
• Suppression factor (1Ω): > 100 dB
• Signal-to-noise ratio, dB: > 90
• Harmonic distortion: < 0,2%
• Power supply voltage: 12-14,4V
• Input sensitivity: 0,2-6V
• Channel separation: > 60 dB
• High-pass filter range HPF, Hz (12 dB / oct): 10-1000
• Low pass filter range LPF, Hz (12 dB / oct): 50-5000
• Scope of frequency played, Hz: 10-25000
• Dimensions, mm (Dimensions): 232 X 67 X 430
• Speaker connectors: 8GA (8,5mm2)
• Power connectors: 0GA (53mm2)
• BASS CONTROL REMOTE CONTROL INCLUDED

🎵 USE IN CAR AUDIO INSTALLATIONS 🎵

• 1 SPL (Sound Pressure Level) Systems: With 1800W RMS at 1 Ohm per channel and 3600W RMS at 2 Ohms per bridge, the amplifier is dedicated to powering high-performance subwoofers.
• 2 "Open Show" systems: Wide frequency response and high power per channel make the DM 2.1800 perfect as a drive source for speaker "walls" (many mid-range speakers in the door).

✅ SET INCLUDES:

• Amplifier
• Screws for mounting
• Bass control remote control
• Warranty card
• Instructions

Specifications