Stumdomų vartų valdiklis ELMES STB24VM1, 24V DC varikliui

Trumpai apie prekę

Prekė: Stumdomų vartų valdiklis ELMES STB24VM1, 24V DC varikliui. Kategorija: Išoriniai moduliai.

• Gamintojas: Elmes
• Modelis: STB24VM1 Sterownik BRAMY przesuwnej 24VDC

STB24VM1 – controller for sliding gate with ONE motor for 24V DC.

For the controller NECESSARY is (with adequate power) TRANSFORMER 24VAC or POWER SUPPLY 24VDC.

Attention! - the controller is also available in various hardware and dot configurations. usage

different types of ELMES remote controls, signal lamps, photocells and off. extremes.

Cooperation ONLY with prod pilots. ELMES and selected models of prod pilots. PROXIMA dedicated for ELMES devices.

In other auctions there are sealed plastic housings for controllers.

The auction concerns:

STB24VM1 – controller for 24V DC SLIDING gate.

The device is designed to control ONE motor of direct current 24V DC,

in which a change in direction of movement is achieved by changing the polarity of the power supply.

Has the following features:

• KEELOQ® variable code technology for a high level of security;
• superheterodyne radio receiver;
• control of the remote control or wall switch in the cycle: opening-stop-closing-stop ...etc.;
• cooperation with all pilots on the 433,92 MHz band produced by Elmes Elektronik;
• pilot memory: 112;
• soft start and stop of the engine – protects the drive against mechanical overloads and increases the durability of the drive;
• engine release at stop – protects the drive against mechanical overloads and increases the durability of the drive;
• loosening of stresses arising in the drive after closing the gate by giving a short impulse to open;
• overload protection (overcurrent) determined independently for each direction separately;
• self-closing after the programmed PAUSE time;
• the possibility of blocking the self-closing with a remote control;
• work in parking mode – the remote control only calls opening, does not stop the gate and does not close;
• cooperation with mechanical or magnetic limit switches, type NO (normally open) or NC (normally compact);
• the ability to work without limit switches;
• output to a warning (flashing) or lighting lamp;
• cooperation with NC type photocell (normally closed);
• the possibility of accelerated closing of the gate after releasing the photocell;
• Additional features to increase the safety of use:

- STOP input for connecting additional security devices,

- automatic closing of the gate preceded by three seconds of flashing of the lamp;

- programmable engine operating time – protection in case of damage to the ends.

Technical data:

• Power supply: 24V AC transformer or 24V DC power supply
• current consumption (without photocell connected and motor off): max: 100mA,
• engine protection 6,3 A,
• maximum lamp power 40 W,
• 24 VDC photocell power output, max. 240 mA,
• overload protection threshold: 2 - 7,5 A,
• engine operating time 1s . . 60 minutes
• PAUSE time or lamp light after stopping 1 . . 255 s,
• operating temperature range from -20 st.C to +55 st.C,
• dimensions (length /lat. /height ) 140/75/30 mm.
• superheterodyne receiver for 433,92MHz band

Specifications