Piegādes termiņš visā Lietuvā: 5-7 darba dienas.
Piegādes cena uz norādīto adresi: 3 eiro
Apraksts
Trumpai apie prekę
Prekė: Suvirinimo aparatas FANMIG J5 LCD su nauja M1 rankena, komplektas Nr. 2. Kategorija: Pusiau automatiniai suvirinimo aparatai.
- Gamintojas: MOST
- Modelis: 510005LCD2
Welding kit MOST FANMIG J5 LCD NO. 2
Set configured for diameter 0,8mm-1,0mm.
Welding kit based on a modern inverter semi-automatic welding machine with LCD display for MIG/MAG welding, MMA or TIG DC wrapped electrode with arc glow by rubbing (LIftArc). The device is used for welding steel or stainless steel in a gas mixture cover. Basic applications include crafts, car flashing machine, hobby work, renovations, etc.
Extract and weld!
A set selected by our specialists will allow you to start welding work without any problems.
Cheaper included!
The best price, you will not get such a price by completing this set yourself.
- Designed mainly for hobby and workshop applications, but also performs well in industry.
- MIG/MAG, TIG Lift and MMA welding with a wrapped electrode.
- Ready To Weld - Ready to Weld!
Method of use
Before starting work, please read the instruction manual attached to the device.
Comes with
- Semi-automatic welding machine MOST FANMIG J5 LCD
- Welding wires (mass and electrode included)
- Welding torch MOST M1 S-GRIP 3m
- Set of parts for handle M1 MOST
- Welding visor MOST ARCHON with automatic filter.
- Welding gloves MOST HURON.
- Cylinder with Arg/Co2 8L mixture.
- Gas reducer Arg/Co2 MOST BLACK.
- Welding wire G3Si1 GOLD 5KG 0,8mm.
- Welding electrodes MOST 6013 (pink) diameter 2,5mm 1KG.
- Magnetic polygon MOST - size S
- Magnetic triangle MOST - size S
- Anti-chipping preparation MOST UFO SPRAY, 400ml.
- Technical dishwasher CLINO 3 500ml
- Welding pliers MOST
The LCD control panel shows all the basic functions of the device:
- Selection of welding method.
- Selection of synergistic MIG/MAG programs.
- Selection of electrode diameter for MMA and TIG DC method.
- For Manu MIG method, inductance setting.
- Enabling/disabling the VRD function for the wrapped electrode.
- Numerous additional functions.
Semi-automatic welding machine MOST FANMIG J5 LCD
The front panel is equipped with an LCD display. The value of the parameter is set with a knob, after pressing it, the settings are approved. There are two synergistic programs for welding steel with 0,8 mm and 1,0 mm diameter wire in a gas or CO2 mixture sheath and manual MANU MIG settings. Depending on the selected wire diameter, the knob changes both the welding current and the wire feed speed at the same time. The device can also be welded using self-shielding powder wires with a diameter of 0,8 - 0,9 mm after changing the polarity.
The wire feeder allows wire welding from 5 kg/D200 or 1 kg spools. The recommended diameters of steel wires are 0,8 mm and 1,0 mm.
The device is protected against overheating by a fan and thermal sensor. The device is made in accordance with EN 60974-1.
- LCD display.
- Higher welding current than similar, traditional semi-automatics powered from the 230 V mains.
- Very good welding properties in both MAG and MMA methods.
- Possibility of TIG DC welding with arc ignition by rubbing.
- Eurosocket for connecting any MIG/MAG holder.
- Typical mass socket (35/50).
- 2-roll feeder.
- Low weight only 9,9 kg thanks to the use of inverter power source, quiet fan.
- Wide range of MIG/MAG welding current: 30-200A, TIG: 10-180A, MMA: 10-160A.
- Power supply:230V
- Idle voltage: 60V
- Network security: 16A
- Speed. wire feeding: 2-11,5m/min/li>
- Working cycle: MIG/MAG: 200A (20%) | 90A (100%), MMA: 160A (20%) | 71,5A (100%)
- Protection rating: IP 21S
Welding visor MOST ARCHON with automatic filter
- Effectively protects eyes and face from sparks, chipping and harmful UV/IR rays.
- It can be applied to any welding method.
- True View+ technology, 4 detection sensors.
- Darkening range: 4 to 13 DIN.
- Power supply: solar cells + 2x CR2450.
- Standards: ISO 16321-1:2022, ISO 16321-2:2021.
Anti-chipping preparation MOST UFO.
- Agent to prevent chipping from sticking in the welding process.
- Facilitates the removal of chipping and contaminants from the surfaces of welded metals and gas nozzles.
- Does not contain silicones and solvents.
Technical dishwasher CLINO 3
- A special protective agent against sticking and blending of chippings into welding visors.
- It perfectly cleans and maintains both the visor itself and the replacement glass, which extends their service life.
- Creates an invisible protective coating. It is safe during use.
- It has antistatic properties so it does not attract dust and debris.
Specifications
| Group | Name | Value |
|---|---|---|
| Parametry | Condition | new |
| Parametry | Invoice | With VAT invoice |
| Parametry | Brand | MOST |
| Parametry | Manufacturer code | 510005LCD2 |