Suvirinimo aparatas MAGNUM MIG 240 DUAL PULSE LCD, TIG

Trumpai apie prekę

Prekė: Suvirinimo aparatas MAGNUM MIG 240 DUAL PULSE LCD, TIG. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Magnum
• Modelis: U MI 240 DP LCD ZESTAW#4
• Ilgis: 662 mm
• Plotis: 340 mm
• Aukštis: 450 mm

+ SET FOR WELDING MIG/MAG, MMA, TIG, WHICH INCLUDES:

✅ HANDLE TIG LIFT TIG-17V

✅ 2 CYLINDERS WITH REDUCER

✅ WELDING WIRE 0,8mm 5 KG

✅ WELDING ACCESSORIES

➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖

MAGNUM MIG 240 DP LCD SYNERGY welding machine, is a technologically advanced semi-automatic welding machine, designed for arc welding by the following method:

• MIG - Welding MIG-MAG synergistic
• MIG PULS- Single pulse synergistic MIG
• MIG 2-PULS - Double pulse synergistic MIG welding
• MMA - Welding with wrapped electrodes (rutile, alkaline, acidic).
• TIG LIFT DC - Welding by TIG Lift method
• TIG LIFT DC PULS- Welding by TIG Lift method with pulse
• FLUX - Self-shielded wire welding

as well as SOLDERING OF GALVANIZED SHEETS.

The device has been designed for all kinds of welding work in car, locksmith workshops, repair workshops, industrial workshops, factories, etc.

The welding machine is dedicated to professionals who require the highest standards for welding equipment.

The MAGNUM MIG 240 DP LCD SYNERGY welding machine is used for welding:

✔ non-alloy steel

✔ low alloy steel

✔ alloy steel

✔ stainless steel

✔ acid-resistant steel

✔ titanium

✔ copper and its alloys

✔ aluminium and its alloys

➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖

➡ The device is equipped with overload protection, which increases its reliability.

❄ The device has a fan cooling system which significantly increases its efficiency.

The MAGNUM MIG 240 DP LCD SYNERGY device has, among other advantages, a synergistic program for welding aluminum alloys and soldering with CuSi3 wire, unparalleled in this class of devices. The design and software allows you to obtain the highest quality weld when welding any weldable materials, made of black steel, stainless steel, copper alloys and aluminum.

☀ SYNERGY - is a ready-made program, thanks to which, based on several entered data, it facilitates the preparation of the device for work in an appropriate way. Synergy is a great convenience for DIYers as well as professionals.

The design and software, combined with digital control via a microcontroller, allows for the highest quality welding parameters, especially when welding aluminum and its alloys.

Inductance adjustment allows optimization of arc characteristics depending on the thickness of the welded element and the welding method and conditions.

The function is useful during MIG/MAG welding of thin elements, preventing them from burning out and soldering galvanized elements.

The thinner the MIG/MAG welded element, the higher the inductance (soft arc - less melting), for thick elements vice versa (hard arch - greater melting).

The standard neutral inductance setting is in the middle of the scale.

Changing the inductance value also reduces the amount of welding chips during CO2 shielded welding.

The optimal setting of the inductance value depends on several factors and may differ from the standard recommendations, it should be selected during welding tests by manipulating the potentiometer knob.

THANKS TO THE INDUCTANCE ADJUSTMENT, THE WELDING MACHINE IS SUITABLE FOR SOLDERING!

☀ VERSATILITY OF THE DEVICE ☀

Migomat company MAGNUM is a device with a wide range of applications, designed as an inverter power source enabling welding with hot melt wire in a gas shield MIG/MAG or FCAW self-shielding wire (after changing polarity), welding with a buffer electrode MMA, as well as the TIG Lift method.

✔ MIG/MAG welding

Arc welding in gas shields is one of the most commonly used processes for the manufacture of welded structures. The semi-automatic welding process involves melting the edges of the welded object and the material of the hot melt electrode with the heat of an electric arc glowing between the electrode in the form of a solid wire and the welded detail, in an inert or active gas shield.

✔ Welding MMA

In the MMA method, a wrapped electrode is used, consisting of a metal core covered with a sheath. An electric arc is produced between the end of the electrode and the welded material. Arching is created by touching the end of the electrode to the welded material.

✔ Welding TIG DC

In the TIG (Tungsten Inert Gas) method, the electric arc is ignitioned in an inert gas (argon) shield between the welded element and the non-melting electrode, made of pure tungsten or tungsten with additives. In TIG DC Lift mode, the arc glow occurs when the electrode comes into contact with the welded element. In TIG DC mode, the current is constant.

✔ Self-shielding wire welding FCAW

Thanks to the polarity change function, it is possible to weld without shielding gas, with FCAW self-shielding wire. The wire is designed for general production work, also in field conditions, and for welding structures that are not subject to impact requirements. Welding current DC(-).

Self-shielding powder wire fi 0,8mm/1kg E71T-GS is designed for welding ordinary carbon steels and increased strength not exceeding 510 MPa.

It is used in prefabrication, construction, tank production, agricultural equipment, etc. Used in both production and repair of equipment.

SELF-SHIELDED WIRE IS AVAILABLE SEPARATELY AT OUR AUCTIONS AND IN OTHER SETS

APPLICATION

• Designed for all welding positions, single-layer inguinal and butt welds, during automatic and semi-automatic welding.
• It can be used for aluminium and galvanized steels with a thickness of 1,2 – 5,0 mm.
• Developed for general use when there are no impact resistance requirements.

ADVANTAGES AND FUNCTIONS OF THE WELDING MACHINE:

⭐INVERTER TECHNOLOGY IGBT-ang. Insulated Gate Bipolar Transistor - is a modern technology based on bipolar transistors with an isolated gate. It combines the ease of control of field transistors with high breakdown voltage and switching speed of bipolar transistors. The use of IGBT technology has the effect of significantly extending the reliable operation of welding equipment.

⭐EASE OF USE - The welding machine is equipped with an easy-to-use control panel and LCD display, so it can be used even by amateurs.

⭐ MOBILITY AND CONVENIENCE - CHASSIS WITH SPACE FOR A CYLINDER - The welding machine has a chassis with swivel wheels at the front. On the back of the device there is a place for a cylinder with shielding gas and a handle to protect the cylinder from movement.

⭐WORK IN INDUSTRY - thanks to its high quality and multifunctionality, the device can be used in professional and industrial work.

⭐ EUROCONNECTOR - allows you to quickly change the handle and allows you to change the polarity for welding with self-shielding wire.

⭐ FAN COOLING SYSTEM, which significantly increases its efficiency.

⭐ OVERLOAD PROTECTION, ensures the reliability of the device.

⭐MEMORY 36 CHANNELS - The device has 36 memory channels on which the user can save and recall any settings.

⭐ SOLDERING - is a method that resembles MIG/MAG welding to a large extent, but the energy supplied in this case is much less. This means that soldering is used to join thin sheets covered with a layer of zinc. The described method is a bonding process during which solder melts, not the material with which we work.

⭐ SYNERGY - Thanks to the perfectly selected algorithm of the synergistic program and digital process control, this device is extremely easy to use and allows people even without welding experience to make welded joints.

⭐ TWO-BAR 2T - pressing the button initiates gas outflow and welding current, releasing the button turns off welding current and gas outflow

⭐ S2T - Special two-bar with hot start and final current.

⭐ FOUR-BAR 4T - pressing and releasing the handle button initiates gas outflow and welding current, re-pressing and releasing the button turns off the welding current and gas outflow.

⭐ S4T - Special four-bar with hot start and final current

⭐ TIG WELDING WITH PULSE - consists in temporary impacts of a larger current, during which a drop of metal from the electrode wire is broken and moved to the weld. Electricity has once charakte

✅ ANTI STICK - short-circuit function - reduces the welding current to a minimum value when the welder makes a mistake and the electrode is glued to the welded material. This makes it easier to detach the electrode from the welded material and protects the electrode holder from damage.

✅ HOT START: facilitates the ignition of the electrode by providing more welding current with each arc.

✅ ARC FORCE: facilitates the transfer of a drop of molten electrode to the welded material, preventing the arc from being extinguished when the drop of electrode contacts the welding lake

✅ SPOT WELDING SPOT - with the possibility of setting the welding time at the point. A function that allows you to perform even, spot welds or spot welding of thin plates with other elements. This method is used, for example. in the production of chassis and car bodies, but also in the home workshop.

✅ CYCLIC SPOT WELDING - Pressing the MIG handle button causes the welding current to start. The welding current lasts as long as it is set in the Sptt position. Then the arc goes out and there is a stop break. The break time is adjustable and can be 0,1 ÷ 25,5 seconds. After the set Stop break time, the device will start welding again. The welding-break cycle, welding-break cycle... lasts as long as the MIG handle button is pressed.

✅ VRD - is a voltage reduction system whose task is to turn off the power supply within a few milliseconds after finishing welding. This function is also responsible for reducing the voltage on the wrapped electrode to a safe level.

✅ WIRE BURNING FUNCTION - BURN BACK - It is possible to adjust the time, through which the voltage at the output of the device still occurs after stopping the wire feeding. This function prevents the welding wire from getting stuck in the workpiece and prepares the end of the wire for the next arc ignition. Higher function values cause the wire to burn closer to the current tip.

➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖

TO MEET CUSTOMERS, BASED ON OUR MANY YEARS OF EXPERIENCE, WE HAVE CREATED PROFESSIONAL SETS FOR YOU, THANKS TO WHICH WE PROVIDE YOU WITH EQUIPMENT READY FOR USE IMMEDIATELY AFTER CONNECTING TO ELECTRICITY.

⌚ SAVE YOUR TIME ⌚ BUY INCLUDED AND WE WILL TAKE CARE OF THE REST!

JOIN THE BEST - START YOUR WELDING ADVENTURE WITH US!

➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖

• New 8L MIX or CO2 cylinder with 10-year legalization - 1 pc.
• Gas reducer Co2/Ar with 2 pressure gauges - 1 pc.
• Professional gloves - 1 pair
• Spray anti-chipping - 1 pc.
• Angle magnetic - 11 kg - 2 pcs.
• Welding wire 5 kg 0,8 mm- 1 pc.
• Welding wire AlMg 0,8mm - 0,45kg
• Welding wire AlSi 0,8mm - 0,45kg
• Welding wire 308LSi 0,8mm - 1kg
• Welding wire CuSi3 0,8mm - 1kg
• Tip current 0,8 mm - 5 pcs.
• Gas nozzle for handle - 2 pcs.
• Socket current - 2 pcs.
• Gas distributor - 2 pcs.
• Electrode pack - 1kg

+ SET IS TIG LIFT WELDING:

• TIG LIFT TIG-17V
• New 8L ARGON cylinder with 10-year legalization - 1 pc.
• Tungsten electrode TIG RED 1,6/2,0/2,4 mm - 3 pcs.
• Current switch SR 17/18/26 - 3 pcs. 1,6/2,0/2,4 mm
• Clamp sleeve SR 17/18/26 - 3 pcs. 1,6/2,0/2,4 mm
• Ceramic nozzle SR 17/18/26 - 3 pcs.
• Insulator - 1 pc.
• TIG cork - 2 pcs.
• Wire TIG 308 LSi 1,6mm - 0,5 kg
• Wire TIG 316 LSi 1,6mm - 0,5 kg
• Wire TIG ROD 1.6mm - 0,5 kg

THE SET INCLUDES:

Fits MMA welding machines, or any other one with a suitable connector.

Universal, robust welding torch / torch with valve TIG-17V-30 Type (WP-17-V or under another name SR17V) fits most welding equipment available on the market.

It gives the possibility of TIG welding (in argon shield), when connected to a regular MMA inverter welding machine (for buffer electrodes).

He is completely armed and ready to go. Ergonomic handle provides high comfort of work. The handle has a high-quality cover, protecting the wires from abrasion.

The MAGNUM MIG 240 DP LCD SYNERGY device has the ability to adjust additional, advanced parameters:

MMA

• WELDING CURRENT - Regulation in the range of 30 ÷ 180 A,
• ARC-FORCE - Regulation in the range 0 ÷ 100 %
• HOT START - CURRENT - Adjustment in the range of 20 ÷ 180 A
• HOT START - TIME - Adjustment in the range 0 ÷ 50 s
• ARC CHARACTERISTICS - Adjustment in the range of: general (constant current), for "difficult-weldable" electrodes including cellulose (constant power)
• VRD - On/Off

TIG LIFT / TIG LIFT PULSE

• WELDING CURRENT - Regulation in the range of 30÷ 180 A
• PULSE FREQUENCY - Adjustable in the range of 0.1 ÷ 99 Hz
• PULSE BALANCE - Regulation in the range of 5 ÷ 95 %
• PEAK CURRENT (Amplitude) - Regulation in the range of 1 ÷ 500 %

MIG/MAG

• Wire burning time - correction of wire burning height. Adjustment in the range: -50 ÷ 50 [%].
• Pulse frequency - regulation of pulsation frequency. Adjustment range: 0,5 ÷ 5,0 [Hz].
• Pulse width - pulsation balance. Adjustment range: 20 ÷ 80 [%]. The 50% setting is the balance (middle) setting.
• Pulse height - regulation of current amplitude. Adjustment range: 5 ÷ 50 [%].
• Top current - correction of peak current voltage. Adjustment range: -50 ÷ 50 [%].
• Base current - correction of base current voltage. Adjustment range: -50 ÷ 50 [%].
• Free wire extension - adjustment of the initial speed of the wire (access). Adjustment range: 1,0 mm to 15 m. The duration of the access speed is 4 seconds.
• Gas outflow before welding - regulation of gas outflow time before welding. Adjustment range: 0 ÷ 10 [s].
• Gas flow after welding - regulation of gas outflow time after welding. Adjustment range: 0,1 ÷ 50 [s].
• Final current - regulation of the final current when welding with S2T and S4T functions. Regulation range 24 ÷ 200 [%].
• Initial current - adjustment of the initial current (hot start) when welding with S2T and S4T functions. Regulation range 24 ÷ 200 [%].
• Current build-up time - adjustment of the duration of the initial current (hot start) when welding with S2T function. Adjustment range 0 ÷ 50 [s].
• Current drop time - adjustment of the duration of the final current when welding with S2T function. Adjustment range 0 ÷ 50 [s].
• Final voltage - correction of final current voltage during welding with S2T and S4T function. Adjustment range: -50 ÷ 50 [%].
• Initial voltage - correction of the initial current voltage during welding with S2T and S4T functions. Adjustment range: -50 ÷ 50 [%].
• Duration of spot welding - adjustment of welding time at the point for spot welding. Adjustment range: 0,1 ÷ 9,9 [s].

EFFICIENT OPERATION THANKS TO PROFESSIONAL WIRE FEEDER

The welder is equipped with a professional wire feeder, which guarantees stability and continuity of operation of the device.

The 4-roll feeder allows precise extension of the welding wire excluding its slippage.

The feeder has a quick wire change knob as well as a wire feed roller.

The set includes rollers:

• For steel wire 0,8-1,0mm V - 2 pcs.
• For aluminium wire 1,0-1,2mm U- 2 pcs.

HANDLE WITH EURO CONNECTOR

The welder has a EURO socket for MIG welding wire. The socket allows you to quickly change the handle to the same standard and, most importantly, allows you to change the polarity for welding with FLUX self-shielding wire.

The warranty service is carried out in the door-to-door system without transport costs on the part of the user.

The power source was built on the basis of IGBT transistors

(Insulated Gate Bipolar Transistor), which provide a minimum of electromagnetic interference, small power losses in basic systems, allowing to increase the efficiency and reliability of the power source. Very high efficiency, which translates directly into lower energy consumption, and high switching frequency, ensure rapid adjustment of the current to changes in parameters during welding.

TECHNICAL DATA:

MIG/MAG WELDING PARAMETERS:

• MIG/MAG welding current: 30 - 200 A
• MIG/MAG welding voltage: 16,5 - 24 V

TIG LIFT/MMA WELDING PARAMETERS:

• MMA welding current: 30 - 180 A
• Idle Voltage: 56V

TECHNICAL DATA:

• Power supply: AC 230 V, 50 Hz,
• Protection required: 25 A class C
• Efficiency: 60%
• Wire spool weight: max: 5 kg
• Wire diameter: 0,8/1,0/1,2 mm
• Housing protection class: IP21S
• Weight: 16,4 kg

ADDITIONAL FUNCTIONS:

• Function 2/4 BAR: Yes
• S2T/S4T function: Yes
• SPOT function: Yes
• Tig LIFT: Yes
• Tig LIFT with pulse: Yes
• Post Gas: Yes
• Pre Gas: Yes
• Welding Point: Yes
• Welding Point cyclic: Yes
• Pulse: Yes
• Double Pulse: Yes
• Lutowelding: Yes
• ARC FORCE: Yes
• HOT START: Yes
• VRD: Yes
• BURN BACK: Yes
• SYNERGY: Yes
• MEMORY: Yes

WHEN YOU BUY FROM US, YOU GET:

• WELDING MACHINE MAGNUM MIG 240 LCD DUAL PULSE SYNERGY
• WELDING TORCH MIG/MAG MB24 - 3 m
• MMA ELECTRODE HOLDER- 1 pc.
• BULK HOLDER - 1 pc.
• ALUMINIUM WIRE INSERT - 1 pc.
• REFILL FOR STEEL WIRE - 1 pc.
• CURRENT TIP - 6 pcs.
• ROLL FOR STEEL WIRE 0,8/1,0mm - 2 pcs.
• ROLL FOR ALUMINIUM WIRE 1,0/1,2 - 2 pcs.
• CLAMP BAND - 2 pcs.
• GAS HOSE - 1 pc.
• USER MANUAL in Polish
• WARRANTY CARD

+ MIG/MAG WELDING KIT:

• New 8L MIX or CO2 cylinder with 10-year legalization - 1 pc.
• Gas reducer Co2/Ar with 2 pressure gauges - 1pc.
• Professional gloves welding - 1pair
• Welding wire 5 kg 0,8 mm- 1 pc.
• Welding wire AlMg 0,8mm - 0,45kg
• Welding wire AlSi 0,8mm - 0,45kg
• Welding wire 308LSi 0,8mm - 1kg
• Welding wire CuSi3 0,8mm - 1kg
• Spray anti-chipping - 1 pc.
• Angle magnetic - 11 kg - 2pcs.
• Tip current - 5 pcs.
• Gas nozzle for handle - 2 pcs.
• Socket current - 2 pcs.
• Gas distributor - 2 pcs.
• Electrode pack - 1kg (2.5 or 3.2mm to choose from)

+ SET IS TIG LIFT WELDING:

• TIG LIFT torch TIG-17V-35 - 1 pc.
• New 8L ARGON cylinder with 10-year legalization - 1 pc.
• Tungsten electrode TIG RED 1,6/2,0/2,4 mm - 3 pcs.
• Current switch SR 17/18/26 - 3 pcs. 1,6/2,0/2,4 mm
• Clamp sleeve SR 17/18/26 - 3 pcs. 1,6/2,0/2,4 mm
• Ceramic nozzle SR 17/18/26 - 3 pcs.
• Isolator - 1 pc.
• TIG cork - 2pcs.
• TIG wire 308 LSi 1,6mm - 0,5 kg
• TIG wire 316 LSi 1,6mm - 0,5 kg
• TIG ROD wire 1.6mm - 0,5 kg

Specifications