Metināšanas aparāts MIG/TIG/FCAW 200A 230V Spartus EasyMIG 210

Trumpai apie prekę

Prekė: Suvirinimo aparatas MIG/TIG/FCAW 200A 230V Spartus EasyMIG 210. Kategorija: Inverteriniai suvirinimo aparatai.

• Gamintojas: Spartus
• Modelis: EASYMIG210LED-PAK-15-3_pakiet1

Standard equipment:

• SPARTUS® EasyMIG 210 LED welding machine
• MIG welding torch SPARTUS® Easy 150 / 3 m (MB-15)
• electrode holder
• mass cable
• feeder rollers type A fi 0,8/1,0 mm V for steel (mounted in the feeder)
• gas hose
• instruction manual in Polish

Accessories package:

• self-shielding welding wire FLUX fi 0,8 mm / 0,9 kg
• anti-chipping preparation 400 ml
• MIG welding gloves / 1 pair
• gas nozzle / 2 pcs.
• current tip fi 0,8 mm / 5 pcs.
• rutile welding electrodes / 1,0 kg

Spartus® EasyMIG 210 LED is a small semi-automatic welding machine, constructed on the basis of IGBT transistors. It enables welding with a hot melt electrode in an inert and active gas shield (MIG/MAG), welding with a wrapped electrode (MMA) and welding with TIG Lift with arc ignition by rubbing.

In addition, the device, thanks to the ability to change the polarity of welding, allows welding with self-shielding wire without gas.

The maximum welding current for MIG/MAG/TIG methods is 200 A, and for MMA method – 160 A. For use, power supply from the single-phase 230 V network is sufficient.

EasyMIG 210 LED is equipped with a simple synergistic system for MIG/MAG welding with steel wires with a diameter of 0,6 / 0,8 / 1,0 mm with the possibility of manual parameter correction.

Built-in, two-roll feeder ensures stable feeding of welding wire.

A small spool significantly relieves the machine, which is an undoubted advantage during transport.

The device is characterized by simplicity, which will certainly be appreciated by novice welders.

Thanks to its light weight and compact design, it is perfect as a portable semi-automatic welding machine.

Any field renovation work is an ideal task for this machine, and the simple and intuitive LED display allows for easy management of welding machine parameters.

Description of control panel

• A1. Display of parameters
• A2. Welding Method Selection Button: MIG/MAG / TIG Lift / MMA
• A3. Welding mode selection button: 2T/4T/VRD
• A4. CO2 gas selection button / MIX / without gas
• A5. Parameter selection button: MIG/MAG – inductance, MMA – Hot Start, Arc Force
• A6. Wire diameter selection button 0.6 / 0.8 / 1.0
• A7. Parameter adjustment knob: voltage / current and voltage / wire feed speed / inductance / Hot Start / Arc Force
• A8. Gas Outflow Test Button
• A9. Wire extension test button

Functions supporting the welding process for MIG/MAG methods:

• inductance – control of the face width and depth of melting, limits the number of welding chips;
• possibility of welding in two modes - 2T/4T;
• manual mode - the device also works in manual mode, which allows you to set all welding parameters according to the individual requirements of the user;
• polarity change - external welding polarity change allows welding with self-shielding wires without gas.

Functions supporting the MMA welding process (wrapped electrode):

• Hot Start – so-called. hot start - facilitated glowing of the electrode;
• Arc Force – arc dynamics adjustment – facilitated welding in forced positions;
• VRD – reduced idle voltage, increased operational safety.

Technical parameters

• Power supply voltage: ~1× 230 V ± 10% 50 / 60 Hz
• MIG welding current: 50 - 200 A
• MIG duty cycle: 60%
• Output voltage: 16.5 - 24 V
• Type of feeder: built-in, 2-roller
• Wire feed speed: 2 - 12.5 m/min.
• Wire spool: ≤ 5 kg / ∅200 mm
• Wire diameter: 0.6 / 0.8 / 1.0 mm
• Synergy: yes
• Working mode 2T/4T: yes
• Arc Force: yes
• Hot Start: yes
• VRD: yes
• Power consumption: MIG 39 / TIG 29 / MMA 34
• Power factor (cosφ): 0.73
• Efficiency η: 77%
• Isolation class: H
• Degree of protection: IP21S
• Weight: 10 kg
• Dimensions: 470 x 190 x 330 mm

Specifications