Suvirinimo aparatas MIGOMAT 200A 230V, MIG/MAG/MMA/FLUX, IGBT

Trumpai apie prekę

Prekė: Suvirinimo aparatas MIGOMAT 200A 230V, MIG/MAG/MMA/FLUX, IGBT. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Weldman
• Modelis: MICRO MIG 200
• Ilgis: 68 mm
• Plotis: 32 mm
• Aukštis: 48 mm

| Producer: Weldman | Welding methods: MIG/MAG, MMA, FLUX | IGBT | Power supply: 230 V | Welding current: 200 A | Set |

Standard equipment

• Welding machine Weldman Micro MIG 200
• welding torch fixed MB-15 2,7 m
• mass cable 2 m with mass clamp 300 A (DX25)
• cable 2,5 m with electrode holder 200 A (DX25)
• 2 m power cord with plug
• transport wheels
• welding mask
• welding brush

Weldman Micro MIG 200 is a welding machine based on IGBT technology designed for welding using the following methods: MIG/MAG, FLUX, MMA (carbon, stainless steel, alloy steel, cast iron and aluminum).

The welding machine is designed for welding carbon steel, stainless, alloy, cast iron and aluminium using the following methods:

• MIG/MAG
• FLUX
• MMA

Setting other parameters of the device is done using the control panel, on which displays and control knobs are placed.

This solution allows easy and quick setting and reading of all welding parameters.

The welding current will be shown on the display when the welding begins (arching). This parameter cannot be set before welding.

Inside the welding machine there is a wire feeder, which allows you to attach a spool up to 5 kg. Next to the wire feeder there are sockets for changing the polarity of the handles, which must be replaced in the case of welding without a gas shield (FLUX).

The power source was built on IGBT transistors providing a minimum of electromagnetic interference, enabling increase in efficiency and reliability of the power source, lower energy consumption, and rapid adjustment of the current to changes in parameters over time

The welder is designed for semi-professional users.

• Characteristics: Automatic retry of the number welding current [A]: 200
• Welding current range [A]: MIG/MAG: 20 A - 200 A; MMA: 40 A - 200 A
• Current [A] / duty cycle [%]: 170 A / 60%; 130 A / 100%
• Security [A]: 20
• Power supply [V]: 230
• Degree of protection: IP21
• Idle voltage [V]: 56

easy emptying of the container, the possibility of loading the product hung on the wall

• Type of wire feeder: internal 2 roller
• Wire spool: 5,00 kg / D200
• Cooling: with gas
• Current adjustment: Smooth
• Processes: MIG / MMA
• Additional features: FLUX (gas-free welding)

Physical parameters

• Weight: 19,00 kg
• Height: 480 mm
• Width: 320 mm
• Length: 680 mm

✴ wide application (hobby, workshop, flashing, etc. )

✴ solid chassis

✴ gas cylinder shelf

✴ easy and intuitive to use control panel

✴ range of electrode diameters from 1,6 to 4,0 mm

✴ welding without gas with self-shielding wire

✴ MIG/MAG, MMA, FLUX welding

✴ rich standard equipment

✴ advanced IGBT technology

✴ high duty cycle

✴ supported wire spools: D100 - 1,0 kg / D200 - 5,0 kg

Specifications