Suvirinimo aparatas Sherman DIGIMIG 200 MTM TIG

Trumpai apie prekę

Prekė: Suvirinimo aparatas Sherman DIGIMIG 200 MTM TIG. Kategorija: Inverteriniai suvirinimo aparatai.

• Gamintojas: Sherman
• Modelis: DIGIMIG 200 MTM

SHERMAN DIGIMIG 200 MTM

| Brand: SHERMAN | Welding methods: MIG ,MMA, TIG DC HF, TIG DC HF PULS | Power supply: 230V | Welding current: 200A | Efficiency: 60%

STANDARD EQUIPMENT

• Sherman DIGIMIG 200 MTM
• Welding torch T-17/4m
• Welding torch TW-15/3m
• Electrode cable
• Bulk cable

Other accessories needed for full operation of the welding machine such as:

• gas cylinder,
• reducer,
• welding wires,
• visor,
• gloves,
• Welding torch spare parts

You can find us at other auctions or a welding machine in a set with the given accessories.

The DIGIMIG 200 MTM synergistic welding machine is a device for manual welding of steel and non-ferrous metals using MIG/MAG, MMA (wrapped electrode) and TIG HF methods.

The device is aimed at professionals who value high quality and reliability. It can also be used for lutowelding of thin (up to 3 mm) galvanized sheets.

Digital control allows full adjustment of parameters, arc dynamics, characteristics and manual or synergistic mode of operation in the MIG/MAG method.

The use of synergistic settings in the welding machine for ordinary steel, stainless steel and aluminum alloys significantly simplifies its operation and allows for use by people with less experience and hobbyists.

When welding with MMA:, HOT START, ARC FORCE functions can be adjusted and VRD can be turned off.

The welder allows the use of several operating modes including the option of point welding.

The device has the memory of the last setting, i.e. after turning it off and re-enabling it, the last set parameters are restored.

It is also possible to remember 10 sets of settings with easy access to the program's save/playback mode.

TECHNICAL DATA:

• Power supply voltage: 230V 50Hz
• Maximum power consumption: 7,4 kVA
• Voltage without load: 65 V
• Nominal welding current / MIG duty cycle: 200A / 60%; MMA: 180A / 60%; TIG: 200A / 60%
• MIG welding current adjustment range: 30 – 200 A; MMA: 20 – 180 A; TIG: 10 – 200 A
• Welding voltage regulation range (MIG): 15,5 – 24 V
• Welding voltage correction: -20 – +20 %
• Inductance: 0 -10
• Gas flow: 0 – 3 s
• Gas flow: 0 – 9,9 s
• Power build-up: 0 – 9,9 s
• Power drop: 0 – 9,9 s
• Crater current: 10 – 200 A
• Pulse frequency: 0,2 – 99 Hz
• Pulse width: 10 – 90 %
• Wire burning: 0 – 1 s
• TIG spot welding time: 0,01- 5 s; MIG 0,5 – 5 s
• SPOT TIG welding break time: 0,1- 5 s; MIG 0,5 – 5 s
• ARC FORCE (MMA) adjustment range: 0 – 100 A
• Scope of HOT START adjustment (MMA): 0 – 100 A
• Mass [kg]: 11,5
• Dimensions (D x SZ x W) [mm]: 420 x 200 x 375

IGBT TECHNOLOGY

Modern technology based on bipolar transistors with an isolated gate. It combines the ease of control of field transistors with high breakdown voltage and the speed of switching bipolar transistors. The use of IGBT technology has an impact on significantly extending the reliable operation of welding equipment.

DEGREE OF PROTECTION

IP determines the extent to which a device is resistant to the ingress of solid and water contaminants. IP23S means that the device is adapted to work indoors and outdoors.

PROTECTION AGAINST OVERHEATING

The IGBT module is protected from overheating by a protective installation that turns off the welding circuit of the device. After a few minutes, the welding machine is cooled to a temperature allowing it to be switched on again.

WORK CYCLE

The work cycle is based on a 10-minute period. The 60% duty cycle means that a 4-minute break is required after 6 minutes of operation of the device. The 100% duty cycle means that the device can work continuously, without interruptions.

MMA

A method in which a wrapped electrode is used, consisting of a metal core covered with a sheath. The device allows welding with all types of electrodes.

ARC FORCE

Increasing or decreasing the length of the welding arc depending on the distance of the electrode from the material being welded. Allows you to adjust the dynamics of the welding arc. Shortening the arc length is accompanied by an increase in welding current, which results in stabilisation of the arc.

HOT START

The function is designed to prevent sticking the electrode to the material and is a great convenience when arcing. It works at the moment of arcing, causing a temporary increase in the welding current above the value set by the welder.

VRD

The VRD function reduces the voltage in the unloaded state. The correct voltage value is restored only just before the arc is ignited. This minimizes the risk of electric shock, but in some cases it can make it difficult to light the arc.

POLARITY CHANGE - WELDING WITHOUT GAS

Thanks to the variable polarity, it is possible to weld using the FLUX method with powder wire without shielding gas. The wire is filled with flux producing protective gases during welding.

SYNERGY

MIG/MAG welding using synergistic settings. The device selects welding parameters depending on the selected type and thickness of the material.

These parameters can be changed by the user to adjust the settings to suit their needs. Many programs have been prepared for synergistic welding.

2 ROLLER WIRE FEEDER

Professional feeder made of die-cast aluminum, has a strong motor, which allows for stable wire feeding without jamming. It is equipped with 2 drive rollers.

2T/4T

2T - Pressing the welding torch button will cause the gas to pre-flow, then ignite the arc and start welding. When the button is released, the arc will be extinguished and the gas will flow out.

4T - Pressing and releasing the welding torch button will cause the gas to pre-flow, then the arc to glow and start welding. After pressing and releasing the button again, the arc will be extinguished and the gas will flow out.

REGULATION OF INDUCTANCE

It allows you to optimize arch characteristics depending on the thickness of the welded element and the welding method and conditions. The function is useful during welding using the MIG/MAG method of thin elements, preventing them from burning out and soldering galvanized elements.

SOLDERING

After selecting the type of CuSi wire, the device enables soldering, mainly used in the automotive industry to connect galvanized sheets.

SPOT WELDING SPOT

Time welding function, used to attach details, thanks to which an equal length of welding welds can be obtained.

WIRE BURNING TIME

It is possible to adjust the time, through which the voltage at the output of the device still occurs after stopping the wire feeding. This feature prevents the welding wire from getting stuck in the welded material and prepares the end of the wire for the next arc. Higher function values cause the wire to burn closer to the current tip.

INCH

To turn on the quick extension of the wire, press the button in the handle of the handle for a minimum of 3 seconds without arcing. Release of the button will stop the wire feeder.

TIG DC

Allows TIG welding with DC current. This is required for welding non-ferrous metals.

TIG PULSE

The function affects the shape of the weld and the focus of the arc. Pulse welding also reduces the amount of heat supplied to the material and is applicable when welding thin materials.

HF - NON-CONTACT ARC IGNITION

The device is equipped with a ionizer enabling contactless arcing.

TIME OF PRE-EXHAUST GAS

Time from pressing the button in the handle and opening the gas valve to the moment the arc ignites. Usually, it should be longer than 0,5 s to deliver shielding gas to the nozzle outlet of the burner to cover the welding start site and tungsten electrode.

GAS OUTFLOW TIME

Time from arc extinction to closing the gas valve to shield the solidifying welding lake from air and to cool the tungsten electrode. Too short outflow time can result in oxidation of the weld. When welding in TIG AC mode (alternating current), this time should be longer.

TIME OF ELECTRICITY BUILD-UP

The time of current build-up of welding from the initial current to the set value of the welding current.

TIME OF CURRENT DROP

Welding current drop time from set to zero or crater current value.

PULSE FREQUENCY

Frequency with which the value of the current pulse changes between the welding current and the base current.

PULSE WIDTH

Pulse duration, allows you to adjust the depth of melting. The increase in width increases the depth of melting, reducing the amount of heat introduced into the material, reducing the risk of burning thinner sheets or smaller elements.

CRATER CURRENT

The current used in some welding modes, when the arc is not extinguished immediately after the phase of falling welding current. It allows you to fill the crater and the end of the weld.

EASY-TO-USE, EASY-TO-READ CONTROL PANEL:

Easy to use control panel allows precise and smooth adjustment of parameters. Digital display indicates the actual current during welding. The semi-automatic welding machine has a menu that facilitates operation and allows you to choose the type of welded material.

STRONG AND ROBUST CONSTRUCTION

The housing of the device is made of light and durable composites, resistant to all kinds of mechanical damage.

EASY TRANSPORT

Equipping the welding machine with a transport handle for convenience when changing jobs.

COOLING

The device has a cooling system with a fan which significantly increases its efficiency.

Specifications