Suvirinimo aparatas SPARTUS EASYMIG 270, 400V, 250A, MMA, TIG Lift, FLUX, 2T/4T, sinerginis

Trumpai apie prekę

Prekė: Suvirinimo aparatas SPARTUS EASYMIG 270, 400V, 250A, MMA, TIG Lift, FLUX, 2T/4T, sinerginis. Kategorija: Pusiau automatiniai suvirinimo aparatai.

• Gamintojas: Spartus
• Modelis: EASY MIG 270
• Ilgis: 920 mm
• Plotis: 470 mm
• Aukštis: 740 mm

• Welding methods: MIG/MAG, MMA, TIG LIFT, SYNERGY, FLUX
• Power supply: 400V
• Operating cycle 60% at maximum welding current 250A
• SYNERGY in MIG/MAG method - automatic selection of parameters with the possibility of manual correction
• Synergistic programs: CO₂ steel, steel compound, powder wire welding
• Smooth adjustment of welding parameters, inductance
• Professional, 4-roll wire feeder
• Modes and functions: 2T/4T mode, HOT START, ARC FORCE, VRD, wire test
• Clean, aesthetic welds
• Made in IGBT technology

✔ FEATURES AND ADVANTAGES:

• INDUCTION ADJUSTMENT - introduces less heat, which prevents sheet metal deformation and damage to the zinc layer,

• TIG LIFT - arc glow by rubbing the electrode against the material; used in places where there is a risk of interference of electronics by high frequency current; welds are of high quality,

• FLUX - arc welding with powder wire without the use of a gas cylinder; self-shielding wire is filled with flux or a chemical that generates protective gases,

• 2 TAKT - welding begins after pressing and ends after releasing the button,

• 4 TAKT - welding begins after the first press and release of the button, and ends after pressing again, which is more convenient for longer welds,

• HOT START - a temporary increase in welding current during arcing; prevents "sticking of the electrode", facilitates the start of welding,

• ARC FORCE - adjustment of welding arc dynamics, allowing to adjust the depth of melting,

• VRD - reduces the voltage on the electrode to a safe level after welding,

• IGBT - bipolar transistors increase the efficiency and reliability of the device and ensure lower power consumption.

⚙ TECHNICAL SPECIFICATION:

• Power Supply: 400V 50/60Hz (3ph)
• Output voltage: 16.5 - 26.5V
• Welding current: MIG: 50 - 250A | TIG: 10 - 250A | MMA: 10 - 220A
• Power consumption: 13A
• Power factor: 0.93cosφ
• Efficiency η: 85%
• Wire feed speed: 2 - 15m/min
• Wire diameter: 0.8 / 1.0 / 1.2 mm
• Spool with wire: 200, 300 mm; up to 15kg
• Degree of protection: IP21 F
• Dimensions: 92 x 47 x 74 cm
• Weight: 38kg

THE SET INCLUDES:

• Welding machine SPARTUS EASY MIG 270,
• Welding torch SPARTUS EASY 240 - 3m,
• mass handle,
• electrode handle,
• Roller for wire feeder 0.8 - 1.0V fi30 - 2pcs ,
• Roller for wire feeder 1.0 - 1.2V fi30 - 2pcs ,
• Gas connection hose - 1pcs ,
• User manual and warranty card.

Specifications