Trumpųjų bangų antenos derintuvas ATU-130, 1.8–50 MHz, 200 W, OLED

Trumpai apie prekę

Prekė: Trumpųjų bangų antenos derintuvas ATU-130, 1.8–50 MHz, 200 W, OLED. Kategorija: Tiuneriai.

• Gamintojas: no brand
• Modelis: ATU-130

⭐Feature:

⏺ANTENNA TUNER: Miniature automatic shortwave antenna tuner, without control line support, suitable for most radio stations.

⏺EXCELLENT PARTS: Adopts C 1000V channel high voltage SMD capacitor, advanced PIC chip and UHF connector to ensure stable performance.

⏺GOOD PERFORMANCE: Higher capacity, larger magnetic ring, thicker wire diameter, higher load capacity, total inductance of 12,4 uh.

⏺ALUMINUM ALLOY: The antenna tuner housing is made of aluminum alloy, with light weight, fast heat dissipation and corrosion resistance.

⏺COMPACT SIZE: The automatic antenna tuner has a compact design, convenient connection, portable design is suitable for home or vehicle use.

⭐Specification:

• Item Type: Automatic Antenna Tuner
• Model: ATU-130
• Material: Aluminum Alloy
• Supply voltage range: 10-15VDC (+ in the middle)
• Maximum current consumption: 500mA
• Maximum working power: 150W
• Start tuning Minimum power: 5 W
• Minimum measurable power: 0,1 W
• Measurement accuracy Up to 10W Power: 0,1W
• Measurement accuracy greater than 10W Power: 1W
• Maximum installed inductance: 8,53 μH
• Minimum installation inductance: 0,05 μH
• Features of Microautomatic Antenna Tuner:
• It has the function of standing wave meter power meter (according to BYPASS, straight mode, one horizontal line in the center of the screen, the test value is approximate, and the accuracy is lower than that of professional high accuracy meter, for reference).
• PIC18F2520, MCU (faster).
• Automatic antenna tuner on short waves
• The third edition uses the design of 4 large magnetic induction coils, which generate less heat than the original version.
• HF32, 10A, HF33, 5A relays are used.
• A high-voltage porcelain capacitor was used.
• The maximum measurable value is SSB 275w. It is recommended that the SSB does not exceed 200 W for a long time.
• For other continuous modes, the power should not exceed 100W (FT8, CW, FM, when the standing wave deviation is large before adjustment, the power should be reduced accordingly and it is recommended to use a 10-minute interval for 5 minutes).
• Size: approx. 38 x 88 x 155 mm / 1,5 x 3,5 x 6,1 inches (without projections)
• Weight: approx. 0,5kg/17,6oz (portable, suitable for vehicle, indoor and outdoor mounting, etc. )
• 1,8-50 MHz (especially depends on antenna length and standing wave deviation).
• Tuning Impedance Range: 5Ω-1,2KΩ
• Application: It can be used for long lines (recommended), GP (recommended), reverse V, bipolar, end powered and other antennas to adjust standing wave and adjust short wave machine impedance.

⭐List of packages:

• 1 x Antenna Tuner
• 1 x Cable
• 1 x Accessories

1. Connect the power cord Power adapter 11‑14VDC.
2. Connect the walkie-talkie to the IN RF line of the automatic antenna tuner.
3. Connect the ground wire.4
4. . The antenna is connected to the antenna (M socket or fast socket), AM, FM, CW, low power 5-15W and can be well tuned (in the swr1.5 range) to use high power.
5. If you have to do it manually, you can press the car and the dot in the middle of the LC screen will disappear, which means manual mode. Press again to go to automatic mode.
6. In special cases, press tune to reset and LC combination to reset.

Specifications