Valdymo pultas STB230VM2 viengaliams ir dvigaliams vartams

Trumpai apie prekę

Prekė: Valdymo pultas STB230VM2 viengaliams ir dvigaliams vartams. Kategorija: Išoriniai moduliai.

• Gamintojas: Elmes
• Modelis: STB230VM2 Sterownik do bramy JEDNO/DWU

STB230VM2 – gate controller with ONE or TWO motors per 230V AC.

Attention! - the controller is also available in various hardware and dot configurations. usage

different types of ELMES remote controls, signal lamps, photocells and off. extremes.

Cooperation ONLY with prod pilots. ELMES and selected models of prod pilots. PROXIMA dedicated for ELMES devices.

In other auctions there are sealed plastic housings for controllers.

The auction concerns:

CONTROLLER FOR SINGLE AND DOUBLE LEAF GATES 230VAC WITH ADJUSTABLE POWER.

New version of driver software (ver. 05) available from 12.2020 has been enriched with new features:

• working time programmed independently for both wings;
• delay in opening the first wing and closing the second;
• release at the end of the gate movement;

The device is designed to automate the opening and closing of entrance gates

single or double-leaf motor(s) with alternating current 230V AC motor(s) used

enabling work in two directions.

It is characterized by the following functions:

- cooperation with up to 448 pilots with variable code KEELOQ, produced by Elmes Elektronik;

- independent force adjustment for both gate wings;

- control of one or two remote control buttons or a single wired switch;

- operating modes: manual, with self-closing, two modes of the "parking" type;

- gate function (opening one wing);

- cooperation with NO or NC type limit switches (normally open or normally compact);

- cooperation with NC photocell (normally compact);

- automatic opening of the gate after violation of the photocell during closing;

- STOP safety entrance blocking the movement of the gate in both directions;

- output to a warning (pulsing) or lighting lamp;

- additional relay output OUT2 type NO/NC,

for controlling the electrolock or controlled by a separate remote control button.

Technical data:

- power supply: 230VAC; power consumption: maximum 6VA, resting (without photocell): 2,5VA,

- maximum power of wing motors: 500W + 500W;

- OUT1 output per lamp: currentless, NO, galvanically separated; load capacity: 16A/250VAC,

- switching time: from 1s to 999s;

- OUT2 output: NO or NC type - jumper switching, currentless, galvanically separated;

- load capacity: 1A/240VAC/30VDC; switching time in monostable mode: from 0,5s to 127s or bistable mode,

- photocell power output: 24VDC, maximum 150mA, protected by a fuse,

- entry to the NC type photocell (normally compact),

- NC type STOP safety input (normally compact),

- inputs for limit switches of type NC (normally compact) or NO (normally open),

- engine running time: from 1s to 255s, common for closing and opening,

- PAUSE time: from 1s to 255s,

- superheterodyne receiver for the 433,92MHz band,

- operating temperature range: -20 st.C to +50 st.C,

- dimensions (length /lat. /height ): 165/90/45 mm.

- spacing of 4 mounting holes ø=3mm: 153 x 75 mm.

Specifications