Vandens filtras AquaFloow, montuojamas po kriaukle, filtrų sistemai

Trumpai apie prekę

Prekė: Vandens filtras AquaFloow, montuojamas po kriaukle, filtrų sistemai. Kategorija: Kranų ir po kriaukle montuojami filtrai.

• Gamintojas: AquaFloow
• Modelis: Hydration Tap

Filter for under-sink filter system Aquafloow

The filter for the Aquafloow undersink filter system reduces the taste of chlorine and unwanted components that enter the water during the flow of the water supply network. Filter life 6 months depending on water quality or 30 000 liters. The product does not reduce water TDS.

Product Specifications:

⭐ Dimensions: 4,5” x 13.7”

⭐ Micron speed: 1-5 μm

⭐ Operating temperature: 38°C-100°C

⭐ Operating pressure: 30-125 PSI

⭐ Flow rate: 3,5 to 5 l/min.

⭐ Degree of chlorine reduction: 99%

⭐ Lifespan: 6 months or 30 000 litres

‼ IMPORTANT‼

The filter fits the previous model of the AquaFloow Hydration Tap filter system.

Does not fit the new AquaFloow Tap One and Tap Trio models.

Right out of the tap!

The under-sink water filter for the Aquafloow filter system reduces the unpleasant taste of chlorine by up to 99%. Clean water straight from the tap stimulates more frequent drinking, which supports proper hydration of the body.

Better water quality affects the taste of prepared food and drinks, which is useful in extreme conditions in motorhomes! The filter for the under-sink system is also a solution for allergies and irritations associated with long-term consumption of chlorinated water.

How much is enough and what does it remove?

The filter life is 6-12 months or 30 000 liters depending on the water quality. The powerful filter allows you to handle large amounts of water without having to replace it frequently, which is a cost-effective solution. By reducing the frequency of purchases of new filters, you will save time and money and will not have to constantly monitor the state of filter consumption.

The filter effectively removes:

⭐ chlorine

⭐ pollution

⭐ dirt

⭐ rust

⭐ sand

⭐ unpleasant taste and smell of water

The most important features

✅ Long service life: 6-12 months, depending on water quality or 30 000 liters

✅ Effective filtration: contains a block of activated carbon from coconut, effectively reduces chlorine, heavy metals, chemicals, sediments and other large molecules

✅ Safe materials in composition: specially selected materials without BPA and lead

✅ Easy installation: assembly takes less than 3 minutes, Lock & Unlock design

✅ Versatility: the product does not reduce TDS (total dissolved solids); a reverse osmosis system is recommended to reduce TDS

At home, traveling, or commercially?

The Aquafloow undersink system filter is a product that you can install in your home, RV, office or other commercial places. Offer your customers access to clean water and increase the standard of services offered.

BPA-free

The water filter system under the sink is suitable for all household members, including children and people with allergies. Safety of use is guaranteed by the absence of harmful substances in the composition. You can be sure that the water straight from the tap is safe for the whole family!

Quick case

Quick and easy filter installation in less than 3 minutes! Lock & Unlock design! Assembly does not require advanced technical knowledge. With the ability to install yourself without having to hire a professional, you can save money and impress with your skills!

Lock & Unlock filter installation

1 Remove the new filter from the package and remove all protections.

2 Enter the filter into the filter system hole.

3 Turn the filter to the right until you hear a characteristic click, which means that the filter is correctly mounted.

4 Unscrew the water and check for leaks. Watch for a few minutes. If you notice leaks, turn off the water and check again carefully if the filter is properly installed and protected.

5 After installing a new filter, rinse the system by opening the faucet and allowing water to flow through the filter for about 5 minutes.

Installation instructions for the entire filtering system

1 Glue the auxiliary label before drilling.

Note: Install a water filter at least 5 cm from the bottom of the cabinet to make it easier to replace the filter.

2 Mount the screws and hang the filtration system on the screws.

3 Connect the supply and discharge hose to the filter head.

4 Disconnect the cold water supply.

5 Unscrew the faucet to lower the water pressure.

6 Connect the supply hose to the cold water valve. If the angle valve output is 3/8 inch, you can directly connect it to the water supply. If necessary, use Teflon tape.

7 If the angle valve has a 1/2 inch output, connect it with a 3/8 inch to 1/2 inch converter.

8 Connect the outlet hose (1/2 inch) to the faucet hose.

9 First, unscrew the tap with water, then turn the water shut-off valve back on. Rinse the filter for 5 minutes.

1 0 After rinsing the new filter, turn off the faucet and carefully inspect the new installation system for any leaks.

Recommendations for safe use

1 If the water pressure exceeds 80 psi (552 kPa), a pressure limiting valve should be installed.

2 If a backflow prevention device is installed in the water system, a pressure control device shall be installed as a result of thermal expansion.

3 Do not use with microbiologically hazardous or unknown quality water without proper disinfection.

Specifications