Vandens minkštinimo filtras HYDRO PLUS 32, lenkiška gamyba

Trumpai apie prekę

Prekė: Vandens minkštinimo filtras HYDRO PLUS 32, lenkiška gamyba. Kategorija: Filtrai ir vandens minkštikliai.

• Gamintojas: Hydro
• Modelis: Hydro Plus 32
• Talpa: 32 l

⭐⭐⭐⭐⭐

LARGE WATER SOFTENER HYDRO PLUS 32 PREMIUM MONOSPHERE STATION

⭐⭐⭐⭐⭐

Hydro Plus is the professional line of water softeners and filters from Technika Wody. They are manufactured in Poland according to a strictly defined specification that we are truly proud of. It is located on the control head.

Very long warranty periods: 5 years for the head/electronics, 8 years for the resin bed, and 10 years for the housing and pressure tank!

The devices feature special monosperic resin (from renowned American manufacturer Dow or German Lewatit S1567 produced without solvents by Bayer) and a modern, fully automatic control head with a menu in Polish and a low salt level alarm.

All solutions offered in Hydro Plus softeners have been tested many times and hold certifications from the most important hygiene and industry organizations. Durability, efficiency, safety, and savings – these are the priorities of Hydro Plus water softeners.

The lifespan of the resin bed, with correct softener use, can be up to several years. Service available throughout Poland!

✅ Applications:

• Water softening in houses and apartments, especially for households of 5 and 6 people
• Protection of plumbing systems, household appliances, fixtures, and heat exchangers

✅ Advantages:

• Reduction of salt and water consumption during regeneration by up to 30%
• Extended lifespan of the deposit thanks to perfectly even monospheric grains
• Protection of fittings, CO installations, household appliances and pipes against stone
• Lower heating bills by maintaining installation efficiency
• Less detergent consumption (approx. 50% less)
• Better condition of skin and hair – no dryness or irritation
• Improving the taste of food
• No need for descaling agents
• Possibility of space-saving management thanks to the connection adapter
• Stable operation even with very hard water
• Very long term of protection - check in the GUARANTEES tab

✅ Hydro Plus water softeners can handle any, even extremely hard water. They use a special ion exchange resin – monospheric with perfectly even grains (a renowned American manufacturer Dow or the German Levatit S1567 produced without the use of solvents by Bayer – resins especially recommended for households). Thanks to this, Hydro Plus devices are characterized by the highest softening efficiency, extended life of the deposit and lower by about 30%. demand for water and salt during regeneration in relation to softeners with traditional bed (polyphoric – resin grains of various sizes).

✅ Hydro Plus softeners are also larger deposits than in the case of standard solutions and better resin rinsing thanks to the use of the highest possible pressure cylinders.

✅The Hydro Plus devices are equipped with a modern and fully automatic Hydro Plus volumetric controller with a large backlit screen, built-in low salt alarm, internal water meter (pulse calibration possible) and in Polish support. The possibility of choosing one of as many as 6 types of deposit regeneration and manual adjustment of the duration of its individual cycles.

✅ The head counts the water intake and starts the regeneration process of the deposit at the right time. The standard also includes a by-pass with the possibility of mixing raw water with softened water and additional anti-flood protection in the form of a float brine valve.

✅In the standard by-pass with connections (angle or straight), mixing raw water with softened (Smart Soft) and two anti-flood protection. Additionally, the Easy Start function (quick start) and Top Hygienic, guaranteeing rinsing of the deposit even during a longer lack of water intake.

In addition, each Hydro Plus control head is marked with the PZH CERT symbol, which certifies the recommendation of the National Institute of Hygiene.

Soft water means higher comfort of life, real savings, health and environmental protection. With water softeners:

• bathroom fixtures, sinks, bathtubs and showers are clean and well-groomed effortlessly
• ovens, washing machines, dishwashers, kettles and coffee makers are protected and work seamlessly
• CO installation and radiators maintain their original efficiency, thanks to which we pay less for gas
• diameter of pipes in the house does not decrease due to limescale deposits
• We use much less cleaning and washing agents (approx. 50%. )
• save on means intended for removing tarnish from stone
• clothes stretch faster and are nice touch
• hair and skin are moisturized, there are no irritations and allergies
• dishes release a deeper taste

✔ Use parameters – amount of soft water between regenerations:

• 12 dH – 8,8 m³
• 15 dH – 7,0 m³
• 18 dH – 5,9 m³
• 21 dH – 5,0 m³
• 24 dH – 4,4 m³
• 27 dH – 3,9 m³
• 30 dH – 3,5 m³
• 33 dH – 3,2 m³
• 36 dH – 2,9 m³
• 39 dH – 2,7 m³

✔ Driver and functions

• 6 types of deposit regeneration
• Internal water meter (pulse calibration)
• Low salt alarm
• Smart Soft function – water hardness adjustment
• Top Hygienic function – rinsing the deposit during a longer break in collection
• Easy Start function
• Screen with backlight
• Support for in Polish

✔ Security and construction

• Double anti-flood protection
• Housing and pressure vessel with long-term warranty
• Possibility of connecting an external chlorinating adapter

✔ Transport and assembly

• Possibility of transport also in a lying position
• Shock and impact resistant housing
• Simple installation according to instructions
• Full telephone support of the service

⭐⭐⭐⭐⭐

Specifications and performance of the Hydro Plus 32: water softener

• connection: 1"
• type of ion exchange resin: Bayer monospheric Dow USA or Lewatit S1567
• quantity of resin in litres: 32
• automatic volumetric control head Hydro Plus
• dimensions: 32 cm (width) x 114 cm (height) x 55 cm (depth)
• 10x35" Eurotrol pressure cylinder
• Power Consumption: 9 W
• Operating pressure: 1,4 – 8,6 bar
• Operating temperature: 1 – 39 C
• maximum working flow: 2 m3/h
• efficiency between regen. at 15 dH: 5,9 m3 of water
• salt consumption for regeneration: about 4 kg
• water consumption for regeneration: about 160 liters
• pressure drop: 0,3 bar
• Salt storage capacity: 80 kg
• height at which the water inlet/outlet is located - 92 cm
• Polish in the driver menu
• driver screen with backlight
• built-in low salt alarm
• water meter with the possibility of pulse calibration
• regulation of water softening by mixing raw water with softened water (Smart Soft function) - angular connections (default) or straight (on request)
• original bypass valve by-pass equipped with a connection lock with the possibility of quick removal from the installation
• connection adapter for connecting the softener without by-pass (to a depth of "save" about 20 cm)
• double anti-flood protection: brine float valve and overflow on the tank housing
• Top Hygienic hygienic protection – guarantees rinsing of the deposit during a long lack of water intake
• Easy Start function - the ability to run the softener on the principle of "plug & play"
• 48-hour maintenance of the controller settings in case of power failure
• Detailed instructions for connecting, starting and using the softener
• full telephone support of our service during the start-up of the device and its use

We have all consumables and spare parts for the offered water softeners in our permanent offer.

1) Hydro Plus water softeners are equipped with a low salt level alarm. You activate it once in the control head menu, and after each salt refill, you enter how many kilograms you added. The softener calculates the resin regeneration cycles and if there are fewer tablets left in the tank than needed for three rinses, it will display a relevant message. Thanks to this modern solution, you no longer need to check the inside of the unit. For Hydro Plus softeners, two bags of tablet salt (50 kg) should be sufficient for 4 to 6 months of operation.

2) To enhance hygiene, Hydro Plus water softeners can be equipped with a head-controlled adapter that gently chlorinates the resin bed during regeneration. This feature is especially recommended if you have water from your own well or if the softener needs to be disconnected from power for extended periods.

3) Included in the set is a by-pass valve with angled (default) or straight (upon request) connections. The unit is also factory-equipped with a 1" male thread adapter for connecting the softener without using the by-pass – in this case, you will "save" approximately 20 cm of space in depth.

Each device sold by us is equipped with a set of documents confirming its authenticity and high quality of the components used. Please pay special attention to the hologram along with the unique serial number. It is located on the side wall of the control head or on the inside of the salt throw flap.

Each device in the Hydro Plus series has:

1. Water Technology hologram with unique serial number
2. Warranty card with specified model and serial number of the device compatible with the hologram
3. Detailed, dedicated instructions for connecting, starting and using the softener
4. A special sticker on the housing with the most important usage information, contact details of Technika Wody and a place to save the installation date

Our experienced service technicians are always at your disposal.

WE ADD FREE TO EACH SOFTENER PURCHASED

• very effective, efficient and hygienic 10" filter station (connections 1") for installation at the water softener - it removes all mechanical impurities (first stage of filtration - foam cartridge) and chlorine, phenols and pesticides (second stage of filtration - carbon cartridge, which additionally clarifies water, improve its taste and aroma)
• stock of replacement cartridges for a double filter station for several years of operation (12 foam cartridges 20 mik. and 6 activated carbon cartridges) - recommended cartridge replacement every 6 months
• Wrench for unscrewing bodies and mounting brackets for triple filter
• accurate, droplet tester for testing water hardness, which is enough for several dozen measurements
• 2 bags of tablet salt for deposit regeneration (total 50kg)
• original bypass valve by-pass
• 5-meter flexible hose for drainage of regenerative rinses for sewerage with mounting clamp

Only by using two 10-inch carbon filters (or one 20-inch) can we achieve a satisfactory effect of purifying water from the chemicals contained in it.

In addition, thanks to the modular design of the filter station, you can freely install the filter bodies included in it. For example, you can install all three filters before the softener or just one in front of the device (with foam pre-insert) and the other two (with carbon cartridges) behind it. This saves space for installation in a location where it is limited.

Specifications