Piegādes termiņš visā Lietuvā: 5-7 darba dienas.
Piegādes cena uz norādīto adresi: 3 eiro
Apraksts
Trumpai apie prekę
Prekė: Vandens nuotėkio jutiklis ZIGBEE 3.0 TUYA, veikia su baterijomis. Kategorija: Jutikliai.
- Gamintojas: Sone
- Modelis: 5905954837007
Our ZIGBEE Tuya flood/leak sensor will allow you to always verify whether the monitored place is safe, you will do it from anywhere on earth! Based on the sensor indications, you can control other devices that work with the TUYA application, e.g. overlay on the water valve, which will cut off the supply. Battery powered allows you to place the sensor anywhere, just ZIGBEE range and GATE. You can read all the parameters in the free TUYA application, installation is very simple and intuitive.
Monitor security in the context of a leak in your home, apartment, office, garage or Hall, it is possible to connect multiple sensors to one application and give them their own name, e.g. Kitchen flood sensor
With wireless connectivity, you can read information directly from the app on your smartphone.
Control is done using the Tuya or Smart life application or another application. (free download for Android and iOS).
The device is also compatible with Home Assistant via Zigbee2MQTT.
- ZIGBEE GATE REQUIRED
- Free App
- Wireless remote reading of information from the sensor
- ZIGBEE 3.0 Connectivity - Zigbee Gateway Required
- Compatibility with Home Assistant by Zigbee2MQTT
- 3 ways of installation: position, glue - double-sided tape (included), for screws to the wall (no screws included)
- Operating temperature: -10~50 degrees
- OUR SENSOR HAS THE ABILITY TO SEND NOTIFICATIONS IF FLOODING IS DETECTED!
- Small size: 70x25x20mm (element with battery) , 20x30mm (measuring probe), 93cm (wire length)
- Read history (alarms triggered)
- Cooperation with the TUYA and SMART LIFE application
- Control from anywhere in the world
- The ability to create scenes with other devices, e.g. Turn off the valve when a water leak is detected
- Reading Parameters in the application: flood detection, battery level (low/high)
- Mounting: double-sided tape included to stick the element with the battery.
- Low battery alarm
- Powered by two AAA batteries. 2 x AAA 1,5V (thin fingers)
- Scenes (automations) - control against specific conditions, e.g. Turn off the valve when a water leak is detected.
ZIGBEE 3.0 water flood/leak sensor. It will allow you to control security by being connected to a Wifi network or remotely from anywhere in the world. In addition, you can easily create smart scenes such as turning off the valve in an emergency situation based on the sensor indications (you also need a suitable valve cap for this). The compact size of 70x25x20mm will also allow you to mount anywhere - it is one of the smallest flood sensors ZIGBEE 3.0.
Our water flood/leak sensor presents real-time data and reading histories, we will be informed about the flooding in red, while when everything is ok, the color is blue.
- Monitoring of flooding in the bathroom, laundry room, garage and kitchen
- Continuous security checking in: home, apartment, garage, hall or office
- The sensor can also be used to measure the level of liquid in the tank using e.g. two sensors one recessed into the tank (about 80cm) and the other at the surface, giving them names (containing the depth of the sensor from the top of the tank), we will know at what level the liquid is located because the sensor after contact with the liquid will signal it.
By clicking the smart icon (marked in red) you will move to the scene settings. The scene is otherwise automatic action that will perform itself. Thanks to the possibility of connecting other devices, you can use them to close the water valve when a leak is detected.
- Detection of flooding
- Notification on the phone
- History of events
- Scene - setting the control dependence on the time of day or other factors selected by us
- OUR CONTROLLER also shows information about poor battery level
- Assembly in a flush-mounted box anywhere
Home Assistant / Zigbee2MQTT compatibility
Our sensor is compatible with Home Assistant and works via Zigbee2MQTT.
In the following screenshot you can see its parameters.
The sensor was added to Home Assistant using:
- Zigbee2MQTT
- Version Zigbee2MQTT: 1.42.0-2
- Zigbee dongles: SLZB-06
The device works with Tuya Smart and Smart Life – popular applications for IoT devices (Internet of Things)
Simple addition of the device - just hold down the button on it and search for it in the application.
The TUYA and SMART LIFE ecosystems are:
- The application works in Polish, you can add and control various smart devices in it
- The application works with a very wide range of devices
- Nearly 10 000 manufacturers
- 310 000 devices compatible with the app
- 30 categories that can include, among others: lighting, monitoring, air conditioning, heating
- The application is free and constantly developed with new features.
- Applications can be downloaded to iOS and Android devices.
Above all, it is intuitive operation and simple installation
Specifications
| Group | Name | Value |
|---|---|---|
| Parametry | Condition | new |
| Parametry | Invoice | With a VAT invoice |
| Parametry | Sensor type | inundation |
| Parametry | Series | TUYA |
| Parametry | Brand | Sone |
| Parametry | Power supply | batteries |
| Parametry | Communication | ZigBee |
| Parametry | Product weight with unit packaging | 0.035 kg |
| Parametry | Manufacturer code | 5905954837007 |
| Parametry | EAN (GTIN) | 5905954837007 |
| Parametry | Packaging status | original |
| Parametry | Batteries included | no |
| Parametry | Certificates of conformity | CE,WEEE |