Vandens siurblys gręžtuvui Milescraft, 1200 l/val.

Trumpai apie prekę

Prekė: Vandens siurblys gręžtuvui Milescraft, 1200 l/val.. Kategorija: Siurbliai.

• Gamintojas: Milescraft
• Modelis: 1313
• Galia: 0 W

The DrillPump300 1200 l/h from Milescraft is designed to work with most power drills at a maximum speed of 2800 RPM. /min. This water transfer pump is ideal for emptying small ponds, fish tanks, small swimming pools and even a flooded basement. Hose connection is 3/4" and uses any standard garden hose.

DrillPump300 :

• The device pumps up to 1200 liters per hour
• 1/2" (13 mm) / 3/4" (19 mm) hose connection
• Hose diameter 1/2" (13 mm) pumping height 15 m
• Shank Diameter 3/8" (9.5mm)
• Suction height 3 meters
• Rotation of the drill at least 600W
• Drill speed up to 2800 rpm
• Dry run for a maximum of 30 seconds

Attention:

• Drill can only run in clockwise direction, never run DrillPump in reverse direction
• The DrillPump does not rotate by hand, it must be fixed in the drill.
• The DrillPump must be mounted for proper use, do not hold it in your hand.
• Apply a small amount of silicone grease after each use. To refit, remove the black case screws and cover, and apply a little grease to the case where the rubber fan blades touch, then reassemble. Any spray lubricants such as WD-40 are not recommended as they do not provide sufficient lubrication for this product and may damage the internal components of the pump.
• Do not soak the drill or use the pump with flammable liquids.
• The flow direction is indicated by an arrow on the housing.
• The feed rate can be adjusted by the drill speed.

Specifications