12V akumuliatoriaus testeris, palaiko ECU įtampą keičiant

Trumpai apie prekę

Prekė: 12V akumuliatoriaus testeris, palaiko ECU įtampą keičiant. Kategorija: Baterijų testeriai.

• Gamintojas: 24Diag
• Modelis: Miernik ECU OBD2 Pamięci 12V B580 OBD Baterii

• Replacement of batteries with ECU memory.
• Detection of current leakage and recording of data and mileage up to 30 minutes.
• Display voltage on OBD2 pins.
• Professional battery analysis
• Alternator start-up and charging test.

The only such 5in1 tester on the market.

The device works in Polish.

Testing 12V and 24V batteries and wide measuring range from 2AH to 300AH

✅ 24DIAG B580 is a versatile, multifunctional diagnostic tool for cars.

They can be used to quickly replace the vehicle battery, preserving ECU memory data, extracting voltage values from OBD2 pins, detecting current leaks and professionally analyzing battery status.

The B580 makes vehicle maintenance and operation quick, simple and convenient.

✅Battery tester allows you to measure:

• Voltage and % battery charge/battery test
• start-up current / start-up test
• Alternator operation / charging test
• Battery resistivity/internal resistance

✅The set includes:

1. 24DIAG B580 tester
2. USB cable
3. Paper instruction in Polish
4. Original packaging

✅ Parameters:

• Operating voltage of the device: DC 8~30V
• Current Leak Detection Range: 15mA~5A
• Battery CCA Standard Range: 20~2000 CCA
• Circuit Limiter: 5A
• Battery Capacity Measurement Range: 2Ah-300Ah

✅ Features of 24DIAG B580:

➡ MULTIPLE BATTERY TESTS. Battery test, boot test, charging test. Full understanding of battery status.

➡ VOLTAGE TEST OBD. Possibility to display voltage values on the OBD interface pin.

➡ DETECTION OF ELECTRICAL LEAKS. Possibility to check the battery for leakage by observing the current.

✅Testing batteries in:

• cars
• Motorcycles
• on scooters
• scooters
• Alarm control panels
• Emergency UPS power supply
• Battery tools
• and many others.

✅Specification:

1. Working environment Temperature: 0*C to 50*C
2. Storage temperature: -20*C to 70*C
3. Housing material: acid-resistant ABS plastic
4. Battery capacity measurement range: 2Ah-300Ah
5. Voltage/Application: 12V and 24V
6. Input voltage: 8V~30V

✅Results of battery condition measurement in %:

• SOC - battery charge status
• SOH - degree of battery consumption

✅Power standards

• CCA 100-2000
• JIS 26A17--245H52
• DIN 100-1000
• IEC 100-1000
• EN 100-2000
• SAE 100-2000
• BCI 100-2000
• MCA 100-2000
• CA 100-2000
• GB 2-220AH

✅The method of use consists in performing a few simple operations:

1. We plug the OBD2 plug into the socket in the car in which we want to replace the battery.
2. On Anti-reset , select the Replace/Replace Battery function.
3. Crocodile clamps (frogs) are connected to an external battery. The battery should be at the same voltage as in the car in which we make the replacement.
4. We replace the battery, the power supply in the vehicle will be maintained.
5. After replacing the battery, we remove the cable from the OBD2 socket and crocodile clamps from the external battery.

✅Connecting cables:

• red (+)
• black (-)

✅ This device, thanks to advanced electronics, has capabilities comparable to expensive professional workshop testers, and even better.

1. The device works immediately after connecting to the tested power source.
2. Detects bad batteries.
3. Protection against poor pole connection. Poor connection will not break the tester/battery/car.
4. Direct battery test with charging drops. There is no need to fully charge the battery before testing.
5. The battery test is mainly aimed at analyzing the service life when calculating its current capacity and degree of wear. This will help you assess whether the battery needs to be replaced.
6. Thanks to the test, you will assess whether the battery powers the car with the right current at start-up and engine operation.
7. The charging test enables the analysis of the charging system in the vehicle to check whether the voltage in the electrical system is correct.

• CERTAIN GUARANTEE
• TECHNICAL SUPPORT
• GOODS OF ADEQUATE QUALITY
• POST-WARRANTY SERVICE IN POLAND

Specifications

Group	Name	Value
Parametry	Condition	new
Parametry	Invoice	With a VAT invoice
Parametry	Brand	24Diag
Parametry	Product weight with unit packaging	0.4 kg
Parametry	EAN (GTIN)	5904954303116
Parametry	Manufacturer code	Miernik ECU OBD2 Pamięci 12V B580 OBD Baterii