Pristatymo terminas visoje Lietuvoje: 5-7 d.d.
Pristatymo kaina nurodytu adresu: Pristatymas nemokamas
Aprašymas
Trumpai apie prekę
Prekė: Akmeninis belaidis smūginis gręžtuvas SDS+ su kaltu ir dėklu HAMMER. Kategorija: Perforatoriai.
- Gamintojas: Wuber
- Modelis: W04532 MŁOTOWIERTARKA UDAROWA SDS+ WIERTŁA 3X
- Įtampa: 20 V
✅ Comes with chisels - ready to go right away!
► Brushless Motor | ► SDS-plus Chuck | ► 2.8 J Impact Force | ► 4570 Impacts/min | ► 3 Operating Modes + Chisel Positioning | ► 6-Speed Adjustment | ► PULSE MODE | ► Drilling Depth Memory | ► VRS Vibration Reduction System | ► SOFT START | ► Overload Clutch | ► Depth Stop | ► Gyroscopic Sensor | ► 360° Auxiliary Handle | ► SOFT GRIP | ► LED Lighting | ► Share+ System 20 V | ► Case
⚠ The kit does not include a battery or charger.
🥇 Hammer drill belongs to the INDUSTRIAL line, i.e. the semi-professional segment WUBER: maximum quality and function at an affordable price.
⚙ Technical specification
- Producer: WUBER
- Product line: INDUSTRIAL
- Model: W04532
- Engine Type: Brushless
- Battery system: Share+ System 20 V
- Number of batteries included: 0
- Handle Type: SDS-plus
- Rotation speed: 0-1030 rpm
- Speed control: Yes - 6 degrees
- Stroke frequency: 0-4570 thighs /min
- Maximum impact force: 2,8 J
- Maximum drilling diameter in concrete: 26 mm
- Maximum drilling diameter in steel: 13 mm
- Maximum drilling diameter in wood: 30 mm
- Operating modes: 3 (drilling, impact drilling, chiselling)
- Chisel positioning: Yes
- Rotation direction: Right / left
- Pulse function: Yes
- Memorize drilling depth: Yes
- Soft start function: Yes
- Overload clutch: Yes
- Vibration reduction system: VRS
- Gyroscopic sensor: Yes
- Working lighting: LED
- Drill bits included: 3 pieces (8 mm, 10 mm, 12 mm), length 150 mm
- Chisels included: 2 pieces (pin and oblong)
- Net weight (without battery): 2,9 kg
⭐ High impact force and brushless drive
✅ Brushless motor ► You do not buy and replace carbon brushes, maximum energy efficiency.
✅ Maximum impact force 2,8 J ► Single impact energy crushes concrete with ease.
✅ Stroke frequency up to 4570 thighs. /min ► This is more than 76 strokes per second, so that the concrete descends with fine debris, and drilling proceeds evenly, without tugging.
✅ SDS-plus ► You can replace the equipment in a few seconds with one movement of the sleeve, without a key.
✅ Drilling in concrete up to 26 mm ► The upper diameter ceiling includes studs, anchors and passages for installation pipes.
✅ Gentle start ► Precise start without , thanks to the Soft Start system.
✅ Liquid trigger ► The harder you press, the faster it drills - you adjust the rotation with your finger within the selected degree.
✅ Three operating modes and chisel positioning ► All settings are at hand in one place.
⚡ Modern control panel and comfort of work
✅ 6-stage speed control ► You choose the rotation for the material: lower on a brittle surface, on a full 1030 rpm in concrete.
✅ PULSE mode ► You will drill a precise hole in the brittle material and center the drill at the start - without sliding on the wall from too much rotation.
✅ Depth memorization ► You click the clock button and drill the first hole, and the device remembers the measure. Others come out identical - the drive disconnects itself. Modern and comfortable.
✅ Scale limiter ► You set the rod to size in centimeters and drill exactly as deep as you need. Good old analog solution - if you prefer.
✅ Vibration reduction system VRS ► Attenuation reduces hand fatigue when chiseling and forging.
✅ ANTI-KICKBACK SYSTEM ► The gyroscope captures the uncontrolled rotation of the machine and stops the engine in a few milliseconds. It reacts faster than you.
✅ Overload clutch ► Disconnects the drive when the drill is locked in the material, and takes over the , so it will not twist your hand while working.
✅ Auxiliary handle with 360° rotation ► You work by holding the impact hammer at any angle.
⭐ With the WUBER hammer drill you will perform:
► Drilling holes for studs and anchors in concrete
► Drilling in wood and metal
► Glazing and terracotta
► Forging furrows for electrical installations
► Forgings for pipes and wires
⚡ Brushless motor: drive that makes a difference
The brushless motor does not have carbon brushes, which is the part that wears out the fastest. The drive loses less energy on friction and spark, so it heats up less and lasts longer on one battery.
What do you gain?
You don't buy brush sets and you don't give away the commutator replacement tool. You get a maximum faultless device.
⭐ Depth memorization
You click the clock button on the panel and perform the first drilling - the hammer drill remembers the measure from it. At subsequent openings, it disconnects the drive itself as soon as it reaches the same depth. You drill into the self-stop and move on to the next point.
The function works in all three operating modes: drilling, impact drilling and chiseling.
What do you gain?
The pegs sit in the wall at the same depth - none stick out, none hide too much. No more trimming the studs with a knife and hammering them by force.
⚡ ANTI-KICKBACK SYSTEM or modern gyroscope sensor
There is a gyroscopic sensor in the body of the machine. Non stop measures whether the hammer drill starts to rotate around the drilling axis.
You can turn the system on or off whenever you want by pressing the button on the control panel.
When it detects such movement, electronics cuts off power in a few milliseconds and brakes the engine. The tool stops before it can get out of your hands. To move on, just let go of the switch and press it again.
What do you gain?
Real protection against recoil when jamming the drill, also where the clutch itself would work too slowly.
⭐ Overload clutch: protection of the transmission from damage
In the transmission, between the motor and the spindle, the overload clutch works.
When the drill suddenly locks into the material, the torque exceeds the limit value and the clutch simply disconnects the drive. You will hear a characteristic rattle. It's a signal that security just worked.
What do you gain?
Protection of the transmission from damage and clearly weaker jerking in the wrists.
💪 Impact force of 2,8 J and 4570 beats per minute
SDS-plus cordless hammer drills at 20 V usually start at 1,8 J.
✅ Ours has 2,8 J, which is the whole joule more per single stroke.
However, the impact force alone does not determine the speed of work. It counts along with the frequency, and 4570 beats per minute is more than 76 beats per second, which is generated by our hammer.
What do you gain?
You buy a powerful device that reduces your working time.
⭐ SDS-plus holder or replacement of accessories without a key
The SDS-plus cap has grooves that go into the handle and transfer rotation. The drill is held in it, but not clamped rigidly - it can move a few millimeters back and forth.
This slack is intentional. Thanks to it, the beater hits straight into the end of the drill and all energy goes into the material.
SDS-plus is one of the most popular mounting standards. The handle only accepts attachments with this shank, and you can buy SDS-plus drill bits, chisels and cutters at any construction market.
💡 Before inserting, grease the handle with grease from the set - this reduces the wear of the balls and the handle socket.
⚡ Three operating modes and chisel positioning on one knob
The knob on the housing has four positions.
Three of them are working modes:
- Drilling without impact in wood, metal and plastics,
- Drilling with impact in concrete and stone,
- Chiseling with blocked rotations
Fourth position is the preparation for forging. You set the chisel in it at the angle you want to work in.
What do you gain?
The chisel blade is positioned parallel to the grout or perpendicular to the plaster, so you don't twist your wrist to hit the right angle.
⭐ Six-stage speed control
You set the rotation speed with the button on the panel, and the current stage shows the display. The range of 0-1030 rpm is divided into six settings.
Lower steps you choose for brittle surfaces and for materials that are easy to delaminate: glaze, stoneware, clinker and gypsum boards.
The highest degree is full rotation for drilling into concrete and stone.
Advantage?
You choose the rotations for what you are drilling into.
⚡ PULSE MODE: more convenient start of drilling in the material
When the mode is turned on, the tool outputs reduced energy impacts. Such an impulse punctures the starting point, instead of breaking the material from the first contact.
The drill centers in the designated place and the surface does not crack under the first impact. The vibrations are smaller, so the tool is easier to hold in one position.
What do you gain?
You make a hole exactly at the point you marked with a pencil.
⚡ VRS vibration reduction system
The handle is not bolted to the body rigidly. They are connected by movable elements with springs and flexible fenders, thanks to which the handle can "float" minimally relative to the machine.
When the beater hits the drill, the body vibrates, but this movement is taken over by the springs instead of hitting your hands straight.
What do you gain?
Less tired hands after an hour of forging and a more secure grip for longer jobs.
⚡ 360° auxiliary handle and SOFT GRIP coating
The auxiliary handle attaches to the clamp around the neck of the transmission. When loosened, it rotates a full 360° and locks in any position, so you can work as comfortably as you like.
Where the hands come into contact with the housing, a non-slip SOFT GRIP coating has been applied, which improves the firm grip of the tool.
⭐ LED Beam Focus System Lighting
The built-in LED lights up automatically when you press the trigger and lights the drilling point - you can see exactly where and how you are drilling, even in dimly lit places.
⚡ Share+ System 20 V
The hammer drill runs on Share+ System 20 V and Share+ System Industrial 20 V batteries - common to the entire WUBER series of tools.
With the same battery, you can power many of our power tools. The recommended cells are 4 Ah or 6 Ah.
The battery and charger are not included: both elements can be found in our other offers.
What do you gain?
If you already have a 20 V Share+ System battery, you buy the tool at a good price and plug the cell that lies in the workshop into it.
⭐ Transport case
When not working, the set lies in a sturdy plastic case. Each element has its own slot in the stamping.
What do you gain?
Order in the workshop and store the entire set on a minimum area.
⚡ Depth limiter with graduation
The metal rod sits in the handle clamp of the auxiliary handle, and its extension is set by pressing the green button on the side of the head.
The pitch is scaled from 0 to 24 cm, which allows you to conveniently measure the length of the stud on it and transfer the measure to the wall. You drill exactly as deep as you need.
What do you gain?
Repetitive holes - old, good solution for those who prefer such control over the tool and are used to it.
✔ Set includes:
► 1x Cordless hammer drill WUBER W04532
► 1x Auxiliary handle with depth limiter
► 3x SDS-plus drill bit (8 mm, 10 mm, 12 mm), length 150 mm
► Flat chisel 14 × 250 mm + spike 250 mm
► 1x PVC head protector
► 1x Advanced Lubricant Tube
► 1x Transport case
► 1x User manual in Polish
Specifications
| Group | Name | Value |
|---|---|---|
| Parametry | Condition | new |
| Parametry | Invoice | With VAT invoice |
| Parametry | Series | W04532 MŁOTOWIERTARKA UDAROWA SDS PLUS |
| Parametry | Brand | Wuber |
| Parametry | Functionality | 4-functions (drilling, drilling with/without impact, chasing, chisel indexing/locking) |
| Parametry | Power supply | rechargeable battery |
| Parametry | Supply voltage | 20 V |
| Parametry | Maximum power | 1100 W |
| Parametry | Impact energy | 2.8 J |
| Parametry | Handle type | SDS Plus |
| Parametry | Rotational speed | 4570 RPM |
| Parametry | Maximum drilling diameter in wood | 30 mm |
| Parametry | Maximum drilling diameter in concrete | 26 mm |
| Parametry | Maximum drilling diameter in metal | 13 mm |
| Parametry | Maximum diameter of core drilling | 26 mm |
| Parametry | Device weight | 2.9 kg |
| Parametry | Product weight with unit packaging | 5.2 kg |
| Parametry | Manufacturer code | W04532 MŁOTOWIERTARKA UDAROWA SDS+ WIERTŁA 3X |
| Parametry | EAN (GTIN) | 5906436762077 |
| Parametry | Batteries included | no |
| Parametry | Packaging status | original |
| Parametry | Certificates of conformity | CE |
| Parametry | Number of batteries | brak akumulatora |