Akmeninis perforatorius SDS+ su kalimo funkcija, 2J, akumuliatorinis

Trumpai apie prekę

Prekė: Akmeninis perforatorius SDS+ su kalimo funkcija, 2J, akumuliatorinis. Kategorija: Perforatoriai.

• Gamintojas: Ondragon
• Modelis: od9274

⚙ Technical data:

• Manufacturer: ONDRAGON

• Voltage: 48 V

• Rotary speed: 0-1100 rpm. /min

• Frequency of stroke: 4800 ud/min

• Single stroke energy: 2.0 J

• Attachment: SDS+

• Wood drilling capacity: 28 mm

• Concrete drilling capacity: 24 mm

• Metal drilling capacity: 12 mm

• Weight: ~3 kg

✅ DRILLING, IMPACT OR FORGING? ONE DEVICE THAT YOU CAN MATCH TO THE TASK!

Not every job requires the same way of doing things.

Sometimes you need to make a precise hole, other times the material puts more resistance, and even at other times it is necessary to forge or forge.

The ONDRAGON cordless hammer drill combines several operating modes in one device. Instead of changing the tool with each subsequent task, you set the appropriate mode and continue working.

Less equipment to wear. Less interruptions. More possibilities during renovation, assembly and workshop work.

✅ IS THE OUTLET TOO FAR AWAY? BATTERY POWER GIVES YOU THE FREEDOM TO WORK!

The extension cord tangles under your feet, the cable limits the range, and the lack of an outlet can stop working exactly where you need the tool most.

Battery power supply marked 48V allows you to work without a cable – in the workshop, garage, on the plot and in places where it is difficult to supply mains power.

You don't organize a station around the cable. You take the device where the task awaits.

More freedom. Less preparation. Working exactly where you need it

✅ ONE BATTERY IS DISCHARGED? THE OTHER ONE IS WAITING SO YOU DON’T HAVE TO FINISH THE JOB!

Worst time for a dead battery?

Always the one with a few more holes left, the last piece to forge or a task you can't leave unfinished.

That's why you get up to 2 48V lithium-ion batteries included.

When you use one, the other may wait prepared for the exchange. Instead of interrupting your work while charging, you replace the battery and continue the task.

Less downtime. Less nervous looking at energy levels. Greater willingness to work longer

✅ BATTERY WITHOUT CHARGER? HERE YOU GET A DEDICATED POWER SUPPLY INCLUDED!

An additional battery helps only if you can comfortably prepare it for the next use.

The set includes a dedicated charger that fits the batteries included in the set.

Once the job is done, you plug in the rechargeable battery and prepare the equipment for the next task.

You get all the basic components of the power system together – without having to look for a matching charger separately.

✅ TOOL, BATTERIES AND ACCESSORIES IN ONE PLACE – THE SUITCASE ENDS THE MESS!

The hammer drill lies on a shelf, the charger in a drawer, and the depth limiter disappears exactly when it is needed.

The carrying case allows you to store the device and the components of the set together.

Easier to move the set between the garage, workshop and work area. Once the task is complete, you put everything in one suitcase instead of looking for free space for each item separately.

Less mess. Less risk of losing accessories. The whole set is ready to take.

✅ REPLACING THE DRILL SHOULD NOT STOP WORKING – SDS-PLUS SPEEDS UP THE ASSEMBLY OF THE FIXTURE!

The classic handle requires tightening and checking each time that the drill has been properly fixed.

The SDS-Plus holder allows you to quickly mount a compatible drill or chisel without using a traditional handle key.

Changing the task? You take out one work piece, assemble another, and get back to work.

Less time wasted on tool operation. More time spent on proper drilling or forging.

• Lithium-Ion batteries do not need to be fully discharged before recharging. This is not possible with other battery types, as it shortens their lifespan due to the "memory effect."
• A Li-Ion battery retains over 80% of its charge for over 90 days when not in use. These types of batteries are 40% lighter and smaller than traditional ones.
• 2 BATTERIES INCLUDED

✅ THE TOOL ESCAPES TO THE SIDE? THE 360° HANDLE HELPS KEEP THEM UNDER CONTROL!

When working with a stroke, it is not only the device itself that counts. Equally important is stable handling and comfortable hand positioning.

The adjustable front handle rotates in the range of 360° allows you to adjust the position of the handle to the direction of work and the current task.

You can drive the hammer drill with both hands, gaining more reliable support and more control over the device.

Work vertically, horizontally or in a less comfortable position? You set the handle so that this tool fits you.

✅ EACH HOLE SHOULD HAVE THE SAME DEPTH? THE STOP HELPS TO STOP DRILLINĠBY EYE!

Behind the shallow hole means corrections. Too deep is unnecessary work and the risk of making a hole larger than the assembly requires.

The metal stop allows you to set the planned drilling depth in advance.

This makes it easier to make repetitive holes for studs, mounts, and other mounting hardware.

Less guessing. Less checking each hole separately. Greater repeatability of the work performed.

✅ ONE SETTING FOR EACH TASK? THIS IS AN UNNECESSARY COMPROMISE!

Ordinary drilling, impact drilling and forging require a different way of operation of the device.

Therefore, the hammer drill is equipped with a mode selector knob.

You have at your disposal, among others:

• drilling,
• drilling with impact,
• forging and forging.

You don't try to do every task with one setting. You choose the mode that suits your current work and use the device as needed.

One tool. Several uses. Less need to reach for more equipment.

✅ LONGER WORK DOES NOT HAVE TO MEAN CONTINUOUS IMPROVEMENT OF THE GRIP!

The hard, slippery handle quickly makes itself felt – especially when working with a stroke or in a less comfortable position.

The rubberized, non-slip finish of the handle helps to hold the hammer drill more securely in your hand.

The tool is easier to control and the grip remains more stable when drilling and forging.

Less hand improvement. More control. More convenient handling of the device during subsequent stages of work.

• ONDRAGON cordless hammer drill,
• 2 48V lithium-ion batteries,
• dedicated charger,
• adjustable front handle 360°,
• metal depth limiter,
• plastic transport case.

• battery power supply,
• battery system marked 48V,
• 2 batteries included,
• SDS-Plus holder,
• several modes of operation,
• drilling and impact drilling,
• forging and forging function,
• adjustable 360° auxiliary handle,
• metal depth limiter,
• rubberized handle,
• dedicated charger,
• transport case.

✅ DO NOT MATCH EVERY TASK TO THE TOOL – CHOOSE A TOOL THAT YOU WILL MATCH TO THE TASK!

ONDRAGON combines battery power mobility, SDS-Plus handle, several operating modes and the equipment needed for convenient work organization.

Drilling, having a stroke, or going forging. When one battery needs charging, you reach for the other. After finishing work, you put the set in the suitcase.

Less downtime. Less additional equipment. More freedom during subsequent renovation and assembly works.

Specifications