Akumuliatorių testeris su spausdintuvu, 6V/12V/24V, 2–300 Ah, j.PL

Trumpai apie prekę

Prekė: Akumuliatorių testeris su spausdintuvu, 6V/12V/24V, 2–300 Ah, j.PL. Kategorija: Baterijų testeriai.

• Gamintojas: 24Diag
• Modelis: MIERNIK B870 2-300AH 6V 12V 24V DRUK DO

The tester is compatible with batteries:

• Acid/Lead (regular/regular batteries)
• AGM flat/plate
• AGM spiral
• Gel
• EFB

Testing 6V 12V 24V Batteries

Wide measuring range from 2AH to 300AH

The only such tester known to us with such a wide measuring range.

10 languages available including Polish (English, Spanish, German, French, Italian, Russian, Portuguese, Japanese, Chinese).

The battery tester 24DIAG B870 allows you to measure:

• voltage and % battery charge / battery test
• state / quality / battery life
• start current / start-up test
• Alternator operation / charging test
• resistance/internal resistance of the battery

• CCA 100-2000
• JIS 26A17--245H52
• DIN 100-1000
• IEC 100-1000
• EN 100-2000
• SAE 100-2000
• BCI 100-2000
• MCA 100-2000
• CA 100-2000
• GB 2-300AH

Additional functionality 24DIAG B870:

• Printing measurement results with the possibility of personalizing the printout by the last 6 digits from the VIN number of the vehicle.
• Multimeter function.
• Quick battery test, option not available anywhere else.
• Preview and save the tests performed.
• Preview of parameters in the form of a graphic chart.
• One of the most interesting features is to take a screenshot (PrintScreen) by pressing two up and down buttons simultaneously for 3 seconds. We can take 5 screenshots and then connect the device with a USB cable to the laptop and print from the SNAPSHOT folder e.g. saved measurement, chart or other parameter whose screenshot we took.

Testing batteries in:

• Trucks
• Tractors
• Machinery
• Forklifts
• cars
• Motorcycles
• Scooters
• Scooters
• Emergency control panels
• Emergency UPS power supply
• Photovoltaic control panels
• Cordless tools
• and many others.

Specification:

1. Working environment Temperature: 0*C to 50*C
2. Storage temperature: -20*C to 60*C
3. Housing material: acid-resistant ABS plastic
4. Battery capacity measurement range: 2Ah-300Ah
5. Voltage/Application: 6V 12V 24V
6. Input voltage: 5V~32V

The set includes:

1. Tester 24DIAG B870
2. Solid lockable Case
3. USB cable to connect to your computer
4. Paper instruction in Polish
5. Two spare rolls of paper for printing measurements
6. Original carton packaging

No additional batteries and accumulators are needed to power the device, as it draws power directly from the tested car battery.

Cable connection:

• red (+)
• black (-)

We can connect the Tester even with clamps vice versa and the Tester will work properly and perform measurements normally. This is unheard of in other testers of this type.

Results of battery status measurement in %:

• SOC - battery charge status
• SOH - degree of battery consumption

This device, thanks to advanced electronics, has capabilities comparable to expensive professional workshop testers, and even better.

1. The device works immediately after connecting to the tested power source.
2. Detects bad batteries.
3. Protection against poor pole connection. Poor connection will not break the tester/battery/car. Even as the only one we know despite the palely connected measuring buckles, it will work normally and perform correct measurements.
4. Printing on 6V batteries is not possible due to too low voltage. The solution is to test the 6V battery and then print the recorded measurement on the 12V battery.
5. Direct battery test with charging drops. There is no need to fully charge the battery before testing.
6. The battery test is mainly aimed at analyzing the service life when calculating its current capacity and degree of wear. This will help you assess whether the battery needs to be replaced.
7. Thanks to the test, you will assess whether the battery powers the car with the right current at start-up and engine operation.
8. The charging test enables the analysis of the charging system in the vehicle to check whether the voltage in the electrical system is correct.

1. Simple and easy to use
2. Test the battery inside and outside the vehicle (selectable in the menu)
3. Large Easy-to-Read 2.8' Inch Color LCD Display
4. Test results based on CCA, CA, JIS, EN, DIN, SAE, IEC, BCI, MCA, GB standards.
5. Vehicle start-up system testing: start-up time, voltage and condition
6. Vehicle charging system test: load voltage, unloaded voltage
7. Range AH: 2-300AH

• Height: 22,5cm
• Width: 9cm
• thickness: 4,3cm
• length of measuring cables: 70cm

Quick battery test:

Battery test in the vehicle:

Charging/Waving Test:

Start-up/load test:

Preview in the form of a chart:

Preview of the last measurement:

Other settings and Multimeter Function:

• CERTAIN GUARANTEE
• TECHNICAL SUPPORT
• GOODS OF ADEQUATE QUALITY
• POST-WARRANTY SERVICE in Poland

Specifications