Anglies monoksido jutiklis Kidde K5CO, 10 metų veikimo laikas

Trumpai apie prekę

Prekė: Anglies monoksido jutiklis Kidde K5CO, 10 metų veikimo laikas. Kategorija: Jutikliai.

• Gamintojas: Kidde
• Modelis: KID-K5CO

CARBON MONOXIDE SENSOR: carbon monoxide detector - Kidde K5CO:

• Carbon monoxide sensor K5CO equipped with electrochemical sensor Kidde, guaranteeing the user 10-year service life.
• Battery power supply allows you to mount the detector in the optimal place in the room and provides protection even in the event of a power failure in the network.

Kidde K5CO CARBON MONOXIDE SENSOR - the most important features:

• Electrochemical technology - one of the world's most precise electrochemical sensors
• 40% longer operating period compared to other sensors available on the market
• Loud alarm signal
• Test/Reset button - to control and operate the device
• Battery power for protection even in the event of a power failure
• Possibility of mounting on the wall or placing the sensor on a flat surface
• Indication of incorrect operation and end of period of operation
• Low voltage power signal
• Additional LED - indicating malfunction of the device and the end of its service life
• Function informing about alarm activation in the last 14 days
• Simple installation and operation
• Small dimensions, low weight, aesthetic and durable housing
• Very low operating cost
• Construction mark B - National Certificate of Constancy of Performance confirming compliance with the Polish standard PN-EN 50291-1:2018+AC:2021
• BSI Certificate - confirming compliance with EN50291-1:2018

CARBON MONOXIDE DETECTOR Kidde K5CO - mode of action:

• Exceeding the permissible level of CO is indicated optically (red LED) and acoustically (loud, pulsed sound alarm with a force of 85dB).
• The device memory stores information about the detection of CO concentration exceeding the level of 100 PPM. Thanks to this, the user can check whether there was no carbon monoxide emissions during his absence in the room.
• The sensor has a test / reset button that allows you to check the operation of the device and reset the alarm signal.
• The fitness control system monitors i.a. on an ongoing basis: sensor, internal circuits and battery status.
• In case of malfunction or low battery charge, the yellow LED light flashes and a warning beep is activated.
• In addition, the Kidde K5CO sensor is equipped with a function that allows you to quickly check the correct response of the sensor to the CO test gas.

Kidde K5CO CARBON MONOXIDE SENSOR - practical housing and convenient installation:

• Thanks to the specially designed housing, in addition to wall mounting, the Kidde K5CO sensor can also be placed on a flat surface, e.g. on a nightstand near the bed.
• Don't worry about anything! You are safe! After 10 years of power activation, the sensor itself will remind you of the need to replace the device.

STAY SAFE! Choose a carbon monoxide sensor with all the necessary and required certificates!

• The K5CO carbon monoxide sensor is marked with the building mark B confirming its compliance with the requirements of the Polish standard PN-EN 50291-1:2018+AC:2021 for home carbon monoxide detectors.
• The research was carried out by Scientific and Research Centre for Fire Protection - National Research Institute im.Józefa Tuliszkowski (CNBOP-PIB).
• In addition, the detector Kidde K5CO is BSI certified, confirming compliance with the requirements of the BS EN 50291-1:2018 standard and issued by the British Standards Institution

Kidde K5CO CARBON MONOXIDE DETECTOR - where is the best place to install it?

• Install the Kidde K5CO chad sensor in any room where there are fuel burning devices.
• Additional sensors should be installed in rooms where we spend a lot of time, e.g. in the living room, living room and we all bedrooms.
• This is especially recommended if people staying in these rooms due to their location may not hear the alarm signal of the sensor activated in another part of the building.
• NOTE: it is also worth placing one carbon monoxide detector on each floor of the building and in each room through which the chimney duct passes!

Kidde K5CO - specification and technical data of the detector:

• Sensor: patented electrochemical CO sensor from KIDDE
• Alarm signal: optical - built-in red LED; acoustic - siren with sound intensity approx. 85 dB in odl. 3 m, 3.0 ~ 3.5 KHz
• End-of-life signal: optical - every 60 seconds the yellow LED flashes twice; acoustic - double, short beep every 60 seconds
• Indication of malfunction: short beep every 30 seconds and flashing yellow LED or continuous beep every 30 seconds
• Alarm activation memory: every 60 seconds a red LED flashes if the device has detected a CO concentration of 100 ppm or more in the last 14 days
• Test/Reset button - purpose: for controlling and operating the device; after pressing the button, the device performs a control test; for deleting the alarm activation signal stored in the device memory; in the case of alarm activation, it allows you to reset it
• Top concentration button: nie
• Sensor life: 10 years
• Display: no
• Mounting method: on the wall or as a freestanding unit, on a flat surface
• Housing: made of ABS plastic
• Additional functions: simulation test - allows you to test the sensor using the commercially available CO test gas
• Additionally included: batteries, mounting bracket, mounting pins, user manual
• Power source: 2 x 1.5V, AA alkaline batteries (included)
• Battery discharge signal: short beep every 60 seconds and flashing yellow LED every 60 seconds
• Working conditions: temperature from -10 to 45°C, humidity - up to 90% RH, non-condensing
• Storage conditions: temperature -20 to 60°C, humidity - 5 to 95% RH, non-condensing
• Dimensions: 127mm x 73mm x 39mm
• Weight with batteries: 162g
• Certificates and approvals: construction mark BBS EN50291-1:2018 - certification body BSIKM 738897CE
• EAN: 047871313419

Specifications