Atsarginės atminties kabelis JFIND OBD2, 3,4 m, 5A

Trumpai apie prekę

Prekė: Atsarginės atminties kabelis JFIND OBD2, 3,4 m, 5A. Kategorija: Baterijų testeriai.

• Gamintojas: JFind
• Modelis: JFINDKABEL PODTRZYMANIA PAMIĘCI AKUMULATORA

Convenient battery replacement without losing saved settings

The JFIND J0002 service cable is designed to support the power supply of selected car electronic systems during battery replacement. It allows you to connect an additional 12V power source via the OBD-II socket, which helps to reduce the risk of losing saved settings.

The product will work both in professional car workshops and during independent service work.

The most important features of the product

• Driver memory support – helps you keep your car electronics settings selected when disconnecting the battery.
• 3,4 m long cable – provides more freedom when connecting an external power source.
• OBD-II connector – allows you to connect the device to the vehicle diagnostic socket.
• Crocodile clamps – make it easy to connect an auxiliary battery to the poles.
• LED signaling – allows you to control the operating status of the device.
• Easy operation – the design allows you to quickly prepare the device for work.
• The JFIND brand is an accessory designed for service applications in automotive electrical installations.

What settings can be maintained?

Disconnecting the battery may cause the loss of some of the remembered parameters in some cars. Depending on the vehicle model, these may include:

• clock and date settings,
• programmed radio stations,
• memory of seat settings,
• selected settings of electric windows,
• settings of comfort functions,
• some adaptive data of controllers,
• other parameters requiring reconfiguration after power disconnection.

The JFIND J0002 cable helps reduce the risk of losing this data. The effect depends on the design of the car's electrical system and how the OBD-II socket operates the power supply.

Cable length 3,4 m

The long cord makes it easy to use the auxiliary battery set in a convenient place outside the vehicle.

Division of cable length:

• Main cable: 300 cm.
• Section with crocodile clamps: 40 cm.
• Total length: 340 cm.

This solution increases the convenience of work during battery replacement and other service activities requiring temporary power backup.

Connection instructions

Step 1. Prepare the power source

Prepare an efficient, properly charged auxiliary battery with a voltage of 12 V.

Step 2. Connect the terminals

After making sure the polarity is correct, connect the wires to the auxiliary battery:

• Red clamp – positive pole (+).
• Black terminal – negative pole (−).

Step 3. Connect the OBD-II connector

Place the device plug in the car diagnostic socket. Check the LED signaling and make sure the power backup is working properly.

Step 4. Replace the battery

After confirming the correct operation of the device, carry out the battery replacement in accordance with the procedure appropriate for the vehicle.

Step 5. Disconnect the device

After installing a new battery and restoring the correct power supply to the car, disconnect the OBD-II plug and then the auxiliary battery terminals. Be careful not to short-circuit.

Safety rules

• Before use, check whether the car allows the power supply to be maintained by the OBD-II socket.
• Always use a 12 V power source.
• Pay attention to the correct connection of the poles.
• Do not allow cables with metal elements of the vehicle to come into contact with the terminals or to short-circuit them.
• Do not start the motor and do not turn on receivers with high power consumption when using the device.
• Follow the battery replacement procedure recommended by the car manufacturer.
• If your vehicle requires a special service procedure or registration of a new battery, mere memory support may not be sufficient.

Technical specification

• Brand: JFIND
• Model: J0002
• Product Name: Battery Replacement Assistant
• Product Type: Memory Support Cable During Battery Replacement
• Connector Type: OBD-II
• Auxiliary supply voltage: 12 V
• Overall length: 3,4 m
• Length of main cable: 300 cm
• Wire length with clamps: 40 cm
• Current rating: 5 A
• Materials: plastic, electrical wires and metal clamps
• Color: Black and Red
• Signaling: LED
• Gross weight: about 0,3 kg
• Package Dimensions: 15 × 10 × 5 cm
• Purpose: vehicles supporting power backup via OBD-II connector
• Product Condition: Brand New

Contents of the set

• 1 × cable for supporting JFIND J0002 memory with a length of 3,4 m,
• integrated OBD-II plug,
• wires terminated with two crocodile clamps.

JFIND J0002 – a useful service accessory

The JFIND J0002 cable makes it easy to replace the battery, helping to keep the vehicle's electronic settings selected. The long cable, crocodile clamps and standard OBD-II connector make it a practical accessory for the car workshop and garage.

Important information: The product is only used for temporary power maintenance. It is not a charger, rectifier or boot device. Before use, make sure that the car is adapted to this type of connection.

Specifications