Automobilio paleidimo įrenginys ir oro kompresorius REEG Jump Starter 2in1

Trumpai apie prekę

Prekė: Automobilio paleidimo įrenginys ir oro kompresorius REEG Jump Starter 2in1. Kategorija: Paleidimo įrenginiai (boosteriai).

• Gamintojas: Reeg
• Modelis: REEG Jump Starter Air Pump 2in1

Instant start-up assistance 12V for passenger cars, quads, motorcycles and motor boats. The starter is equipped with a special security system m.in. before sparking and damage in case of improper connection of plus and minus poles. Thanks to its very simple operation, it will be an ideal solution for anyone who encounters a battery failure. With this device, a sudden discharge of the battery will no longer surprise you. You can start your car in seconds UP TO 40 TIMES ON A SINGLE CHARGE!

🔶EXTREMELY ROBUST CONSTRUCTION

🔶CONTAINABLE BATTERY 12000mAh

🔶 EASY TO READ DISPLAY

🔶 PRESSURE UP TO 160 PSI

Equipped with a high-performance integrated circuit and a powerful motor, the jump starter with electric pump provides 28 l/min airflow at 160PSI pressure. That’s 2x faster than other competing models. Full inflation of the car tire 205/55 R16 (0-36PSI) takes only 6 minutes, and refilling from 29-36PSI - 1 minute.

Built-in battery with a capacity of 12000 mAh ensures continuous pumping for 40 minutes. Quick coupler hose ensures its quick connection to the compressor.

• Battery: 44.4 Wh
• Maximum Intensity: 1000 A
• Charging: USB Type C, 10V
• USB Charging Power: 10W
• Output pressure: 2~160PSI / 0.1~11BAR
• Dimensions: 180x130x58mm
• Weight: 732g
• Operating temperature: -10 - 45 °C

You will start your vehicle perfectly and quickly, but also inflate the wheels in vehicles such as:

✔ car ✔ bike✔ electric bike ✔ motorcycle ✔ scooter ✔ electric scooter ✔ electric scooter

It also has a needle for pumping the ball.

✔ Multifunction starter device with 2in1 electric pump

REEG Jump Starter Air Pump 2in1

✔ Hose with AV adapter

✔ Adapter type presta

✔ Needle for pumping balls

✔ USB Type-C charging cable

✔ Starting cables

✔ Cover

✔ Operating instructions

✔ SAFE BOOT DEVICE

Booster has protections to protect both the vehicle and the built-in battery:

• protection against sparking
• protection in case of incorrect connection of plus/minus poles
• protection in case of short circuit of output terminals
• protection of internal battery and output cables against overload
• protection in case of overheating

✔ WIRELESS ELECTRIC PUMP

Used daily by service technicians to inflate wheels. The battery lasts for a long time, in the case of wheels in scooters for several dozen pumps. Installation of the hose is very convenient, making it quick to use.

✔ POWERBANK

It allows you to charge any compatible device while traveling or in other situations where it is not possible to connect to the electrical network. Compact size and light weight allow you to comfortably carry it always with you.

✔ FLASHLIGHT

You can easily start your vehicle or inflate the wheels in it, even at night or in low light. The device is equipped with a powerful flashlight, making it even more convenient to use.

How many times will you inflate the tires after a full charge?

✔ Car - 3-5x

✔ Motorcycle -13x

✔ Bike - 30x

✔ Ball - 88x

5 pre-set pumping modes (cars/motorcycles/bikes/balls/manual mode) can be easily switched depending on your pumping needs. The maximum pressure in manual mode is up to 160PSI (11 BAR).

Nylon braided mesh on the outside of the pumping tube effectively insulates the high temperature generated during operation of the device. Noise reduction technology allows the air pump to operate without excessive noise. The built-in LED light provides the convenience of pumping and changing tires in the dark.

✔ LED DISPLAY

The clear, large display shows many parameters.

• The green icon shows the battery status.
• Determined pressure
• Current pressure
• Unit of pressure
• Operating mode (car/motorcycle/bike/ball/manual)

✔ DEVICE EASY TO OPERATE

1. Connect the jumper wires to the power connector, the indicator will flash alternately red and green;

2. Open the car hood and clip the clips to the car battery accordingly.

The positive electrode connects to the positive electrode of the car battery, and the negative electrode connects to the negative electrode of the car battery.

3. Get in the car and start it.

4. After starting the car, immediately disconnect the starting power supply

✔ ADDITIONAL FAST CHARGING FUNCTION

• Input current of the device: 5V/2A, 9V/2A, 12V/2A, 15V/2A, 20V/2A
• It allows you to quickly charge your device, it is a useful solution that can be useful in emergency situations.

Specifications