Automobilio stiprintuvas VIBE POWERBOX65.4, tinka TOYOTA Auris, Aygo, Corolla, RAV4, Prius, Plug&Play

Trumpai apie prekę

Prekė: Automobilio stiprintuvas VIBE POWERBOX65.4, tinka TOYOTA Auris, Aygo, Corolla, RAV4, Prius, Plug&Play. Kategorija: Stiprintuvai.

• Gamintojas: Vibe
• Modelis: WZMACNIACZ PLUG&PLAY TOYOTA

Do you have a Toyota with a factory radio and basic audio system? Do you want to get a much better sound without replacing the radio, running new wires and interfering with the installation of the car?

This set has been prepared just for such users.

You get the original VIBE Powerbox 65.4 amplifier and a dedicated Plug & Play beam for Toyota and Suzuki cars. Installation consists only in removing the factory cube from the radio and connecting our adapter between the radio and the vehicle installation. No cutting wires, no soldering and no running power cable through the whole car.

This is one of the easiest methods to significantly improve the quality of the factory sound system.

The factory radio stays in place, you keep all the functions of the car and the original appearance of the cockpit.

The amplifier uses a High Level signal from the factory radio, amplifies it and transmits it to speakers with 4 × 65 W RMS at 4 Ω.

The effect can be heard immediately:

✔ much higher volume

✔ much better dynamics

✔ stronger and more controlled bass

✔ cleaner sound at high volume

✔ greater detail of music

You will get the best results with factory or replaced speakers with an impedance of 4 Ω. In practice, it also works correctly with branded 3 Ω speakers, but the manufacturer recommends using a 2 Ω load.

The set is designed for cars equipped with:

✔ factory radio

✔ basic 4-channel audio system

✔ no factory amplifier (e.g. without JBL system)

Installation is very simple:

• You take out the radio,
• you're gonna take out the factory cube,
• you plug in a dedicated Toyota Plug & Play beam,
• you connect the amplifier,
• You're putting the radio back on.

You do not cut the installation of the car, you do not solder the wires and you can restore the car to its factory condition at any time.

• Working Class: D
• Number of Channels: 4
• RMS power: 4 × 65 W at 4 Ω
• Maximum power: 520 W
• Frequency Response: 20 Hz – 20 kHz
• Crossover: FULL / HPF 80 Hz
• GAIN adjustment for front and rear channels
• Automatic Turn On (Auto Turn On)
• High Level Entry
• RCA output for further system expansion
• REM output +12 V
• Fuse: 20 A
• Dimensions: 187 × 82 × 37 mm

With its compact design, the amplifier can be easily hidden behind the dashboard or in any other convenient location.

✅ Compatibility

Toyota

Toyota 4Runner 2020->

Toyota Allion 2021->

Toyota Auris 2019->

Toyota Avalon 2018->

Toyota Aygo 2018->2022

Toyota Aygo X 2022->

Toyota bZ4X 2022->

Toyota C-HR 2019->

Toyota Camry 2017->2023

Toyota Camry 2023->

Toyota Corolla 2018->

Toyota Corolla Cross 2021->

Toyota Corolla Levin 2018->2024

Toyota Etios 2011->2023

Toyota Fortuner 2019->2023

Toyota Fortuner 2023->

Toyota Frontlander 2022->

Toyota Grand Highlander 2023->

Toyota GR86 2021->

Toyota GT86 2016->2021

Toyota Harrier 2020->

Toyota HiAce 2019->

Toyota Highlander 2019->

Toyota Hilux 2020->

Toyota Innova 2022->

Toyota IZOA 2018->

Toyota Land Cruiser 2021->

Toyota Land Cruiser Prado 2023->

Toyota Mirai 2020->

Toyota Prius 2016->2022

Toyota Prius 2022->

Toyota ProAce Verso 2016->

Toyota RAV4 2019->

Toyota Revo 2019->

Toyota Sequoia 2019->2021

Toyota Sienna 2018->

Toyota Supra GR 2019->

Toyota SW4 2020->

Toyota Tacoma 2020->2023

Toyota Tacoma 2023->

Toyota Tundra 2020->

Toyota Venza 2020->

Toyota Wildlander 2019->

Toyota Yaris 2017->

Toyota Yaris 2020->2025

Toyota Zenix 2022->

Suzuki

Suzuki Across 2020->2025

Suzuki Swace 2020->

Note: Fits vehicles without an improved sound system such as JBL.

During installation in our service, we usually set:

✅ GAIN front – about 15 o’clock

✅ GAIN back – about 15 o’clock

Leave the crossover switches in the FULL position if the car does not have a subwoofer.

If there is an additional subwoofer in the car, it is worth switching the channels to HPF 80 Hz, so that the speakers in the door will not be loaded with the lowest frequencies and will sound even cleaner.

✔ Original VIBE POWERBOX 65.4M amplifier

✔ Original Molex→ ISO beam

✔ Dedicated TOYOTA 059800 adapter

✔ Manufacturer's manual

Specifications